Share your ICND1 v3.0 Experience

@RouterPowder – yeah shame i think i must have just missed out on those.

I gave my exam today and passed with 930/1000. 50% of the questions are from the dumps. Coming to the simulations, same questions shared from the @Dave, but the configurations are different which lead us to choose a different answer. So, be careful with the dumps questions which appear on the exam, just check with the configurations and answers while proceeding further.

@Pekz

CONGRAT!!!! and thanks to you for the ” I wanna give a shoutout to CISCOTTE & PL413r ”

Helping one to the other is what life should be about and after all:

” WHAT GOES AROUND COME AROUND!! ”

Thanks again!!!!

Took the test and failed CCENT. The second simulated did me in. I studied all the ICND1 100-105 Sims intensely but was not expecting DHCP Sim from CCNA 200-120 it was all physiological. Any support would be greatly appreciated. I also experienced a lot of IPv6 question outside the dumps. Also Nat & acl questions.

Can someone confirm the sims on ICND1 100-105 Sims?

Hi guys, recently joined the forum and from what i have gathered is that the information shared by Dave is quiet good. Tried going back to old posts and luckily found Dave’s posts but can’t be able to open the links. Can anyone one be kind and share the dumps with me.
Thanx in advance.

@sai, please share your dumps used for the icnd1 100-105exam to {email not allowed} . I will be taking the exam on December 5th 2016.

@Pekz
Congratulations , glad I could help you somehow!

@Nate
The only thing you have to worry about OSPF in ICND1 is administrative distance and maybe know that its a link state protocol. That will be no OSPF SIMs. In ICND1 exam SIMs you can have only RIPv1v2 etc, so know it well to pass.

@All
I wont be here to often, but will read here and try helping as much as I can.

@Anon
The SIMs can be DHCP, NAT, SECURITY, RIP, ACL, VLAN and NTP.
I had Security, DHCP mixed with ACL and NTP.
PS: read our older posts and you can find out what we had exactly.
SIMs were the hardest I had on the exam! so study and understand these subjects well.

@pl413 and @CISCOTTE..r u guys preparing for icnd2? which materials are you using?? plz share …thanks..

@krixs
Yes I am in process of collecting materials. I am planning to use old cbtnuggets (since I am short on money) for now later I will buy a local CCIE teacher training videos that I used for ICND1.

@krixs

NO! If you read my post, you will know that I just got my CCNA…” Long Story! ”

My NEXT SPEP is CISCO SECURITY in February IF EVERYTING GOES the way I’m planning IN it??

JOB will have a lot to do for my forwarding decision!!!!

NOW REMENBER:
” MISSION NOT MEMORIZATION ” & EVERYTHIG PL413r are FOUNDED 100% ADVICE!!!!!

” MISSION NOT MEMORIZATION ” & EVERYTHIG PL413r SAID are FOUNDED 100% ADVICE!!!!!

Thanks PL413r….

@CISCOTTE

Hello, any chance you’re able to share Daves questions regarding the exam, his links are dead.

@RouterPowdwer & U2

THAT INCLUDE EVERYTHING YOU NEED TO KNOW!….TILL CHANGE!!!!!

JUST TESTED/STILL UP!!!

https://www.dropbox.com/s/a5puza67n5cyu6k/ICND_1_PACKAGE.zip?dl=0

Can any one share us Todd Lammle’s CCNA 200-125 text book

can anyone share the latest dumps with me people ? i gave yesterday and failed the exam.There are lots of new questions from CDP,NAT,ACL and all. Can any1 please help ?

questions which came for me :

if a port configured for VLAN 2 receives traffic for Vlan 1 how will the traffic be handled by the port ?

Max how many vlans can a port support ?
1,8,1024,20xx

got 2 SIMS .One was router switch security and another trouble shooting of router

Hi guys… anyone know where find mi certification ccent to download please???

Thanks!!

@CISCOTTE

Thank you so much! If I were to evaluate based on those tests I should be good to go, hopefully I am ready, taking the test today.

