Share your ICND1 v3.0 Experience

or the DHCP pool on r2 is incorrect?

I am reading the dhcp explanation for 9 tut and the security I done some packet tracer too for dhcp and security still confused a little

go to DHCP page and someone has it on the comments

I have seen that.. thats 1 of the questions right? the interesting traffic for nat acl option..

Yep

simple if you understang the question.

thats what u got ? thats 1 of the 4 questions tho.. and for security I am still little confused I just want to pass I have been studying

You have configured the host computers on a campus LAN to receive their DHCP addresses form the local router to be able to browse their corporate site. Which statement about the network environment is true?
A. It supports a DNS server for use by DHCP clients.
B. Two host computers may be assigned the same IP address.
C. The DNS server must be configured manually on each host.
D. The domain name must be configured locally on each host computer.

What is the correct answer here???? Different answers in different dumps 🙁

Along with NAT (network address tunneling)
, RFC 1918 facilitates expansion of the
usable number of IP addresses available
under IPV4, as a stopgap solution to
prevent the exhaustion of public IPs
available before the adoption of IPV6 .

just now passed the exam 930/1000
thanks to 9tut you guys are awesome man
guys dont worry all question from 9tut
i got only 2 sims dhcp and security

in sim question i just used show run, show ntp status.

Dynamic NAT is used when you have a “pool” of public IP addresses that you want to assign to your internal hosts dynamically. Don’t use dynamic NAT for servers or other devices that need to be accessible from the Internet.

Why applications that are installed on PC’s in R2 LAN network 10.100.20.0/24 are unable to communicate with server1?
A. A standard ACL statement that is configured on R1 is blocking the traffic sourced from Server1 network.
B. A standard ACL statement that is configured on R2 is blocking the traffic sourced from Setver1 network.
C. A standard ACL statement that is configured on R2 is blocking the traffic sourced from R2 LAN network.
D. A standard ACL statement that is configured on R1 is blocking the traffic sourced from R2 LAM network

where can we see about certificate and any steps to follow after exam like registration to get certificate

@domera so that makes rfc 1518 correct right

@ccna What did u answer for the examine the DHCP config? did it have IP address dhcp in it?

@vagabond yes,
don’t worry about configs just use show run and check the config according to the options in the questions

What did you answer for it ? And I take it Saturday please I can’t fail

dhcp is not configured on one of the router,
don’t worry man be calm and understand the sims in 9tut

I need to pass…its been on my mind for months..and did u pick on r3 dhcp is not enabled?

Took the test not to long ago and failed. Bunch of stuff I was not expecting. questions on phones, serial connections, and to answer your questions yes I had a handful of subnetting questions.
the interactives were pretty much only show commands only as well. better get good at reviewing the show running

what do you mean not expecting?? Did you use 9tut …

can anybody confirm if they saw any new subnetting questions thats not on 9tut??

Vagabond is gathering info for selling dumps

I’m pretty sure that’s what he is doing also. He’s been here for months asking the same questions.

I am not selling anything I am taking exam saturday..how can you seriously say that

It took me a while to get the exam paid for cuz my brother jus paid for it..selling dumps is for losers and I was misguided by those questions wit those sold dumps

@nick how can you make such a rubbish conclusion..I am just asking a question I want to pass this exam.

@Vagabond just sit the exam… You will surelybe ready

@mochan thank you for that I do sure hope to pass.. my bro is relying on me..those 2 other times I took it I skipped something sadly..I am just curious on how the SIMS look like when it shows up..I never typed any commands like I was suppose to.

whats the answer on this one?

You have configured the host computers on a campus LAN to receive their DHCP addresses form the local router to be able to browse their corporate site. Which statement about the network environment is true?
A. It supports a DNS server for use by DHCP clients.
B. Two host computers may be assigned the same IP address.
C. The DNS server must be configured manually on each host.
D. The domain name must be configured locally on each host computer.

and also this one..
on the other dumps the answer is ARP? how is it?

Which table displays the MAC addresses that are learned on a switch?

A.FIB
B.ARP
C.TCAM
D.CAM

ah okay, that makes sense.. i thought it was the CAM.. so the answer ARP is correct..

