Share your ICND1 v3.0 Experience
The ICND1 100-105 exam has come to replace the old ICND1 100-101 exam. We create the “Share your ICND1 v3.0 Experience” for everyone to share their experience after taking this exam.
Please share with us your experience after taking the ICND1 100-105 exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
@PL413r
ARE YOU Premium Member of 9Tut.net
@CISCOTTE
no man, I am poor 🙂
@PL413r
ABOUT THIS??
https://drive.google.com/drive/folders/0B0-Jnv9tt72lZ2F3dXowQnBzM1U
171q and last valid dump pdf and vce with vce player (just remove the ‘-‘)
a-d-f-.-l-y-/-1-f-z-y-A-T
on nov 23, 2016 i took and passed the 100-105 exam on the first attempt.
i was given 63 questions to complete in 90 minutes. Their passing score is 832
i used the following studying tools to study for this exam
1. this web site’s Premium Membership
2. PL version 16.061 — 274 questions
There were material covered in this exam that I did not encounter in PL or PM.
I would still recommend using PL and PM as a studying tools.
Just like this web site states “This exam is new so it will need some time to put up materials for this exam.”
Hi everyone,
I’ve been studying for my the iCND1 and recently came across this site. Thanks to everyone for posting the dumps etc!!! This may have been answered earlier in the comments, but just going through the 274Q PDF and wondered what people thought of this Q:
Which two characteristics describe the access layer of the hierarchical network design model?
A. layer 3 support
B. port security
C. redundant components
D. VLANs
E. PoE
They say B&D, but i wasn’t too sure if E could be an answer too?
@Tony
Which two characteristics describe the access layer of the hierarchical network design model?
A. layer 3 support
B. port security X
C. redundant components
D. VLANs X
E. PoE (its a l1 device)
How do I know?
– The devices in access layer are switches,
and switches are l2 devices and
port security and vlan are a l2 functionality.
@PL413r
all sims here
https://drive.google.com/file/d/0BxEyulNYJ45MOUZMRVVVcm9KcEk/view?usp=sharing
https://drive.google.com/file/d/0BxEyulNYJ45MWGE5X0ZCdll5U2M/view?usp=sharing
https://drive.google.com/file/d/0BxEyulNYJ45Mb19JQ2I3RjhQdUU/view?usp=sharing
https://drive.google.com/file/d/0BxEyulNYJ45MRmQ0WDJMNUNwc1E/view?usp=sharing
@ Dimie, sorry that you didn’t get it this time. use your test results and work on areas you scored less. as for the CEF question. I would say (A) – IP redirecting not working
(CEF) Cisco Express Forwarding (also known as topology based switching):
Forwarding table created in hardware beforehand. All packets will be switched using hardware. This is the fastest method but there are some limitations. Multilayer switches and routers use CEF.
CEF uses IP’s since it is a layer 3 switching mechanism.
@PL413r
Thanks for your answer. That makes sense to me! 🙂
I saw you said about learning the sims earlier – do you have a copy of these?
PL or PM?????????????????????
Just passed the exam yesterday..lots of new questions but 80% came from here..i will post new questions what I remember…thank you all..
Recently did Exam…. Im going to say about 75% of new questions lol…. lots of questions that are above ^ tho, i passed but thankful i found this website becuase i recognize a lot of questions from the exam that are here. Someone should make a pdf dump of all the questions above, just my recommendation.
Passed the test, but at least 25% of the test wasn’t covered here. I absolutely wouldn’t recommend studying just this forum and the dumps if you plan on passing. Most of the new content aren’t covered in those resources. Know the material. It will probably help you at your job as well. Just my advice trying to save people some money.
@PL413r
P.S. Free 200-125 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=0B-ob6L_QjGLpeHlmcExhU2FVY00
????????????????????????????????????????????
I’ve just got to ~Q140 in the VCE Plus 274Q dump, and there are a lot of questions on OSPF. We don’t need top know that for this exam do we?
Thank you for sharing the dumps, as soon as I study all subjects I will test my Knowledge on those!