@rick

check your cisco account, if not contact cisco

Hi guys,

I’ve studied all the sections in the wendell book and have booked my exam for next week. Just running through the 274Q dump again and i’m not too sure about this question:

QUESTION 130
Identify the four valid IPv6 addresses. (Choose four.)
A. ::
B. ::192:168:0:1
C. 2000::
D. 2001:3452:4952:2837::
E. 2002:c0a8:101::42
F. 2003:dead:beef:4dad:23:46:bb:101

Any thoughts?

Hey Tony,

The question 130’s suggested answer in the VCE Plus 274q sheet is ABEF. However, I am not sure this is correct. When I ran the addresses via a IPv6 address validator, it said that all of them are valid.

If, however, the question was ‘Which of these addresses can be assigned to a host?’, then options A and C may not pass. What do our experts say?

@NI-HAO, you reported two questions:

Q1: If a port configured for VLAN 2 receives traffic for Vlan 1 how will the traffic be handled by the port ?

Answer: If an access port receives a packet with an 802.1Q tag in the header other than the access VLAN value, that port drops the packet without learning its MAC source address

Q2: Max how many VLANs can a port support ?

Was this question actually asked this way? It seems that there are hard-coded limitations in IOS per type of device due to memory limitations (e.g. Nexus switches seem to be able to handle over 4000 VLANs per port).

Passed ICND1 today…. Cant remember questions but I can say study up on how DNS works with Cisco networking and Syslog notifications

9tut is great help but will not get you passed.

@RouterPowdwer

CONGRAT_ CONGRAT RP!!!!!

But what about the Sims!!!!DID U GET DHCP, NAT, ACL, RIPv2 & SECURITY????

https://www.dropbox.com/s/a5puza67n5cyu6k/ICND_1_PACKAGE.zip?dl=0

@CISCOTTE

The one with SwitchA and RouterA and one was combined NAT/ACL with NTP

@Tahoma

That’s what i was thinking – that Q doesn’t really make sense otherwise! Thanks for the response!!

There was another question on CEF . I Do not remb the exact framing :
But it said : If you Enable CEF what gets disabled ?
RIB
ACL logging
IP forwarding
i do not remb all answer options . Any1 who knows this ?

There was another question on CEF . I Do not remb the exact framing :
But it said : If you Enable CEF what gets disabled ?
RIB
ACL logging
IP forwarding

@NI-HAO

The CEF question was mentioned earlier here. If CEF is enabled, fast switching is automatically disabled. This is because there are three types of switching (process switching, fast switching and Cisco Express Switching (CEF) and only one can be active at a time.

@Tony
QUESTION 130
Identify the four valid IPv6 addresses. (Choose four.)
A. ::
B. ::192:168:0:1
C. 2000::
D. 2001:3452:4952:2837::
E. 2002:c0a8:101::42
F. 2003:dead:beef:4dad:23:46:bb:101
Any thoughts?
Answer: Yes…I recomend you reading 9tut ipv6 tutorial, there you will see ipv6 formation. Its to much to explain here!

@PL413r ….Hi PL!!

@Tony

http://ipv6.com/articles/gateways/IPv6-Tunnelling.htm

http://www.slideshare.net/kriz5/cisco-i-pv6labandtechtorialworkshop-v0

I am taking the test tomorrow morning. I have been preparing since August and with all the help here and the Odom book I have high expectations. I will everyone know how it goes.

I am taking the test tomorrow morning. I have been preparing since August and with all the help here. If anyone have any dumps please send to hrdarun.gmail.com

Can any one post 274Q?

@Tony and CISCOTTE
I meant this one
http://www.9tut.com/ipv6-tutorial

Anyone out there that can shine a light on these questions.

1
which one is unique address?
0000000000
111111000
111111111
don’t remember 4th one

2
What happens when Ethernet cable is too long
Giants
Runts
Late collisions
don’t remeber 4th one

3
If you enable CEF what gets disabled.
RIB – what the hell is this
ACL logging –
IP forwarding – what the heck
4th one I don’t remember

4
When you configure router# ip nat pool 10.10.10.1 10.10.10.20 255.255.255.0
nat pool
daymatic nat
nat translation
dhcp pook

5. There was a route question on which route you need. I don’t remember the question.
192.168.0.0/16
192.168.x.0/26
192.168.xx.xx/30

6. one other question was how many IPv4 addresses can be assigned to an interface? I went with one. What kind question is this? Ugh.