“Systems keep an ARP look-up table where they store information about what IP addresses are associated with what MAC addresses. When trying to send a packet to an IP address, the system will first consult this table to see if it already knows the MAC address. If there is a value cached, ARP is not used.

If the IP address is not found in the ARP table, the system will then send a broadcast packet to the network using the ARP protocol to ask “who has 192.168.1.1”. Because it is a broadcast packet, it is sent to a special MAC address that causes all machines on the network to receive it. Any machine with the requested IP address will reply with an ARP packet that says “I am 192.168.1.1″, and this includes the MAC address which can receive packets for that IP.”

please help me on this one..

Which set of conditions comprises a successful ping attempt between two connected routers
configured with IP addresses on the same subnet?
A. The destination host receives an echo reply from the
source host within one second and the
source host receives an echo request from the destination host.
B. The destination host receives an echo request from the source host within one second.
C. The destination host receives an echo reply from the source
host within one second and the
source host receives an echo reply from the destination host within two seconds.
D. The destination host receives an echo request from the source host and the source host
receives an echo request from the destination host wi
thin one second.

Which NTP concept indicates the distance between a device and the reliable time source?

is it STRATUM?

A.clock offset
B.stratum
C.reference
D.dispersion

Which technique can you use to route IPv6 traffic over an IPv4 infrastructure?

A.NAT
B.6to4 tunneling
C.L2TPv3
D.dual-stack

Vagabond changed the name to hacker777

No you are also talking Stupid all of u guys have me advice..this guy is spamming

Gave me tips and advice.. I am testing Saturday I must pass

im not spamming.. ok? im just curious with this questions.. and different dumps has different answers on same questions..

Ping sends echo request, destination host sends echo reply, source receives reply in 2 sec

tips @vagabond be calm and study the question properly don’t answer in hurry and all the best.

@mark3 thanks bruh

Pppassssss , thank you all for 332q ,vce
and packet tracer files. All questions was from dump
2 or 3 subnet questions , configs were different . I was stressing out for nothing was easy . Will do AMA in the evening lol

Those subnet questions was from dumps right..I am stressing out too I never did the simulation attempt

Which table displays the MAC addresses
that are learned on a switch?
A.FIB
B.ARP
C.TCAM
D.CAM

D.CAM

yes its CAM. thanks @domera

all the questions was from 332q . the configs were a bit different mainly same thing but on different
interface or router. even though the configs are easy to me on exam i was very stressed while sorting out so that adds some difficulty to it

hackker777 June 23rd, 2017
ah okay, that makes sense.. i thought it was the CAM.. so the answer ARP is correct..
“Systems keep an ARP look-up table where they store information about what IP addresses are associated with what MAC addresses. When trying to send a packet to an IP address, the system will first consult this table to see if it already knows the MAC address. If there is a value cached, ARP is not used.
If the IP address is not found in the ARP table, the system will then send a broadcast packet to the network using the ARP protocol to ask “who has 192.168.1.1”. Because it is a broadcast packet, it is sent to a special MAC address that causes all machines on the network to receive it. Any machine with the requested IP address will reply with an ARP packet that says “I am 192.168.1.1″, and this includes the MAC address which can receive packets for that IP.”

CAM maps ports to the MAC addresses found on the ports. ARP matches IP addresses to MAC addresses.

MAC table = layer 2
ARP table = layer 3

please send me the new dump becoase i have exam tomorrow plzzzzzz

@FM why don’t you read through the posts and find it?

I have exam tomorrow too please wish me luck I have been studying

Good Luck Vagabond !!!

im glad you have been studying

So those subnet questions were from the site correct..and more concerned about the sims
But been practicing I better pass

Wasn’t it the same concept for sims you”re talking about DHCP right

all subnet questions i had was whats the subnet id of 100.12.12.54/26 ?
i had dhcp sim
the answers were different . on 9tut first question is because its not enabled on r3 . my one was i think acl blocking traffic or something like that but i remember it was enabled on r3.
all was done with show run and tabbing was enabled

there are packet traces files on 9tut with dhcp and that one with 1switch and 1router connected to pc whitch i dont see anymore next to labsim security sim i think it was called , i had that one as well
do that packet tracer files

what did you answer the shut down condition option? and you got a new subnetting question?? what did you answer for the subnet ID ? is it 10.12.12.0?

the dhcp packet tracer file I have is r2 connected to r3…?