@PL413r
Hi PL, I have posted this Link because, since you’re NOT a Premium Member, I DON’T KNOW if you have access to thoses other POSTs???
I have looked through several pages.. but there are so many here..
Does anyone have updated CBT Nuggets? I am looking for the version 3 videos.. Please help
What dumps do you recommend for passing ICND1?
@PL413r & U2!!!
JUST CAME BACK HOME FROM THE TESTING CENTER: PASS 860 ( ONLY!!!!! )
PS: WILL TELL YOU MORE ABOUT LATER!!!!!
I failed the ICND1 exam on Friday (25th) – one new question that I hadn’t seen before was regarding 6to4 tunnelling. The question was, are both ends of the link meant to fully support IPV6?
I had the disable CEF question as well as the 6to4 tunnelling, not sure what the correct answer was.
6to4 tunneling – both ends need to support ipv4
@PL413r & U2!!!!
As I said today, “JUST CAME BACK HOME FROM THE TESTING CENTER: PASS 860 ( ONLY!!!!!) “
However, because Exams codes were changing:
I have passed ICNDv2.0 (200-101) on September 17, 2016 (that was a must take and pass the exam before September 24, 2016) & ICND1 v3.0 (100-105), Today.
Yes, you might thing that is a little bit foolish!! Yes I did this way because I FAIL (by 50points) my CCNA (200-101) on August 20, 2016 which was last day to take before VERSION3
Regarding the test today, a lot of new questions that I have never came across!!!
Like Peter, I had the disable CEF question as well as the 6to4 tunneling, NOT SURE that I had the correct answer too!!!!
Otherwise, this forum is very useful to keep up with what is up to date!
Thanks 9Tut.net A special, special thanks to PL413r and everyone who are making effort to help each other!!
Thanks again!!!!
TYPO CORRECTION:
Yes, you might thing that is a little bit foolish!! Yes I did this way because I FAIL (by 50points) my CCNA (200-105) on August 20, 2016 which was last day to take before VERSION3
Ciscotte, congrats!
@noes
YES! EXCACTLY what I answer for my test: ” 6to4 tunneling – both ends need to support ipv4
@Kevin
Thanks K!!!! YOU NEXT!!!!!
Ciscoette- good job – see you in the icdn2 forum in a few weeks!
Thank you So much @sophia for recommending me http://www.pass4surekey.com/ for my exam preparation, I passed my exam here’s my score (1000/950)
@CISCOTE
Congrats bro, very good… welcome to CISCO certified world, glad I could help you somehow!
Let´s for for ICND2 now man.
@CISCOTTE and ANONYMOUS
Thanks for sharing the dumps
@Tony Dean
Here it is (questions 576 on)
h t t p : / / w w w . c i s c o b r a i n d u m p . c o m /7-nov-2016-update-200-125-dumps-with-vce-and-pdf-for-free-update-questions.html
@CISCOTTE
So are you CCNA now or you still need to take ICND2 v3?
@PL413r
YES I’m!!! In fact I just got 2 emails from CISCO saying exactly:
” Congratulations on Your Cisco Certification ” You’re NEXT dear PL!!!!!
can anyone please provide dump for icnd2 200-105??
” Congratulations on Your CCNA Cisco Certification ” You’re NEXT dear PL!!!!!
@UALL & U2
Just to let you know that I got DRAG & DROP too about CABLE & Wifi. About 10q.that you to ding in for it!!! have
SORRY 4TYPO!!
Hi can anyone please forward me Dave’s dump, I have been looking for it across all the pages. Gave my ICND 1 exam and scored only 700, at least if anyone could please forward me Dave Simulation or provide me the link as I would be appearing the exam next week
please whats latest on icnd1 exams
Hi Ciscotte, what kind of questions about cable & wifi..?? do you have examples
@Dimie
Example would be: Fiber and Coax cable & matching their Length in certain circumstance!!!
@CISCOTTE
Now that you are CCNA stay around to help the ones who needs it! 🙂
@CISCOTTE
What SIMS did you see?