7. what is or describe NTP. I don’t remember the question.

I almost pass the exam, off by 1 or 2 questions. Can you help me find the answers?

Thanks,
CiscoTryHard.

@CiscoTryHard
1. 11111000
2.Late C.
3.
4.NAT POOL
5.
6. with subinterfaces it is 4096 due to max vlans being 4096 so 1 should be correct unless they talk about 2ndary IP’s which they dont in ICND1
7.Read ICND1 book on NTP its just a few pages and you’ll know what you need to pass those easily.

@RouterPowder

Thanks chief. I’ll keep searching for answers. Cheers.

Ya, NTP is one of those things you read but overlook. Very small foot print in the book but I had several questions on it in the Exam

@PL413r

Hi PL!!! …I’m always surfing to this site !!! NEVER came across a ” PL ” member!!!

Anyway, thanks! I have to keep up!!! ” IF WE DON’T USE IT WE LOOSE IT!!!! lol!

Does anyone have latest questions dumps for ICND1 100-105? Please share. Thanks.

Hi guys. In one hour i will renew my ccent cert by taking icnd1. I had it for 4 years and now i want to get the ccna at least. I will come back with info.

@CISCOTTE

In your exam you said you got a drag and drop for cable lenghts etc…. Would learning the info on this site be useful?

https://kb.wisc.edu/ns/page.php?id=7829

@CISCOTTE
In your exam you said you got a drag and drop for cable lenghts etc…. Would learning the info on this site be useful?
https://kb.wisc.edu/ns/page.php?id=7829

Or do you remember the Qs?

no drag in the exam men.

@Jedi256
@Alex
Can you post your experience from the ICND1 exam? Thank you.

@CISCOTTE
PL is unique like ipv6 link local lol
@CiscoTryHard
These questions have been previously answered/guessed so please look in olders posts!

@All
Once you take the test, please post your experience here cause it can help some friends to pass as well. Especially those CISCO non sense questions, and keep on studying hard and everyone will pass it!
Listen to CISCOTTE wise words
”WHAT GOES AROUND COMES AROUND!!”

@Exam soon!!

AS FAR I REMEMBER: I had to MATCH TYPE & MEDIA OF IT! FIBER? COPPER? CAT5 ect…..

To tell you the true, I forgot!! For sure it was 1Q. made of 4 Matching – Like the Simlet
1Q. made of 1/4 that must be answers!

REMEMBER YOU MIGHT NOT GET ANY CABLE QUESTIONS!!! TEST ARE DOWNLOADED RANDOMLY!!!

I thing PL413r didn’t have any of it!!!

ALSO SEE:
1. Pl413r
November 23rd, 2016 p.11

WHAT I TRY TO TELL YOU IS THAT: YOUR FOCUS SHOULD BE ON SIMLET!!!

CAUSE: IF YOU MESS UP YOUR TROUBLESHOOTING Questions ” YOU WON’T PASS!!! ” 4SURE!!!

#CISCOTTE

ya, I had no cabling questions on my exam

Passed today 883/1000 . Security and DHCP /nat /Acl lab was there .

NOTHING PERSONEL!!!!lol

IN FACT I THING I’M THE ONLY ONE GOT CABLE QUESTIONS!!?

Plz, let me know is there any simlet questions in ICND1 100-105?

@sky
Congratulations, this is hard working paying off!
@CISCOTTE
You are right, I haven’t got the cable questions!

@seeker
Here they are (starts at page 576)
h t t p : / / w w w . c i s c o b r a i n d u m p . c o m /7-nov-2016-update-200-125-dumps-with-vce-and-pdf-for-free-update-questions.html

@seeker
Here they are (starts at NEW QUESTION 576)
h t t p : / / w w w . c i s c o b r a i n d u m p . c o m /7-nov-2016-update-200-125-dumps-with-vce-and-pdf-for-free-update-questions.html

@seeker
I am sure CISCO changes the running-config so expect simular SIMs NOT the same.
And as always understand the concepts or you risk failing the SIMs.

