Share your ICND1 v3.0 Experience

How many primary ipv4 addresses can be
assigned on router interface ?
A. 0
B. 1
C. 4
D. Unlimited

Forum:
Cisco IOS software supports multiple IP addresses per interface. You can specify an unlimited number of secondary addresses. Secondary IP addresses can be used in a variety of situations. The following are the most common applications:

Can you confirm this?

dont know why but my comment wont post

Dump is pretty valid i scored 79*/1000 which i wouldn’t of got near if i didn’t have the dump.

lots of new questions that i did see tho also cant be sure if the answers for some of the labs are correct.

but i really cant remember what came up all i know is i fuking hate this

D.1518

Thank you @have tou rebooted it?
but
How many primary ipv4 addresses can be
assigned on router interface ?

see my post

B. 1 primary

Why 1? Cisco IOS software supports multiple IP addresses per interface. You can specify an unlimited number of secondary addresses. Secondary IP addresses can be used in a variety of situations. The following are the most common applications…

You’re right rifht, SECONDARY. Lulz

Hi Guys im sorry but i really need help, i have failed 6 times and on Friday is my last chance or else i will lose my job. i cant afford this really. please i really need this i cant i cant lose my job

hey i just found this it might help http://www.academia.edu/14081058/ICND1_Basic_Questions

also i scored really low on infrastructure services if some one could please let me know which questions this covers

Pal what type of questions did you get regarding InfraServ?

Any one have a link to free cbt nuggets vids?

Sorry to bother with such a stupid question,is OSPF an icnd1 topic? do i’ll find it in the CCENT EXAM regardless there’s almost no mention of it in the official cert guide?

@Have you rebooted it? ,not a clue thats why i asked for advice on it. i don’t know what falls under infrastructure services

can somebody please update me on the exam…

Inappropriate Banner is correct or no? (in lab security)

@routerA , thats what i would love to know as well. so much conflict anws on that one

F**k – 2days to My exam but i want know how reply to i inappropriate banner… If someone have news post here

Any wording that implies a login is “welcome” or “invited” is inappropriate. In curriculum netacad…

https://www.ciscofeedback.vovici.com/se.ashx?s=6A5348A739DB9319

i think we really need a more up to date Dump as this one is not so valid anymore. i will try to work on one unless someone has an up to date one for this month.

does anyone has taken exam this month if so how about the questions?
are most of the questions from 9tut?

Passed 96X/1000. Dump valid 99% lab dhcp and security.. Yeah!! Inappropriate banner is correct answer

@routerA which dumps

10.Which statement about NTP is true.
A.Default Stratum 5, Default Stratum1, 3 other options

what is the answer for this

@routerA which place are you from?

@ RouterA which questions were wrong on the dump?

@RouterA thats not true about the dump valid percent

@pal even i got that doubt man

@pal have u taken the exam

yep twice

332question in previous page. Default stratum 8 only 2% are wrong

@pal so you didn’t get the questions from dumps

@routerA are u sure you got 99% questions from dumps, i am taking the exam next week

@pal what is the reason u failed for 2 times

@ccna i did i studied the dump but there are a lot of new questions on the exam that are not on the dump. the dump will get you at around the 760 to 790 mark

@ccna this is dependent on the random questions you get

@pal there are new questions in 9tut 3-parts excluding that we will get new questions am i right

@router what abt sim questions are they same?

In sim change only the config.. Study the logic. I have used show run… Show ntp status and show access-list. Dont worry is easy

baby giant 1518 or 1600?

1518

@RouterA how many questions would you say were not on the dumps?

2-3 @nick (i have found all question of dump on my exam (100%)).

Thank you for answering our questions… any ospf questions on the test @RouterA

what are the DHCP and security answers? any new questions

isnt it default stratnum 5 where is 8 in the options?

@routerA i thought for dhcp you use Show ipt int brief and show run and for security u only use show run right?

No ospf question. – DHCP and Security answer are different. whenever the sim config change at random – 8 is in option. Don’t worry. Cisco not calculate this question. (is experimental) you can wrong answer. | For security i have used show run and show ip int brief – For dhcp i have used show run, show ip int brief , show access-list, show ntp status

@ccna . where are the new questions in 9tut ??

@routera why would you use show ip int brief for security? 9tut only says show run? and for DHCP it only says show run and show ip int brief why show access-list and show ntp status?

