ICND1 – Drag and Drop
[am4show have=’p2;’]
Premium Member: You can test your knowledge with these questions first via this link.
[/am4show]
Question 1
[am4show have=’p2;’]Various protocols are listed on the left On the right are applications for the use of those protocols. Drag the protocol on the left to an associated function for that protocol on the right (Not all options are used)
Answer:
[/am4show]+ ARP: A PC sends packets to the default gateway IP address the first time since the PC turned on.
+ ICMP: The network administrator is checking basic IP connectivity from a workstation to a server.
+ DNS: The TCP/IP protocol stack must find an IP address for packets destined for a URL.
+ DHCP: A network device will automatically assign IP addresses to workstations.
Question 2
[am4show have=’p2;’]Move the protocol or service on the left to a situation on the right where it would be used. (Not all options are used)
Answer:
[/am4show]+ NAT: A PC with address 10.1.5.10 must access devices on the Internet.
+ DHCP: Only routers and servers require static IP addresses. Easy IP administration is required.
+ DNS: A PC only knows a server as MediaServer. IP needs to send data to that server.
+ OSPF: A protocol is needed to replace current static routes with automatic route updates.
Question 3
[am4show have=’p2;’]Drag the definition on the left to the correct term on the right. Not all definitions on the left will be used.
Answer:
[/am4show]+ SNMP: a protocol used to monitor and manage network devices
+ FTP: a reliable, connection-oriented service that uses TCP to transfer files between systems
+ TFTP: a connectionless service that uses UDP to transfer files between systems
+ DNS: a protocol that converts human-readable names into machine-readable addresses
+ DHCP: used to assign IP addresses automatically and set parameters such as subnet mask and default gateway
Question 4
[am4show have=’p2;’]Drag the appropriate command on the left to the configuration task it accomplishes (not all options are used)
Answer:
[/am4show]
| service password-encryption | encrypt all clear text passwords |
| line console 0 password friendS0nly |
protect access to the user mode prompt |
| enable secret noWay1n4u | set privileged mode encrypted password |
| line vty 0 4 password 2hard2Guess |
set password to allow Telnet connections |
| enable password uwi11NeverNo | set privileged mode clear text password |
Question 5
[am4show have=’p2;’]On the left are various network protocols. On the right are the layers of the TCP/IP model. Assuming a reliable connection is required, move the protocols on the left to the TCP/IP layers on the right to show the proper encapsulation for an email message sent by a host on a LAN. (Not all options are used)
Answer:
[/am4show]+ application layer: SMTP
+ transport layer: TCP
+ internet layer: IP
+ network access layer: Ethernet
Q4: Answers need to be reworked. Little hard to follow. Please revise.
I guess the answer for Q1 should be
RARP: A PC sends packets to the default gateway IP address the first time since the PC turned on.
As the PC is turned on for the first time, it needs an IPv4 address. So it will send an RARP request to the Default Gate way to get an IP. Please advise.
I agree with Veera
RARP – Reverse Address Resolution Protocol is a protocol using which a physical machine in a LAN could request to find its IP address from ARP table or cache from a gateway server.
Actually in case of static IP address host will send a ARP or else if IPv4 is not known it will send a RARP, it really do depend
@9tut,
Can you add this as a Drag and Drop Question:
Holddown Timer – Prevents a router from improperly reinstating a route from a regular
routing update.
Split Horizon – Prevents information about a route from being sent in the direction from
which the route was learned.
Defining a Maximum – Prevents invalid updates from looping the internetwork indefinitely.
Route Poisoning – Causes a routing protocol to advertise an infinite metric for a failed route.
Triggered Update – Decreases convergence time by immediately sending route information in
response to a topology change.
Anyone,
I plan on taking exam next week. What other sims/labs did you get besides the OSPF 6 router?
Thanks in Advance!
@Veera, Shrpshtr; Probably wouldn’t be RARP. “Diskless machines that do not have a configured IP address when started typically use RARP. RARP requires the existence of a server that maintains physical-to-logical address mappings.” – CCENT_Exam_Cram _Exam_640-822
@CertBound,@ Anadi
Thank you. But the purpose/definition of ARP is to find the destination address right? Why does A PC sends ARP packets to the default gateway IP address the first time since the PC turned on, when it doesn’t even have a source address? And again I appreciate you taking time to answer the questions…….:-)
@Veera
ARP is used to find the destination MAC address, of which the default gateway is not known on first boot.