@sky & U2!!!!

CONGRAT!!!! and after all in the life the ONLY LIMIT is the ” SKY ” lol

SO LET IT BE!!!!!

PS: Thanks ” PL ” for the NEW QUESTIONS!!! USE IT or LOOSE IT!!!! lol

I wanna thank you guys for your help.
I write my CCENT today, I passed.

Thanks a million CISCOTTE, PI413r and all of you, your link, your advices … very very helpful.

Now, The next step is CCNA SECURITY

Dumps Updated on the 7th of December 2016

ICND1 (100-105) = 239Qs and 201Qs
ICND2 (200-105) = 110Qs and 204Qs
Latest Dumps in Both PDF & VCE Format.
Working VCE Player
All LABS TOPOLOGIES for Packet Tracer 6.0.1
All time EMAIL Support for any querry.
You will also get free updates for 60 Days, starting from your contribution date.

If anyone interesting let me know.
FYI – wanninayakegcb at gmail com

hi guys someone can who took the exam can share with us any Q from the exam.

@PL413r,

Did you start studying for ICND2 ?

@LordBoval

CONGRAT_CONGRAT LB!!!! ….NOW LETS KEEP GOING!!! lol

….my CCNA SECURITY Class won’t start before AUGUST 2017!!!! But I will start soon ON MY OWN!!!! But I WILL go over all the Lab from A>Z

PS: IT MYGHT GOOD CAUSE PL413r will READY BY then!!!lol
( IN LIFE EVERITHING HAPEN FOR REASON!) lol_lol!!!

Hi All,

I have been working in networking for 4 years, where can i get the dump Q as I will be booking ICND1 after Christmas. I’ve failed ICND 1 in the past by 15 marks but feel much more confident now.

I passed the Dave question test first time with a couple of mistakes.

Thanks

BGPBOY

****** AS WE SAID REWIND FROM P.1-12 & OVER!!!!!******

@CISCOTTE,

Bro, do you mind sharing why did you select to go for CCNA SECURITY ?? No Plans of going for CCNP Routing & Switching instead ??

Would anyone who has taken the exam please tell me how many subnetting questions they had? I heard on 100-101 it was almost all subnetting, but i am not hearing that about the 100-105. Is that accurate?

@Snek, I had couple of subnetting questions and that’s it. Very straight forward.

Big thank you to all the guys that have posted especially @Dave, @PL413r and @CISCOTTE! I passed with 930. 90% of Qs were either in the Q274 dump or above. Sims were the DHCP, ACL, RIPV2 (the config of the routers was slightly different, so be careful to learn how to use and understand the show commands (sh run, sh ip int brief). The other was the security Qs – again slightly different configs.

I can’t remember many of the new Qs, but one was something like:

Which protocol do switches use to share VLAN information with other Switches?

a. VTP – I answered this
b. STP.
can’t remember the rest of the answers.

I also had a question on NAT Overload (PAT) along the lines:

What does it mean by this config: ip nat inside source list 99 interface Ethernet0 overload

a. Addresses in ACL 99 use the IP address on Eth 0
Sorry, but can’t remember the other choices

If i can remember any more i will let you know.

@Snek – only a couple of subnetting Qs, just remember the magic number subnetting table and you will be fine: http : / / w w w . netsrv-consulting. com/blog/subnetting-using-the-magic-number/

Hope this helps and see you in the ICND2 board!!

@shadow & U2

WHY I CHOOSE SECURITY?? Good question and is simple as that:
Because my background and FOR EXAMPLE: If you wants to get a J.O.B with the DOD.gov. all positions are requiring a CCNA-Security which is a ” DOD8570 compliance “.

THEN:
You will become a ” CISCO PRO ” and will be able to move forward in that PRO INGINEER direction & title recognition!!!

Also depend what are your ” GOAL ” where you SEE YOURSELF in 5 years from NOW!!!
AND YOU MUST KNOW THAT!!!!!