You can use only show run.. Show IP int brief for check interface shutdown or not

where did u get show access-list and show ntp status from if its dhcp isnt it only show ip int brief and show run…

There is a answer “NTP command not configured in R2” if you want check, you can use show run and check the line “ntp server xxx.xxx.xxx.xxx” or you can use show ntp status. If the router response with NTP is disabled, answer is correct. You can use only show run.. In the running there is all config 🙂

oh ok what about the security answers? one of them is inappropriate banner? and how about the rest of dhcp? ill be taking soon I appreciate your help

Any wording that implies a login is “welcome” or “invited” is inappropriate. In curriculum netacad… Rest of dhcp is different.. don’t worry is simple!! or interface in shutdown mode or dhcp pool is incorrect. You can verify with show run 🙂

how do i know if if the interface is in shutdown condition and not dhcp pool is incorrect? what about the other security answers too? besides the inappropriate word banner

@routerA, we can type the commands as many times as we want in exam for sim questions?

Only show run is good. If there is shutdown in show run, the interface is off

Guys!passed easily, vce+332 good material for exercising,especially the testlet, questions and answers are accurate at a rate i would say around 90% ,just few answers are wrong,by this i mean very few and you can easily spot them,this said good luck to every one!

@sseed what is the testlet ? what page of the vce332 is the testlet on ? thank you for help

Hi I easily pass today the test the question are valid 95%
Read all questions and practice with vce

Thanks you guys all for a wonderful help

@Jeseer how do you practice with vce ? pls

@sseed how did you use vce from that 332q

how to convert that pdf to vce file please help

are there any ospf question in the exam?

A user have converted 332q in vce in previous page

I’ll upload the VCE later that matches the PDF I uploaded. Has anyone passed using the dump I provided?

I have passed 96X/1000 using dump 332q

Great I may study it and take it. I shared the dump and never used it lol. I even paid $50 for it. Thanks routerA imma take it next week now probably

Thank you @Jolie 🙂 you saved me

Guys don’t get scared the test is not that hard if you want to use the vce download the files and Google how to use vce you have to install android on your Windows pc

Remember the certification doesn’t do any good by itself you need to understand the technology in details watch cbtnuggets
And do some labs it will help you allot.

I plan on watching the whole cbt nuggets course then studying over the dump. I plan on brain dumping project+ though bc that test is stupid as anything.

What are the other security answers besides inappropriate banner?

@ jolie what page is your converted pdf on?

Took it today, pretty easy, & geared towards Cisco (duh)
Brush up on DHCP in case you get it. You

@sup how about the questions did you get it from the dumps

Guys there are no dates until next thursday in any center any idea of that

Someone of them are incorrect, I didn’t use them as a primarily source to study so I couldn’t tell you.

took it last week, most of the answers on here, got the Security and DHCP sims, worded slightly differently tho. Was worried about IPv6 addressing, but not much of it really, nothing relating directly to addresses valid/invalid.

What about other questions from sections like infrastructure services And mantainance

what do you mean the DHCP and security questions were slightly different? you mean the answer is different?

778/1000 was maybe 3 or 4 questions away from passing. Used Packet Tracer, Todd Lammle’s book, and test lab at work as well as helping my work with extra projects. I didn’t use 9tut but now I’m going to use them as resource. To be honest I was surprised I felt like I had a strong understanding of routing but guess I know where I stand now. Also no subnetting wtf lol

Also didn’t use a dump or anything as I will be using these skills at work alot….

@Dbro did you get any sims and how many. Is it still the DHCP sim or something else

do we have RIP simulation in ICND1 exam?

No RIP. Lab is DHCP and security. It is the same on 9tut but with different config. Is simple. You can study the logical on 9tut

@routerA thanks man, but the dumps you said 332q there is RIP simulation in those dumps.

Yes, if you see the sim lab on 9tut, (dhcp lab) there is RIP but there is not question about it.. Don’t worry.

I have passed 96X/1000. No RIP question! The question of lab sim are the same on 9tut but with different config.

i need help!! please someone what is this dump website you guys keep mentioning is it good preparation for ICDN1??

http://www.mediafire.com/file/hjawcm3zhcwp3su/Cisco.Premium.100-105.by.VCEplus.332q.pdf

I’m taking my ICDN1 exam next week can someone please give me a valid website to prepare that has most of the questions similar to the test

Thank u @RouterA

do yo know about the dump website everyone keeps mentoning?? @RouterA