^^^^
Actually, that’s only true for hosts on the local network. If it’s elsewhere, then, in order to use the router, the router’s MAC address has to be determined. The MAC address for a host on other than the local network is never known nor relevant.
Passed my 100-101 exam today and none were from drag and drop all the best
@fez
Was there any drag and drop questions on your ICND1 exam?
No none were there…
I’m taking the exam tomorrow. Are there any new questions?What about the SIMs?
Got 986/1000 Marks, {5/16/2014} 50 Questions, Ospf Sim, Security simlet, and Router and switch Simlet Was also there…..All questions From 9tut. and Examcollections…..Now Heading For Icnd2 And Blogging…..
For Any Help.
Manohar Tn
Website: http://www.techlinko.com
G+ : https://plus.google.com/u/0/+ManoharTN9/
Guys you should get free dumps and many other helping materials from [ http://adf.ly/o7ba3 ]
Its a direct and safe download and the download speed is ultra high.
Also the dumps is super easy to download.
Enjoy.
Drag and drop is easy. Basic networking. Know it.
Question 5 needs some work.
Transport: TCP and UDP.
Application: SNMP, and SMTP
Internet: IP
Network access: Ethernet and ARP
questions 3 and 4 were in the exam 19/07/2014
Question 4 looks wrong for the Line Con 0 answer…that protects access via console, not user mode right? Wouldn’t it be “login password” to protect access to the user mode prompt?
Took exam yesterday and question 5 was on exam
Tim jones???
Whats going on with Q 5?
All of the listed protocols can be assigned layers there.
Transport: TCP and UDP.
Application: SNMP, and SMTP
Internet: IP
Network access: Ethernet and ARP
? 9 tut advise pls
ah scrub that I misread the question, it says email message!
Kiy77 have a look at here, page 34: http://cs.oberlin.edu/~dadamson/ccna/ccentbook/Chapter4_IntroIOS.pdf . It will answer your question.
Tark,
The question is asking “assuming a reliable connection is required”, which means only protocols that are under TCP (connection oriented) vs. UDP (connectionless). So we can rule out UDP, SNMP, TFTP (not listed but still UDP protocol) and DNS (conditional).
Hi, taking an exam next week, if anyone can share with dumps I would be grateful! Cheers
hey guys im planning on taking the exam soon, please send me the latest dump
I took my ICDN1 EXam on Jan 30th and passed with 838 points.OSPF simulations.no configurations required just master the view commands.
Can someone forward the latest dump lai.austin@me.com
Please Please send me the latest dump jconst@yahoo.com
Hello people. i really need dumps for ICND1 exams…. am scheduled for next 2 weeks.. Gracias amigos.. chiemelaogu@yahoo.com
is Q5 correct?
Please can anyone send me latest icdn 100-101 dumps in my emaill. im writing soon
sagheer.2000@yahoo.com
Please can anyone send me latest icdn 100-101 dumps in my email. Thanks you guys at none818@yahoo.com
Hi I take the test on April 10th can someone please send me the latest 100-101 dumps thanks peddavis@me.com
q1 in icnd1 exam
Assuming a reliable connection–(why q5 is correctly done)
we will then use TCP and not UDP
Q1,2,3,4 in exam
guys i got free dumps with nuggets from this following link
wurl. cc/dumps
Have they changed the test?
@9tut Have that changed the test?
I like what you guys are usually up too. This kind of clever work and reporting! Keep up the amazing works guys I’ve incorporated you guys to my own blogroll.
De gros Bounce Noir Hommes http://www.vegablu.com/file/config.php?Mythiques-Bounce-Noir-Hommes-t-3782_2685.html
Hi Guys, i didnt encounter a drag n drop at my exam last week. Thanks.
hi
iam attending to have my exam next week,
can someone send me new dumps
Saima
Where are the questions? i can see only answers.
@ HACKER the ? are in the premium member site. need to opt in
@Hacker this is drag and drop, you just need to know what to match with what.
Hey, I’m about to take the test, has anyone taken it recently? Have the latest dumps?
Get CCNA Interconnecting Cisco Networking Devices 1 (ICND1) exam questions from https://www.dumps4download.us/free-100-101/cisco-question-answers.html
I am prep’ing for ICND1. I have viewed Jeremy C’s stuff and been following this blog. Any other suggestions?
