Share your ICND1 v3.0 Experience
The ICND1 100-105 exam has come to replace the old ICND1 100-101 exam. We create the “Share your ICND1 v3.0 Experience” for everyone to share their experience after taking this exam.
Please share with us your experience after taking the ICND1 100-105 exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Passed with 906!!!! Read the Odom book, and studied questions from 9tut Premium. On to INCD2! XD
is there any way to get CCDA details?
Any new changes to the exam?
Failed today with 825. Basically failed by 1 question. Passing score is 832.
2 Sims on my exam, 1 regarding DHCP and the other about security.
Most of the questions are on this site with the exception of maybe 5-7 that I saw before.
I will spend the next week going over these questions and will pass next Monday.
oh, 54 questions
These were on my exam today and aren’t on this site.
1-Which feature automatically disables CEF when it is enabled?
a) RIB
b) ACL logging
c) multicast
d) IP redirects
2-which statement about NTP is true?
a)each device is enabled as server by default
b)the default authentication key number is 1
c)the default stratum number is 5
d)the default source of an ntp message is the interface connected to the next-hop for server peer address
6-which information is used to install the best route to a destination in IP routing table?
a)the tunnel ID
b)the interface number
c)the prefix length
d)the autonoums system
@DRC is there anymore of the new questions you got? So you got those all wrong? These were talked about in previous pages..what did you get wrong..and what changes to the security and dhcp??
@Jerry.. Do you know the answers of the 6 q that you have posted it.
hey guys….passed ICND1, no surprise question, materials on this site covers everything, i used cbtnuggets and this site to study, security & dhcp sims make sure you understand configs as you may see different versions of these sims
@avm you got no new questions?
@vagabond – There were a few questions I got not on the 3 question pages on this site. the above 3 I for sure got.
The show run sim is identical to the one on this site.
The DHCP one is a little different. The one on this site the answer is dhcp is not enabled. But on the sim it is disabled so you need to know how to differentiate.
I will be studying just the questions on here and am sitting again Monday. I’ll pass on Monday.
@DRC everyone seems to be getting dhcp sim and security ? not show run? its different version different answers?
@vagabond no new questions, dhcp sim configuration was different to the one on this site
@avm so the question has the same concept in solving it just different config? I been practicing the packet tracer for all of em..
is the security sim answers still the same?
@vagabond dhcp sim different config hence leading to different answers, pay particular attention to dhcp statement config, acl, ntp, if you are pracitcing with configs you will be fine, security pretty much same
On the May 4th I passed my 100-105 test and sort of bugged out of here since then as my brain needed a break.. My apologies…
For those looking to take the test, study the SIMS, DHCP and Security were on mine. Understand the concept and not the answers located here. Not sure about any of these other brain dumps I see getting posted here, but 9Tut is the way to go. Study whats here, take the quizzies, all of them before rushing off to test. Will you see similar questions, yes, will you see new ones, yes. I dont have that great photographic memory so I’m not the one to ask what the new stuff was.. Some IPV6 to IPV4, just one or 2 I believe, but you see them in here too..
The SIMS are very much the same just a few different answers… I believe on a page prior to this one someone addressed the difference between the SIM here and the test.. Again, understand the things you should be looking for first…
@ 9Tut Admin… is the wirelesstut.com site something that we can log into, i noticed most of the comments were closed… I’ll be preparing for that next. What used to be IUWNE 640-722 is now WIFUND 200-355… I’d like to find a place for study materials in addition to the book…
Thanks again for all the study content on this site and those that update and answer questions, huge help for sure…
I just passed my ICND1 exam today
Thanks to 9tut
Congrats Anonymous… lots of success related to study materials here…
Can anyone confirm or deny that OSPF questions are NOT on the ICND1 exam? I ask because every dump I’ve found seems to have plenty of OSPF questions and answers…
Can one of the admins email me at lonnylegrand on the gmail network that is… need to ask about the wirelesstut site…
So a tricky part in the new DHCP sim. The new one……R3’s interface linked to R2 has “ip address dhcp” configured on it. So the answer for DHCP not being enabled is no longer correct.