What is DoD 8570?
https://news.clearancejobs.com/2015/04/23/dod-8570/
Cisco Certified Network Associate (CCNA)

GOOD LUCK!!!!lol

@Tony Dean

CONGRAT_CONGRAT TD!!!! you have OPEN the DOOR!!! SO, LETS MOVE ON!!!!lol

@Shadows

You can go CCNA Security right after CCENT Cert you don’t need to get Routing and Switching CCNA first… just a side note….

I myself am going Security after getting Routing and Switching, that security cert will open a ton of doors whether its Government or not.

Honestly Im getting majority of the CCNA Certs, Routing and Switching, Security, Wifi

@RouterPowder

*****************You do not want to put the cart before the oxen*********************

DO YOU???

@CISCOTTE

Depends, If your location already has enough oxen’s and only needs you to build a Cart 😉

Just took the test and failed.
A lot of the questions were in the 274q, but a LOT. I got 63 questions in the test (I thought they were 45), but you really need to study and understand the material to pass. Some topics were NTP, a lot of NAT, 2 sims, OSPF, IP route a lot of vlans.
Subnetting questions were very basic.
I got like 4 questions of Administrative distance. (Ex. They give you the number and the answers are EIGRP, OSPF, etc)

Q: First step of DHCP when you have a DHCP Server and DHCP client?
Q: What is Ping? (You need to know the specific definition because all the answers are very similar.
Q What ip ping all the routers in a LAN?
127.0.0.1
239.something.something.something i dont remember the answers
Q: What is the correct command to NAT?
What is default command is in the interface?
a. shutdown
b.don’t remember the other answers. I selected answer a.
My last questions was something about vlans?
if they were 802.3x, 802.5G, something like that.

@RouterPower

**********IT’S CUTE BUT I THING YOU JUST LOST ” Power ON YOUR Router “*************lol

YOU SAID:
RouterPowder
December 8th, 2016

@CISCOTTE
Depends, If your location already has enough oxen’s and only needs you to build a Cart

I SAID:

********IT’S CUTE BUT I THING YOU JUST LOST ” Power ON YOUR Router “*************lol

@Sky

SORRY!! BUT! The way you SAID you FAILED, it’s look like you ” GOT LOST IN PARADISE! ”

WHAT I TRY TO SAY:

1) DON’T WORRY IS NOT THE WAY WE FAILED BUT THE WE COME BACK UP!!!! AND YOU WILL!!

2) YOU CAN’T LEARN CISCO ON THE ” FLY ” BELIEVE ” WE MUST TAKE BABY STEP & REVIEW TIME AFTER TIME – Sometimes I feel I know NOTHING!!! BELIEVE ME Y/N!!!

3) IT’S LOOK LIKE THEY HAVE CHANGE THE SIMLet!!? YOU SAID, OSPF and EIGRP????

4) THE WAY WORK THIS FORUM IS BY SHARING YOUR EXPERIENCE OTHERWISE THERE IS NO POINT TO BE ON IT!!!! AND YOU DID!!!!! THANK YOU!!!

@Sky

Yes you do need to know and understand, but now you know were to focus on, next time you will pass. Don’t worry about failing a exam, it will happen as you continue forward its just another bump in the road…

@CISCOTTE

My routers our self automated devices who suckle power from nearby lines.

@SKY
I am sorry you did not pass!
Just took the test and failed.
A lot of the questions were in the 274q, but a LOT. I got 63 questions in the test (I thought they were 45), but you really need to study and understand the material to pass. Some topics were NTP, a lot of NAT, 2 sims, OSPF, IP route a lot of vlans.
Subnetting questions were very basic.
I got like 4 questions of Administrative distance. (Ex. They give you the number and the answers are EIGRP, OSPF, etc)
Q: First step of DHCP when you have a DHCP Server and DHCP client?
Answer:
The steps are D.O.R.A (Discover,Offer,Request,Aknowlegment)

Q: What is Ping? (You need to know the specific definition because all the answers are very similar.)
Answer:
This is not about seconds…you need to know that the “host sends a ping request and destination sends a echo reply”…many wrong questions were mixing this