Question 5
On the left are various network protocols. On the right are the layers of the TCP/IP model. Assuming a reliable connection is required, move the protocols on the left to the TCP/IP layers on the right to show the proper encapsulation for an email message sent by a host on a LAN. (Not all options are used)
UDP Application Layer
SNMP Transport Layer
IP Internet Layer
ARP Network Access Layer
Ethernet
TCP
SMPT
answers:
+ application layer: SMTP
+ transport layer: TCP
+ internet layer: IP
+ network access layer: Ethernet
Question says ” move the protocols on the left “I would say Ethernet is not a protocol ARP is; should it not be:
+ network access layer: ARP
any help appreciated
Just took the ICND Part 1 and passed. A couple of questions i’ve never seen before:
1. What is a component of Cisco Express Forwarding.
— I think the answer was FIB
2. What are the first bits of a unique local IPv6 address?
— Many options, option 1 was: “00000000”. You basically want the binary of fec0::/10
hi guys,
can someone send me the dumps according the answers of this site for ICND1 and other material???? please please please. I really neeeeeeeeeeeeeeeed it. heeeeelp me please . I’m sad 🙁 🙁
my email address is jane_woken52 @ yahoo.com (no spaces before and after @ sign)
🙁 🙁
Hello engineers..
Can you tell me what are the speed of this wires.
Twisted pair, coaxial, usb,fiber optic.. this question is under drag and drop..need help
@Anonymous where did u see this question
Hello All,
The same question about the type of the cables Twisted pair,coaxial,usb,fiber optic fell to me today ,when i gave the ICDN1 exams 100-105.Any help pls?
@Thomas
What was the question I can maybe help you ?
speed of 10base-T ; 100base FX and 100base TX?
Hello Gareth,
Thank you for the reply.
It has to do with ehthernet type(100base FX ,TX etc) and with what kind of type(inshielded twisted pair,etc).
@Thomas what was the other cables ? 10BASE5 and coaxial?
what cable use in star topology?(select two)
a.10 base2
b.10 base5
c.100 base2
d.100base5
Hello Guys please help me if any have latest DUMPS send me that email. {email not allowed}
@papapu
10BASE-2 Thin (RG-58) coaxial Bus
10BASE-5 Thick coaxial Bus
10BASE-T Cat 3 UTP or better Star
100BASE-TX Cat 5 UTP or better Star
1000BASE-TX Cat 5 UTP or better Star
1000BASE-TX Cat 6a UTP or better Star topology
PLEASE ….send me latest dump for icnd1
ethernet frame size?byte
a.1522
b.1514
c.128
d.68
a.1522
Hi, can anyone please forward me the latest dumps for ICND1. I have my exam on 16th october,2017. Please help
email :gpkaur.engg at gmail dot com
Hi, can anyone please forward me the latest dumps for ICND1 to my email {email not allowed}. I have my exam on 17th October, 2017. I took ICND1 a month ago I scored 824 so I missed it by 8 points.
Thank you, guys.
I am taking my exam on Dec 6th 2017, Please anyone help and send me the latest dump to {email not allowed}
I am taking my exam on Dec 6th 2017, Please anyone help and send me the latest dump to
mani.subramanian80 at gmail dot com
hi guys can i please have the latest dumps ,i am writing on the 20th of december email {email not allowed}
hi guys can u please help me with the latest icnd1 dumps….masingi12345 @ gmail .com
New 100-105 Exam questions VALID and please please and yours guys that you remember please!!!
Ethernet frame size 802.1q trunking.
a.1522
b.1514
c.128
d.68
Answer = 1522
Which IPv6 address is public?
Multicast
Link-local unicast
Site-local unicast
Global unicast
Address type Binary prefix IPv6 notation
Unspecified 00 . . . 0 (128 bits) ::/128
Loopback 00 . . . 1 (128 bits) ::1/128
Multicast 11111111 FF00::/8
Link-local unicast 1111111010 FE80::/10
Site-local unicast 1111111011 FEC0::/10
Global unicast (everything else)
Drag and Drop
USB = phiralel
Coaxial = Base 5
Fiber optic = All bases without a T have an X in it (1000Base LX)
Twisted Pair = All bases with the T (1000Base TX)
Crossover = Connection with same devices
New 100-105 Exam questions VALID and please please and yours guys that you remember please!!!
