Share your ICND1 v3.0 Experience

hi all,
is there any possibility to get these Dumps for free?

Taking the test on Thursday, any recommendations or tips to prepare for the SIMs? I read the DHCP one has different configurations. What about Security or RIPv2? Are those still the same? I have been studying the questions from dumps and understanding the concepts.

@Onn

You have configured the host computers on a campus LAN to receive their DHCP addresses form the local router to be able to browse their corporate site.

Which statement about the network environment is true?
A. It supports a DNS server for use by DHCP clients.
B. Two host computers may be assigned the same IP address.
C. The DNS server must be configured manually on each host.
D. The domain name must be configured locally on each host computer.

The answer is D.

Blair, fk you, you came here to advertise for stupied links, get the hell out of here,

Passed today! Just believe in 9tut.

Rabbit
what did you use to pass

Ash
ODOM book and 9tut.

http://www.filedropper.com/100-105updatedasofmarch2017

for the new people it’s very valid free but do yourself a favor and eat Odem’s cisco press, lab and study concepts…. thank Rob and Answers

Hi I have exam next wednesday ICND1 i have failed routing and switching 150 first time.
So i chose to do icnd 1 and focus on CCENT and then take the security pathway no point wasting and losing another $300. Can someone tell me what exams questions come up what 9tut dumps and what sims is it the same as 200-125 Eigrp, Acl, Rip v2 etc? drag and drops please guys be as broad and open as you can your advice will change my fate<3

It would be great if all possible simulators were made available under the “LabSim” tab for ICND1 100-105 just like the CCNA 200-125 put their 11 possible simulators under their “CCNA Lab Sim” tab.
Please help in explaining where to find all of the possible simulators that could be on the test. Thanks for your help.

practice questions on http://www.ciscovce.com

Do I have to pay to see Questions and answers?

and how many questions are on this site for ICND1 ?

Thanks

I have exam on Wednesday any advice for ICND1 please guys let me know

Guys please post link on valid dumps thanks. Im planning to take friday

I’m taking ICND1 on Tuesday !! Any suggestions?

3. After you configure a default route to the Internet on a router, the route is missing from
the routing table. Which option describes a possible reason for the problem?

A. The next-hop address is unreachable.
B. The default route was configured on a passive interface.
C. Dynamic routing is disabled.
D. Cisco Discovery Protocol is disabled on the interface used to reach the next hop

which option is match A or c

Thanks Ji Metz

Hi I have exam tomorrow for icnd1 what dumps can I use and please share the whaeions please guys help me out failed once can’t again

Default NTP ? Default ntp 8 . Any body take exam this week? Plz share . I am taking this weekend

Please where can i get discounted vouchers outside US and canada

could share question who take recently exam ?

Hi guys, just passed ICND01 with 9xx.

Questiona are almost this same like in 5xxq dump (pay attention for errors in this dump!)

Got 1 new question (sorry i don’t remember now ;()

1 security sim
1 dhcp sim
1 ACL sim

Congrats ED. What errors are you referring to? Please assist.

congrats Ed what is the 5xxq mean planning to take mine next Friday

Congrats ED what did you use as a study guide?

GL @AIr

@YAS – David Bombal Udemy, Chris Bryant Udemy, Odom book, a loot of labs

dear,

Hi guys, just passed ICND01 exam with 860!!

thanks you for your comment, your´s url help to me to pass this exam

bye

suck the dog

Any ideas on the new DHCP Sim configuration? Are the answers still the same? Questions seem to be the same but the configurations are different.

Does anyone know where I can get the latest CBT nuggets for ICND 1 other than cbtnuggets.com 🙂

@ low low
You have to pay 84 per month . New user one week free . You can download in free week then unscribe .

Can confirm John is right

Guys could you share new questions?

/hi Guys today 21/04/17 I sat my exam and I got 6**/100. I failed. I cannot describe the feeling I wont say i worked my hardest but I memorised everything. Its crazy to think Other people are passing with the dumps but why i always get 60% different questions.

Today I got DHCP sim exact same answers as the DHCP on 9tut I also got a sim which i didnt even revise for it was a router sim I think. Line vty, Password, Ciscouser etc. I done well on DHCP but this other sim i failed miserably. I had no drag and drops I had few on subnets. I cant remember the questions word by word by they were like below so if you know what they are or have memorised share on the group and I will tell you if it was them.

on 9tut i memorised all the new CCNav3 questions and also the 125 questions.