The 4 answers are identical to the current sim listed here. However, R2’s DHCP pool config is “network 192.168.20.0 255.255.255.252” so, that means 3 IPs. BUT – R2 is 20.1 and its excluded, so that leaves 2 IPs….20.2 and 20.3, right? So I’m not sure what the updated answer should be. Both interfaces are up/up, the config on the pool is right, and dhcp appears to be enabled on R3’s interface. Any ideas???
@DRC Great observation on the DHCP SIM.. I AM also wondering what the answer could be?? and you remember this from your last exam?
@DRC Wouldnt there only be one IP available? .3 would be the subnet broadcast address. 192.168.20.4 would be a new subnet
@anonymous – that makes sense. it has to be the answer because the interfaces weren’t shut down and it was configured with ip address dhcp
https://www.slideshare.net/shaun_hummel/ccna-routing-and-switching-200125-75402865
What is the answer to the DHCP SIM then??
SO THE ANSWER IS incorrect dhcp pool on r2?
I passed my exam with 860/1000 on 10th may. The sims in my exam are security and DHCP. But, learn about the command and concept because the answers can be different.
I also got these question:
1-Which feature automatically disables CEF when it is enabled?
a) RIB
b) ACL logging
c) multicast
d) IP redirects
2-which statement about NTP is true?
a)each device is enabled as server by default
b)the default authentication key number is 1
c)the default stratum number is 5
d)the default source of an ntp message is the interface connected to the next-hop for server peer address
3-which information is used to install the best route to a destination in IP routing table?
a)the tunnel ID
b)the interface number
c)the prefix length
d)the autonoums system
Don’t know what the answer though. XD
any one can answer the above Kydra questions ?
Any ideas about the correct answer to this? The study guide says A but I’m not sure that is it.
Thanks!
You have configured the host computers on a campus LAN to receive their DHCP addresses form the local router to be able to browse their corporate site. Which statement about the network environment is true?
A. It supports a DNS server for use by DHCP clients.
B. Two host computers may be assigned the same IP address.
C. The DNS server must be configured manually on each host.
D. The domain name must be configured locally on each host computer.
@Jordan
1. ACL Logging (best option)
2. The default stratum is 5
3. The prefix lenght
Question 2, when you configure NTP the stratum number is 5 by default, when the ntp server is using its internal reference clock 127.0.0.0/8 subnet, and then it start adding 1 to this number depending on the distance between the reference server. Look at some NTP configuration tips (Tood Lammle book will help)
Question 3, the prefix lenght will help determine the best route for example /28 and /24 or /8 depending on route that it learn, from routing principle, a /28 route will be preferred to a /24 in making routing decision of the same learn route.
This is my best explanation, 9tut helps but understanding how it works in combination with this site its much fun.
@Vagabond, yes the dhcp pool is incorrectly configure, you can check if there is a lease by issuing the command #show ip dhcp pool, and the #show ip int brief to see the status of the interface, I think the config changes .
I passed the exam with 97%
@SW the answer should be “D” the host must configure with the domain name ” join it to the domain name” the host could still have an ip address without join it to the domain but won’t be able to browser to their corporate site. That is what i think 🙂
@DA7I I think you are correct! Thanks for your input.
@P2P Thank you for your input…so your positive its D ? 9tut was wrong on some things they even had an explanation for why D is correct…and for default stratum number 5 is that also 100% correct? I am taking exam third time sadly soonn I jus want to verify if everything is correct! There are a lot of misconceptions in the answers! Thank you all again for the help + feedback !
@DA7I referring to you…so you are pretty positive its D is it correct it seems right..I have been told security is still the same and most people are getting that along with DHCP…
passed a few days ago with a 9xx/1000
sims are the same but you have to know theory of what the questions ask.
I read Odom’s book and 9tut. All these other people posting about dumps are not necessary and a lot of the questions are wrong. if you can ace all the composite exams and can troubleshoot the sims you will be good.