Ethernet frame size 802.1q trunking.
a.1522
b.1514
c.128
d.68
Answer = 1522
Which IPv6 address is public?
Multicast
Link-local unicast
Site-local unicast
Global unicast
Address type Binary prefix IPv6 notation
Unspecified 00 . . . 0 (128 bits) ::/128
Loopback 00 . . . 1 (128 bits) ::1/128
Multicast 11111111 FF00::/8
Link-local unicast 1111111010 FE80::/10
Site-local unicast 1111111011 FEC0::/10
Global unicast (everything else)
Drag and Drop
USB = phiralel
Coaxial = Base 5
Fiber optic = All bases without a T have an X in it (1000Base LX)
Twisted Pair = All bases with the T (1000Base TX)
Crossover = Connection with same devices
The most powerful one
a. Connected
b. Static
c. EIGRP
ANSWER = “Connected” from my side because the one with the lowest default distance value is the most better/ reliable one
New 100-105 Exam questions VALID and please please and yours guys that you remember please!!!
Ethernet frame size 802.1q trunking.
a.1522
b.1514
c.128
d.68
Answer = 1522
Which IPv6 address is public?
Multicast
Link-local unicast
Site-local unicast
Global unicast
Address type Binary prefix IPv6 notation
Unspecified 00 . . . 0 (128 bits) ::/128
Loopback 00 . . . 1 (128 bits) ::1/128
Multicast 11111111 FF00::/8
Link-local unicast 1111111010 FE80::/10
Site-local unicast 1111111011 FEC0::/10
Global unicast (everything else)
Drag and Drop
USB = phiralel
Coaxial = Base 5
Fiber optic = All bases without a T have an X in it (1000Base LX)
Twisted Pair = All bases with the T (1000Base TX)
Crossover = Connection with same devices
The most powerful one
a. Connected
b. Static
c. EIGRP
ANSWER = “Connected” from my side because the one with the lowest default distance value is the most better/ reliable one
what cable use in star topology?(select two)
a.10 base2
b.10 base5
c.100 base2
d.100base5
10BASE-2 Thin (RG-58) coaxial Bus
10BASE-5 Thick coaxial Bus
10BASE-T Cat 3 UTP or better Star
100BASE-TX Cat 5 UTP or better Star
1000BASE-TX Cat 5 UTP or better Star
1000BASE-TX Cat 6a UTP or better Star topology
New icnd1 Questions
Hey guys these are new questions i encountered in icnd1
1) something about syslog severity levels
2) which layer 2 domain does this address belong to? (an ipv4 address is given)
3)Topology type that has every device connecting to multiple nodes? (star, ring bus, etc)
4)drag and drop cabling (coaxil, fiber, twisted, usb, crossover)
5)Ethernet frame size?
6)Which ipv6 address is public (multicast, link-local unicast, site-local unicast, Global unicast)
Thank you Madman01 now that’s what I’m talking about and I’ll also post more
The one of syslog was asking what wasnt presented in the syslog.
I only remember 2 of the possible answers. Host name and date/time
What is a 6to4 tunnel and what ip version should the end tunnel be?
What symbol does the PING command issue when…(forgot the kicker)
* , . , ? , U
Thanks Madman01 Realy new valid questions about topic
Hello guys, please can you help me if any new questions, my exam date is Feb 17th
Hi guys, there was drag and drop Q that contained the following:
Verbose
Strict
Loose
Report
I cannot recall the rest of the Q, has anyone ever seen this? This was so vague.
@FMK chect this out https://www.cisco.com/c/en/us/support/docs/ip/routing-information-protocol-rip/13730-ext-ping-trace.html
Verbose is automatically selected along with any other option.
Record is a very useful option because it displays the address(es) of the hops (up to nine) the packet goes through.
Loose allows you to influence the path by specifying the address(es) of the hop(s) you want the packet to go through.
Strict is used to specify the hop(s) that you want the packet to go through, but no other hop(s) are allowed to be visited.
Timestamp is used to measure roundtrip time to particular hosts.
@XYZ, thank you so much!
Guys need hep am writing my exam nex week
Rescue pls
PDF with the latest dumps for CCNA on https://www.9tut.net/icnd1-100-105/new-icnd1-basic-questions-2 post from Irina
It would be advantageous for y’all to add a diagram of a TCP packet because I got a drag-n-drop to fill in the pieces of one just today.
Just pass the CCENT exam, thanks 9tut