Hello team!
Im studing for 100-105.. but i need some valid exam questions.. and these dump sites sells pdf for 50 – 100 $ also i dont know if the product they offer will include new questions as updated by Cisco.
Can someone send me a 274q dump pdf??
mail: salamina2014 (@) gmail . com
Thanx and good luck with your exam!! 🙂
@PL413r
NO DOUBT PL!!! According my availability I will do the BEST I can!!!
In coming days/weeks, till I get a new JOB I will practice as much I can on the PKT ( As much LABs I can!!! )getting ready for INTERVIEW!!! Hopping that my NEXT CISCO Cert will be payee by my BOSS!!! lol!!
That is the most TRICKY park!!!
PS: If you wants to talk you have to tell me about what is the best time for you!? (-2h )
@CISCOTTE
Could you please tell us what SIMS you had? Just the regular DHCP NAT and ACL? Where they easy?
@Datboi
SORRY D!!! NOW, FOR 20mn I TRY TO POST STUFF TO U & THE SITE DOEN’T LET ME DO IT!!!
THEY KEEP TELLING ME I DUPLICATE!!!! NOT_NOT TRUE!!!!
WILL AGAIN SOON!!!!!
THIS THE LINE THEY GIVE ME EACH I DO:
” Duplicate comment detected; it looks as though you’ve already said that! ”
THAT IS NOT TRUE!!!! THEY DIDN’T LET ME POST IT????????????
The latest dumps don’t seem to have the questions that I had in my test on Friday. Which makes me wonder how current they are. What is the latest dump for 100- 105 anyone I could really do with this to help me out. I feel so deflated at failing, I’ve had my head in these books for near on 5 months!
What was the definitive answer to the CEF question?
@9Tut.net
DON’T GET IT!!! WHAT IS the PROBLEM?????
CAN’T POST WHAT I WANTS?? I PAID 4IT!!!!!!
WHY DO I GET THESE LINEs???????????????????????????????????????????
1) ” Duplicate comment detected; it looks as though you’ve already said that! ”
2) ” You are posting comments too quickly. Slow down.”
@Peter this site is accurate, the $9 is worth it and has 7/10 questions on the exam. Reading and study should help with the remaining 3, if you get into a study block and not sure what to study next then best thing to do is take the exam. You’ll get a % at the end in the 5 category’s and you’ll know where to concentrate at for the next time you take it if you fail.
Thanks Anon. I scored 825 out of 832.
Network Fundamentals 67%
Lan Switching Funda 69%
Routing 100% ( I was like wow!)
Infrastructure Services 67%
Infrascture Maintenance 65%
I definitely feel like I’ve hit a study block. I been over everything so much now, I can’t cram anymore in, and they throw these little curve balls like Teredo and ISATAP Tunnelling!! Hey Mr Lammle, where is this in your damn books!! 🙂
DatBoi & U2!!!!
The 274q are still 100% GOOD_GO + Drag and Drop to MATCH CABLEs Type and their Length!
https://drive.google.com/open?id=0B9XjqInn_2WiWFpNeG83M3AtdDg
password is pineapple.
ALSO, a good practice is to PAGE all the PREVIEW comment in order to find SOME ANSWER to YOUR QUESTIONS!!
DatBoi
IN FACT I THING & KNOW WHY I WAS NOT ABLE TO POST:
THEY WERE BLOCKING ME in giving you some Link that people PAY for IT!!!
SO, regarding the SIM must KNOW: DHCP,ACL, NAT, RIPv2 & SECURITY (Troubleshooting)
PS: PAGE PREVIEW comments in order to find SOME ANSWER to YOUR QUESTIONS!!
@Peter I got same score as you but 75/85/80/75/50 so I have been studying IM.
So you are good and set so when you take it again you’ll pass for sure. Most my study went into switching since where I work has way more switches then routers to deal with.
Passed with 930+,few new questions and very confusing, I do not remember the options, but there was a question in regarding CEF (What makes CEF disable or something like that), 6to4 tunnel, Reserved VLAN, a question related to Ethernet Frame,
No Drag and Drop, No fill in the blanks.