What topics are covered under “Infrastructure Services” I need to hit that more for my CCENT test – Can anyone point me in the right direction?
@Vagabong i was referring to the question Kydra posted not what SW posted. For the question SW posted the obvious answer is D. Just study the concept and you will get everything right, i understand your fear man. But just do it. You will get confused if you are just relying on what different people are saying, remember most are also learning with limited understanding, all my answers are correct. Good luck with the exam
@P2P thank you so much for that, and verifying its all correct I hope no new questions hit that i have not seen…and yes it is confusing lots of misconceptions along with fear.. but this time I will pass! Wish me the best please and thanks!
THE DHCP SIM has 4 questions do you get 1 out of the 4 with security? I noticed most people are getting DHCP and security..and I do remember getting that..
I will give icnd 1 end of july …i have 2 question . how many labs include in icnd1? port security,ssh ,telnet or any other ? and second is all lab questions include in as a theory paper or other they will take labs in any simulator bases ?
@Rami, Everything you need to know about the exam is here – 2 Lab “security and DHCP with Nat and ACL”.. Read all the above comment is really useful info
@Vagabond Dude i’ve seen you posting here for weeks. You got this bro you know probably every questions. The sims where just a bunch of show commands and then answering the scenario correctly. I was not surprised by anything on the test after doing everything on this site and reading the PL test dumps ppl are listing.
@Kekistani Man I know I hope I got every question down and for the sims the DHCP..I just cant have a risk of failure..the dhcp on here is 4 questions so is that 4sims? so get 1 out of those 4 plus a security sim?
does anyone have the latest dump they can share with 332 questions?
Congrats Suzy! I will be taking it tomorrow at this time.
just passed, 941/1000.
I read the Odom book and did New Questions 1-3, DHCP and Security sims, and composite quizzes 1-10. I also installed packet tracer and used that for labs and practicing commands as i learned them in the book.
Everything is on here. DHCP/Security Sims are different answers than what are posted here. DHCP pool is incorrect, No ntp command configured, and interesting NAT ACL are the answers for the new sim. Good luck
can someone share the latest dump from lead2pass or anywhere else?
http://pintient.com/1hez
Test Engine that i get. Careful with the answer
@ZeroMind no one wants your garbage from last year. Judging by the date that file was created it’s dead lol.
@Jolie the website says, updated at 5/10/2017, LOL. its almost same as pdf that i get from PL. the answer can be different. search the answer here or google it.
the latest dump has over 300 questions.
Cisco 100-105 Dumps – 100-105 Question Answer – Dumps4download
Subscribe Education Certifications Channel | https://www.youtube.com/watch?v=NJPjRKCXPgI
332 questions dump, enjoy.
http://www.mediafire.com/file/yfz7xhd5akdadcc/Cisco.Premium.100-105.by.VCEplus.332q.pdf
@Jolie
Invalid
yeah I removed the link. No one was downloading it lol
Hey Jolie any chance you can re-upload as was only up for less then a day
taking the exam tomorrow noon… any advise mates 🙂
Make sure you have a grasp on switching
@Lil – Thanks mate
There is quite a number of new questions,i can say about 7 of them not sure if they were discussed here before.
1.something about exec-timeout command?
I can’t recall all the new questions i saw i hope people will start sharing them soon.
Know your way around DHCP,NAT,NTP as the lab configuration keeps changing.
You guys have been great, i wouldn’t have made it if it wasn’t for you.proceeding to wireless.
@Jolie, can you re-share those filles for us?
failed 825 🙁 big disappointment – ill keep trying thou I lost concentration on the security SIM.
@Everyone here is the 332 questions dump. if you download please say thank you :).
http://www.mediafire.com/file/hjawcm3zhcwp3su/Cisco.Premium.100-105.by.VCEplus.332q.pdf
@DA71 what do you mean you lost connection on the security sim
@DA71 What do you mean you lost connection on the security sim?? and Can anyone please update me with any of the new questions I been studying I cant fail…
@ccna or die He meant he lost CONCENTRATION not connection.. haha we all read that wrong I think..But all exam takers please update on here..I will be taking exam very soon its been sometimes now..