Q What ip ping all the routers in a LAN? (INCOMPLETE)
127.0.0.1
239.something.something.something i dont remember the answers
Answer: It depends, cause IPV6 there is a multicast group…I think the right questions/answers are below
Q Which destination IP address can a host use to send one message to multiple devices across different subnets? (my guess)
A. 172.20.1.0
B. 127.0.0.1
C. 192.168.0.119
D. 239.255.0.1 X

Q: What is the correct command to NAT? (INCOMPLETE)
Q Which NTP command configures the local device as an NTP reference clock source? (my guess)
A. ntp peer
B. ntp broadcast
C. ntp master X
D. ntp server

Q What is default command is in the interface? (INCOMPLETE)
a. shutdown
b.don’t remember the other answers. I selected answer a.
My last questions was something about vlans?
Q Which option is the default switchport port-security violation mode? (my guess, could also be default switches interfaces “are no shutdown” but router are “shutdown”)
A. shutdown X
B. protect
C. shutdown vlan
D. restrict

Q if they were 802.3x, 802.5G, something like that.(INCOMPLETE)
Which method does a connected trunk port use to tag VLAN traffic? (my guess)
A. IEEE 802 1w
B. IEEE 802 1D
C. IEEE 802 1Q X
D. IEEE 802 1p

Many if not all of these questions are in that 274Q.
Like you said man, you need to understand all subjects now in order to pass (specially to complete those SIMs).
Study hard, test/time yourself, do SIMs, review new questions posted here and you will easily pass it next time!

@Tony Dean what can i study to ensure a pass??
@Pl413r what tips can you give for the ICND1 exam??
@CISCOTTE can you email any dumps here philani.hlatshwayo.ph@-gmail_dot_com)

I took test the last week and the biggest surprise I had, after all my practice to get it down to a science (and write down my subnetting cheat sheet as soon as I get my laminated paper) is that I had only ONE question that involved subnetting.

I recognized over half of the questions from various dumps so you can memorize and get half of the test off the bat, its that other half that was the hard part, because you had to understand the fundamentals..

I passed with 871/1000 (832 Passing) On to the ICND2.

how many questions are on ICND1? I heard 45-55 and 110 min.

Thank you for the support. I will retake it back again.
Also, another question was something about computer connecting to radio signals and the answers were:
a. access point
b. wireless controllers
c. don’t remember
I think it the answer was access point

@Sky

Correct, Access Point

@philphil

EVERYTHING YOU NEED ARE From PL413r & I on P.12 & P.13 and 274q P.6

PS: SIM ARE THE KEY TO PASS!!!

what are your thoughts on this question

Refer to the exhibit. Which statement describes the effect of this configuration?
Router#configure terminal
Router(config)#vlan 10
Router(config-vlan)#do show vlan

A. The VLAN 10 VTP configuration is displayed.
B. VLAN 10 spanning-tree output is displayed.
C. The VLAN 10 configuration is saved when the router exits VLAN configuration mode.
D. VLAN 10 is added to the VLAN database.

Answer: C

Everyone here thinks its D – the 274q says D – the v3.0 premium 9tut site says its C – Im thinking it may actually be C

@noes

This answer is D

@noes
About:
Refer to the exhibit. Which statement describes the effect of this configuration?
Router#configure terminal
Router(config)#vlan 10 (correct command on routers is Router(config)#int vlan 10)
Router(config-vlan)#do show vlan
A. The VLAN 10 VTP configuration is displayed.
B. VLAN 10 spanning-tree output is displayed.
C. The VLAN 10 configuration is saved when the router exits VLAN configuration mode.
D. VLAN 10 is added to the VLAN database. X

Explanation: when you run that command it creates a vlan 10 right after hitting enter, C is not correct because of that! (you can/should try it yourself on packet tracer)

@philphil
Study hard,know your stuff, test/time yourself, do SIMs, review new questions posted here and you will easily pass it next time!

@NetworkNinja
how many questions are on ICND1? I heard 45-55 and 110 min.
Answer: I had 63 all together…time it depends if you are in a english speaking country or not in a english speaking coutry(in this case you get more time)!