Questions in my exam “not word for word” but for you to get a feel of what it was I had so maybe you might come across them:-

1). 30 hosts, 40 hosts, 50 host choose the correct subnets e.g 255.255.255.192

2). what is the last part of network mask
*Prefix
*metric
*subnet mask
*network ??? cant remember

3). a lot of ipv6

4). alot of infrastructure questions

@OSCAR
Did you got any of this question?
What disables CEF?
Which command can you enter to verify that a 128-bit address is live and responding?
What is true about ipv6 unique local addresses?
What is default NTP ?

So sorry for the confusion i didnt get DHCP sim it was ripv2 Sim!

Hotspot Question – RIPv2 Troubleshooting II

Users complain that they are unable to reach internet sites. You are troubleshooting internet

connectivity problem at main office. Which statement correctly identifies the problem on Router R1?

A. Interesting traffic for NAT ACL is incorrectly configured.

B. NAT configurations on the interfaces are incorrectly configured.

C. NAT translation statement incorrectly configured.

D. Only static NAT translation configured for the server, missing Dynamic NAT or Dynamic NAT overloading for

internal networks.

Answer: B

NEW QUESTION 280

……

NEW QUESTION 281

Hotspot Question – RIPv2 Troubleshooting II

Examine the DHCP configuration between R2 and R3; R2 is configured as the DHCP server and

R3 as the client. What is the reason R3 is not receiving the IP address via DHCP?

A. On R2. The network statement In the DHCP pool configuration is incorrectly configured.

B. On R3. DHCP is not enabled on the interface that is connected to R2.

C. On R2, the interface that is connected to R3 is in shutdown condition.

D. On R3, the interface that is connected to R2 is in shutdown condition.

Answer: B

Failed yesterday with a 813 score , so disappointing ..any ideas on what I should do , I haven’t yet registered for this site yet , I would like to book again next week , do you guys have any dump material to share ?

Lowlow – use torrent sites to download CBT nuggets

I am taking exam tomorrow. Any body get new questions?

i’m taking the exam on Wednesday 26/04. Any suggestions? i have gone through all quizes and exams on 9tut and understand most of the answers, passed most of the quizes.

Pass icnd1 exam first time got 9**. Don’t worry every question cover here. Same dhcp and security sim but configuration different. Thank 9tut n every one

@Sam. Congrats. Are the responses the same for the SIms?

Yes sim is same dhcp and security but configuration n questions difference? Like dhcp enable in r3 router. Secret password in security sim. Beware answer is different.

any ipv6 questions?

Yes IPv6 unique local question.

thank you!

Passed exam first time got 895. 2 sims, DHCP and RIP. Topology and questions the same but answers slightly different. Some IPv6 questions and quite a few NAT. 54 qs.

@Anonymous please tell me where can I get the 346Q dumps ?

Hi Mates

I am taking my 100-105 this Sat 29/04.. Not confident i am gana pass but i would like to give it ago. I need some more questions about RIPv2 .

Passed exam. New question, what is exec-timeout 30 ans: disconnect users idle for 30 minutes.
DHCP has different configuration too. 95% of the questions are here.

Dont spam- What sim did you have??

I passed 200-125 today , 266q is 100%valid with Acl lab , ospf sim

@DA7I, dhcp and security which is exactly the same configuration but more option choices.
Thanks to the community.

thanks dont spam 🙂

@DA7I Work yourself through the configuration. Do not memorize the SIMS. Memorize the other multiple choices though.

Can anybody tell me if there’s any new questions please? I don’t want to fail my third time the SIMS Worry me..and don’t spam what do you mean don’t memorize the SIMS..like the answers? I really want to know..

I don’t want to be hit with any new questions an also for the question where you have to access both switch and router for full points what show commands do you need to use show run? To figure out the answer? And what are the answers for the new SIMS and other choices? I am planning on booking May 7th I cannot afford to fail again the old dumps misguided me to fail..

@Vagabond, all the new questions are in the comments, just scroll through. I also posted a new question that I got. The DHCP SIM has different answers to what is posted here. The command to use show running-configure mostly and show interfaces. The Security SIM is exactly the same.

Please go through the comments here. All questions are posted but if you know the content it will help.