Hey Jolie thanks test next week. fingers crossed
No problem guys,
Let me know if this dump worked for them though please.
has anyone taken the exam recently. please provide feedback
@Vlad is that vmservices – CBI
@pal what vmservices?
practice questions on http://www.ciscovce.com
When I did run the command “show running-config” the outcome was lot of shit and I did miss read No service password encryption .. exam take please read carfuly and take you time when answering the sim question..
@Vagabond lol yeah I meant to say consentration
So what’s up with the security sim answers changing? And how about the DHCP ones..I really don’t want any brand new questions that I haven’t seen I must pass
So guys on the DHCP sim it means the link btwn R2 & R3 is down
so what’s the answe? Wasn’t it DHCP pool config incorrectly configured ?
Question for all. I was wondering about the dumps for ICND1 100-105 and how there is a decent amount of questions regarding OSPF. I just finished the Cisco Academy for ICND1 and we used RIPv2 for all configurations. Does anyone know if the test is still requiring the knowledge on OSPF? As we didn’t cover it much just briefly.
Taking the test tomorrow can anyone verify what are the sims and if ICND1 V3 part 1,2,3 are all I need to review
why is Suzy Moore and john holland post the exact same
WTF ??
Hi! Just passed 100-105 exam yesterday!!!
9xx/1000 points!!! (The passing score is 832/1000)
are Suzy Moore and john holland dumps any good or just fake ???
i wonder can any give some advice.
thanks
@Val the dhacp sim
Examine the DHCP configuration between R2 and R3, R2 is configured as the DHCP server and R3 as the client. What is the reason R3 is not receiving the IP address via DHCP?
A. On R3, DHCP is not enabled on the interface that is connected to R2.<<<<<<<<
B. On R3, the interface that is connected to R2 is in shutdown condition.
C. On R2, the interface that is connected to R3 is in shutdown condition.
D. On R2, the network statement in the DHCP pool configuration is incorrectly configured.
show running-config i got
interface Ethernet0/1
description Link to R2
DHCP
then i did show ip interface brief and there was no ip address assigned.
the rest of the DHCP question was the same as the one on 9tut with different ip address configuration to be honest..
What about the security sims answers and difference? Is DHCP all u get that question and security ?
Please can someone give share a link for the security sims
Hi Guys I will be taking ICND1 v3 exam on the 15th of June, Please advise with tips and maybe latest dumps. m.o.a.gi.cam. at g.mail.com
@pal good questions. I think I saw the same posts some time ago as well and they are re-posting. makes me wonder about the dumps. Especially because there are a bunch of OSPF questions however I did not learn much about OSPF in my network academy class.
@Vag … When u ganan take your exam bro… Yeah DHCP was easy for me.. I had only Two SIM.. and 52 multiple choice Q .. My advise to you is that make sure you know IPv6 Q and the rest of the question came from 9tut.
I booked mine for next week, wish me luck mate 🙂
@DA7I So is the DHCP SIM all 4 questions you get counted as 1 sim? So just that and the security which is 4 questions and thats count as 1 sim? I will be taking it soon
@Val yeah each SIM contain 4 Qs.. and I believe if you answer 1 wrong from the 4 SIM Q mean the other will be marked as wrong as well.. wana take mine sooner than later but could not find availability for this week.
@DA71 Really??? 1 wrong and its all wrong?? is there different answers on security sim??
Wheres the proof for that I thought thats only for multi choice?
Pipe down Vagabond.
@DA71 – A is not the answer. Look at your running config. DHCP is enabled on the interface facing R2. The show ip int b shows no ip assigned bcoz the int is shutdown
@ccna or die whats the answer then? Is it B?
@Vagabond according to his run config output B wins
How did u figure that out?