LABs were related to DHCP, ACL, and Security
I finished the test 20 min earlier.
Thank you everyone for sharing your experiences, it really helps a lot.
Special thanks to Dave, CISCOTTE and PL413r. You guys are awesome.
guys what do you think about the Passleader dump.could it be sufficient material to make me pass the exam because im considering writing on a friday
Keep studying guys, be prepared
The exam is trickyyy cisco takes peoples money.
@shadows
Congratulations man,
I’m glad I could help you somehow!
Welcome to CISCO certified world!
@swiss
Dumps are not enough, you need to understand what you are doing otherwise you are not gonna be able to pass the SIMs.
These SIMS were 19% of the test.
@CISCOTTE
Practice on GNS3…there you have full version of CISCO IOS.
That´s what i will use for icnd2
UTC -3 here.
@shadows
CONGRAT s!!!! and YES Special thanks to PL413r. & Dave!!!!
LETS KEEP UP!!!!
@PL413r
YOU SAID:
“Practice on GNS3…there you have full version of CISCO IOS. ”
I have been told that GNS3 is sucking the power on your LAPTOP!!????? SLOW DOWN the System
I have GNS3 & BOSON …WILL TRY!!! Thanks PL!!!
Hi Guys,
http://pass4surekey.com/exam/100-101.html, is this a valid link to buy the dumps, or if anyone is kind enough to pass me Dave’s dumps and SIM, I have my exam this coming 9th of December I seriously need you guys help.
Download actual and latest Cisco Interconnecting dumps from https://www.dumps4download.us/free-100-105/cisco-question-answers.html
thanks Smith looking into it , anyone else have any suggestion
Passed 200-125 today 986/1000 in EU region. Got the study materials from the comments and studied about two weeks. There are 67 questions and same sims and drag and drops as always. I used 182q and sims vce. There is a question about mdi connection and primary router fails i forgot the question.
pay hip .com/b /Cx9g
(Remove the space)
Goodluck to all!
Hi all I will be taking ICND1v3 100-105 on 15 december 2016 can someone advise which dump I can use which is more to the passing.
Hi
EIGRP and OSPF are not in ICND 1 new exam right?
Answer Please – No they are not.
@PL413r & @CISCOTTE
Thanks for the SIMs! Well done on passing the exam. I’m hoping to take within a month, so fingers crossed with this site then i’ll have a good chance!! The Wendell book has a massive section on IPv6 – apart from the IPv4-IPv6 tunnelling Q’s – are you guys aware of this being an area that they test on? If so, have you got any brain dumps on these?
Cheers
@Tony
Hi T! In fact I thing CISCO is testing US on HOW MUCH are WE keeping UP with the transition from V2 >V3 TUFF!!
I MIGHT BE WRONG???
@Tony Dean
Your best bet is to Study up on 6to4, to soon for any reliable dumps to have those questions ready, as for 9tut, they have enough to help pass but Cisco has enough as well to make you swing and fail.
Hi PL413r & CISCOTTE
Could you please share the sim with me, and the latest dump. I have my exam on the 9th of December
@Evolution & U2
GUYS ALL THE LINK YOU NEED ARE ALREADY SHARED/POSTED BETWEEN Page 1 & 12
The file is 274q & the SIM is the DHCP that include NAT, ACL, RIPv2 & SECURITY
ALL ARE ALREADY POSTED!! GOOD LUCK!!!
@Tony Dean
You should STUDY all the subjects and those new questions that were posted on page 11 by this guy Review. So if you have to answer any questions on those subjects you will be fine.
Also do a lot a SIMs and understand how to troubleshoot them or you will not pass, cause my labs were 19% of the 63 questions(SIMs will take good amount of your time). Also these labs take time so be prepared to take normal multiple choice questions in less than 2 minutes so you have enough time for the SIMs.
Also read our old posts where we posted recent new questions we’ve had.
@Tony Dean
labs = SIMs!