Since I failed 2 times already…I have been gathering all the new questions and everything with the correct answer over a period of time! I am just wondering what the Correct answers for the DHCP SIM are if the ones on 9 tut are wrong… I understand You need to use the show commands like Show run, show ip int, show ip route etc, but i want to ensure I pass because the 3rd failure I heard you have to wait a few months to take it again…So I cannot fear failure I have high hopes I can pass..

Since I failed 2 times already…I have been gathering all the new questions and everything with the correct answer over a period of time! I am just wondering what the Correct answers for the DHCP SIM are if the ones on 9 tut are wrong… I understand You need to use the show commands like Show run, show ip int, show ip route etc, but i want to ensure I pass because the 3rd failure I heard you have to wait a few months to take it again…So I cannot fear failure I have high hopes I can pass..

i’m preparing from this

https://anon.click/dilih80

I will update you when I finish the exam

Yes please update me I would really appreciate it!

commenting in 9tut disabled.

@Vagabond, The DHCP SIM is new with new configuration; I have not seen any posting of it as yet. If you understand the answers for the present DHCP SIM then you should be able to work yourself through. For example, in one of the questions DHCP is installed on R3 so the answer cannot be DHCP is not installed.

hi @Don’t spam,
What is you answer to this question? given that the IP NAT INSIDE AND OUTSIDE is correctly configured

Users complain that they are unable to reach internet sites. You are troubleshooting internet connectivity problem at main office. Which statement correctly identifies the problem on Router R1?

@ Jazz, as I remember the question, these were the options,
A. Interesting traffic for NAT ACL is incorrectly configured.
B. NAT configurations on the interfaces are incorrectly configured
C. NAT translation statement incorrectly configured.
D. Only static NAT translation configured for the server, missing Dynamic NAT or Dynamic NAT overloading for internal networks.

I chose D but I am not sure it is correct.

@Don’t Spam I think you are correct

guys y ccna 200-125 comment section disabled?? pls tell me guyss

security sim contains different config (etc. encryption) but the questions are same so be careful… im not sure if I answered them correctly.

This might be useful for you guys:

The question was:
R1 router clock is synchronized with ISP router R2 is supposed to receive NTP updates from R1. But you observe that R2 clock is not synchronized with R1. What is the reason R2 is not receiving NTP updates from R1?
I did Show Running-Config on R2 and R1.
The testdump I have said “IP address that is used in the NTP configuration on R2 is incorrect” but I didn’t find any NTP entry so I put “The NTP server command not configured on R2 router” _ dont know if this means Cisco has different variations of the Sim or not
Part2 of the sim:
Why applications that are installed on PC’s in R2 LAN network 10.100.20.0/24 are unable to communicate with server1?
Answer: A standard ACL statement that is configured on R2 is blocking the traffic sourced from Server1 network.
Part 3:
Users complain that they are unable to reach internet sites. You are troubleshooting internet connectivity problem at main office. Which statement correctly identifies the problem on Router R1?
Answer: NAT configurations on the interfaces are incorrectly configured
Park 4:
Examine the DHCP configuration between R2 and R3; R2 is configured as the DHCP server and R3 as the client. What is the reason R3 is not receiving the IP address via DHCP?
Answer: DHCP is not enabled on the interface that is connected to R2.

New questions:

1-Which feature automatically disables CEF when it is enabled?
a) RIB

b) ACL logging
c) multicast
d) IP redirects

2-Which NAT term is defined as a group of addresses avilable for NAT use?
a)one-way nat
b)static nat
c)dynamic nat
d)nat pool

3-which statement about NTP is true?
a)each device is enabled as server by default
b)the default authentication key number is 1
c)the default stratum number is 5
d)the default source of an ntp message is the interface connected to the next-hop for server peer address

4-which port-security feature allows a swich to learn MAC addresses dynamically and add them to the running config?
A- Sticky ( but not sure)
B-
C-
D-

5-which statment about dhcp address pools is true?
a) the domain name of the dhcp pool is specifed in the global configuration of the router ( the best choose)
b)
c)
d)

6-which information is used to install the best route to a destination in IP routing table?
a)the tunnel ID
b)the interface number
c)the prefix length
d)the autonoums system

Thanks for that Dont SPAM and 29.04…I still want to look more in depth in it Thanks! I am practicing packet tracer and figuring out what could the outcome could look like! Still seems tricky I hope to pass! They sure are changing up things quiet a bit in the SIMS..I want to keep posted!

and KK guy are those really icnd1 questions seems unclear..not so sure..

i remember question 3 on my previous exam (which i failed) so they might be new questions

I would need some help please and thanks 29.04.. they seem to be adding a lot more things..

Basically in my case liteally 100% of questions (without sims) were located in link i have provided above

Oh really then it must be new questions…I cannot take this test without knowing the answers..My brother is relying on me to pass..so the pressure is real…I need to find the right answers..

I do have a word document myself with all of that…but now I am just adding all these new questions the sims are changing and more questions are being added…

do you have program called visual cert exam ?

No I dont but I have VCE the older version but it works… I just want to know the correct answers for the sims and new questions because its going to be my third time taking the exam soon..

Examine the DHCP configuration between R2 and R3; R2 is configured as the DHCP server and R3 as the client. What is the reason R3 is not receiving the IP address via DHCP?

A. On R2. The network statement In the DHCP pool configuration is incorrectly configured.
B. On R3. DHCP is not enabled on the interface that is connected to R2.
C. On R2, the interface that is connected to R3 is in shutdown condition.
D. On R3, the interface that is connected to R2 is in shutdown condition.

SO B is not correct because no DHCP…?

R1 router clock is synchronized with ISP router R2 is supposed to receive NTP updates from R1. But you observe that R2 clock is not synchronized with R1.
What is the reason R2 is not receiving NTP updates from R1?

A. The IP address that is used in the NTP configuration on R2 router is incorrect.
B. The NTP server command not configured on R2 router.
C. R2 router Ethernet interface that is connected to R1 is placed in shutdown condition.
D. R1 router Ethernet interface that is connected to R2 is placed in shutdown condition.

you said B ? I need to pick up these points before going in and the new questions… is the part 3 and 4 for sim the correct answers?

i think finding new sims answers might be really hard… i tried that myself…
thing i have posted above is a one of the sims i had today BUT im not 100% sure if the answers are correct…. next one was security sim.. with additional configuration (encryption) but wording banner was still one of the choices as is was been shown in my today’s sim

I heard the security SIM is exactly the same? I have been studying but the new questions I haven’t seen last time made me fail..

so just all multi choice u think u got majority correct and SIMS you were off you think? I dont want to end up failing again..

this quotation was something i have found in the comment section just to help you guys and it also reminded me about what i had today

what are the answers to KK questions then? I need to find out..

ok so security sim:
you have different configuration than the one from this site (slight upgrades like encryption,
but it also says “no service password-encryption before that so i think that eventually deny ability to encrypt further commands- BUT IM NOT 100% sure)

answers are 100% same as here, BUT i dont know if you should select them as you would in here

This is referring to the security test let right …so I need to find the right answers..

How many new questions popped up? I want to at least get majority right even if I end up having some difficulty..

on my todays exam.. none but different dhcp and security
but i had 895 so i think some of them could be wrong.

no new questions? I thought you said question 3 popped up..and I heard sims effects it the most you can check what is weak on the printout for results..

no new questions? I thought you said question 3 popped up..and I heard sims effects it the most you can check what is weak on the printout for results..

i had 2 exams one i failed couple of new questions like something with stratum 5
but on today’s one i have remembered 100% questions from this site and the file

This is going to be my third time taking it the previous brain dumps made me fail like nothing and its a crazy feeling..and thats weird your 2nd time you got nothing new?? I hope they don’t hit me with a lot of new questions…

I just need to figure out the new questions to exam, and ill do anything I can to pass!

go and familiarize yourself with comment pages 15+ they are really useful and this is mainly what i have used… then this magical .word file and a bit of luck i think just believe in yourself

This word file I have has everything! I still worried about this exam because these new questions… and these sims plus my concern about the security part too!

Hello Packets don’t cross?
A) Areas
B) Subnets
ANSWER : B

Which header field is new in IPV6?
A. Hop Limit
B. Flow Label
C. Version
D. Traffic class
ANSWER : A

is this on the exam? I have a few more

there is no much I can help you anymore and that i have read comments and file and this is how i have found new questions… I know how you feel mate, but you need to believe in yourself

I haven’t had anything like this on my exam… send me anything you have and i try to help.