Yes @Evolution the link you mention pass4surekey.com is valid, I & my friend passed the 200-125 exam
@Lisa
Thanks for confirming
274Q is on pg6
For everyone wanting to know what to study refer to…
https://learningnetwork.cisco.com/community/certifications/ccna/icnd1/exam-topics
I made the mistake not going there and going through each and making sure I know what to study. Going through that and the questions on this site will ensure you pass.
Don’t rely on dumps the cert wont get you the job, the answers you give during interview will.
I’m amazed some of you guys can study only 3 weeks and pass the exam. There is just too much content to know and understand well enough to do it in such a short time. Congratz on passing though.
@Peter
When I took Cisco Class there was a student who had photographic memory, spent 1 week reading the book for CCNA Security and passed.
There are people who can do it but for the majority we need a bit more time.
Hey guys. Just took my exam and passed with an 883. First of all I wanna give a shoutout to CISCOTTE for keeping this discussion board so alive and constantly moving. Also to PL413r for your knowledge and activity level on here as well.
As for the test I found it to be extremely easy if you know the material. I read Odom’s book cover to cover and lurked on this board for the past 2 months reading comments. I did a lot of packet tracer sims and used an old 100-101 dump. Between the comments on here, the passleader dumps and the old 100-101 dump that I used there were a TON of questions that were immediately familiar to me. I passed the test with over an hour to spare.
I got the security sim thats on this site with the 1 router and 1 switch. My biggest roadblock was probably the NTP/ACL sim that they gave me. I devoted no time to studying NTP and thats the sim that I got (go figure). VERY FEW IPv6 questions thankfully.
If you have the time to study you should definitely be going back through every page on this comment section as quite a few questions came from here. If anyone has any questions I’d be glad to help and continue to check this board daily.
Congratz Pekz, I have mine booked again for next week. Hopefully second time around i’ll come good.
Can you remember any questions that came up, that you thought jeez….never came across that, or didn’t give that bit too much thought? Was there anything on licencing?
@Anon thanks for your support and encouragement BTW!
@Peter
Didn’t get any questions on licensing. I was really trying hard to bank some of the questions in my head to share with you guys, but I was just so focused on passing 🙁
One that I haven’t seen here was:
What occurs when an Ethernet cable is too long?
A) Giants
B) Runts
C) late collisions
D) ???
I’ll try and remember some more. If anyone has any questions they’re curious about it’d probably jog my memory if you asked about it 🙂
@Pekz
C – Late Collisions I think…
Yeah that’s what I answered 🙂
@Pekz @PL413r and all,
Did you come across any OSPF questions in the exam? I’m seeing quite a lot of them in the 274q dump so I’m a bit worried. Thanks a lot!!
Pass your exam on first attempt. Money back Guarantee.
These are valid exam questions. Visit below page and download dumps instant:
remov-asteriks from below link
icnd-dumps.blogspo*t.co*m
Nate, I saw RIP in the 274q dump as well but those two are out of scope for this exam:
https://learningcontent.cisco.com/cln_storage/text/cln/marketing/exam-topics/100-105-icnd1-v3.pdf
Passed with 895, just go through this 274q and study the CBT nuggets at a fast playback speed. Plus read all the questions in this forum.
I am officially an Associate.. since I already did ICDN2 the old version before it expired.
I would like to thank everyone on this forum. Off to CCNA security as I rack the initials up.
They are what get your foot in the front door.. how you keep yourself there is purely down to hard work.
The link to free CBT tutorials is the one below.
http: //www.freetutorial. pw/programacion-tutoriales/8206-cbtnuggets-cisco-ccent-ccna-icnd1-100-105 .html
Good luck all.
@Nate
The only thing I saw that had OSPF in it was the question about which routing protocol has a default administrative distance of 90.
I’ve googled it but can’t seem to find it anywhere.
What are the sims on the new V3 exam? are they the same as before (the Security & Show Config Sims) or has another been added? Are the sims always the same?
TIA.
Tried looking for Dave ICND1 SIMS/Dump but his links no longer work… are they anywhere else?