Passed today – Highly recommened you use the most recent dumps as well as 9tut as a lot of questions from dumps were there.

Please I have been doing that…what was your dhcp and security like I take it tomorrow I have to pass!

vagabond you have no clue about any of this do ya?

I have been practicing dhcp and security with the packet tracers… i reviewed questions for a while now on both dumps

the sim is easy its just show run , check acl’s , dhcp , nat ,ntp , shut no shut plus it even tells on what router the problem is

ok thank you for raising my confidence.. I noticed some people got the answer for dhcp that on r2 dhcp pool is incorrectly configured..? I wonder what that looks like and I understand if there is dhcp on r2 or somethign and r2 says shutdown in show run its in shutdown condition correct?

Hello Everyone I have 6 que. , and i need the correct answer please ..
1- Which value is indicated by the next hop in a routing table?
A. preference of the route source
B. IP address of the remote router for forwarding the packets
C. how the route was learned
D. exit interface IP address for forwarding the packets

2- Which MTU size can cause a baby giant error?
A. 1500
B. 9216
C. 1600
D. 1518

3- Which RFC was created to alleviate the depletion of IPv4 public addresses?
A. RFC 4193
B. RFC 1519
C. RFC 1518
D. RFC 1918

4- Which dynamic routing protocol uses only the hop count to determine the best path to a
destination?
A. IGRP
B. RIP
C. EIGRP
D. OSPF

5- After you configure a default route to the internet on a router , the route is missing from the routeing table which option describes a possible reason for the problem?
A. the next-hop address in unreachable.
B. The default route was configured on passive interface.

6- A technician is troubleshooting a host connectivity problem. The host is unable to ping a
server connected to Switch_A. Based on the results of the testing, what could be the
problem?
A. A remote physical layer problem exists.
B. The host NIC is not functioning.
C. TCP/IP has not been correctly installed on the host.
D. A local physical layer problem exists.

please help me

you know if you goolge you will find the answer and you will not need to ask these questions over and over by different nicknames

@nick stop making assumptions different people are asking this!

I think vagabond has no actual experience or study time, he’s trying to pass this only dumping lol. Good luck on interviews vagabond.

I have been studying Jolie I don’t know what you are saying sounding stupid

I have been studying for months and what interviews stop making stupid assumptions you shared the 332 Q dump with us

no i had a look on few pages you only asking about updates dude you are just gathering new questions to sell dumps what kind of idiot would spend months asking for updates instead of actually studying . you said you have taken exam two times already any one who takes exam twice would really know what is going on and what he needs to improve.

Right Nick, he’s selling dumps lol, either that or he’s trying to pass the exam by only dumping and not actually studying.

It took my brother a while to pay for exam please read what I said I am trying to pass both of you guys are gulliable people

I practiced packet tracer and all of that and 9tut you guys are not helping by accusing

The questions you are asking are very easy, if you are seriously taking the exam you are screwed when someone asks you questions in an interview lol.

Yes wish me luck tomro instead of ridiculing people and after the exam and I pass hopefully I study more material

wish me luck tomro instead of ridiculing people and after the exam and I pass hopefully I study more material

Do you know basic subnetting?

I practiced that already dude I jus pray nothing new comes up

I said earlier all the questions was from the dump. Even if they have new questions it’s not going to be to many also if you have taken exam before you should be able to answer some. Good luck Vagabond let us know how it went. or where to buy a good dump lol

BRO I am not into buying dumps I never did…and thanks I will let you know man..

that subnet question u got earlier was a new one tho wit the subnet ID being 10.12.12.0? I just pray I pass and get this over with my brother and fam is relying on me its stressful.

Seriously dude? You are focusing on was it a new question and not on that it was the easiest subnetting question possible?
…. there we go people……… we have a fukin rat

I am just asking i know the sims r most important.

nobody is being a rat its asking questions that is not helping u by saying stuff like that.

not helping me* …

Mark3 I’m pretty sure he’s a rat also. He doesn’t seem to have any networking knowledge at all. He only asks what’s the answer, most people want to know how to work out problems.

Why is your family relying on you? You seem to have 0 networking knowledge so you won’t be able to get a networking job.

I have been working out problems FYI Have some courtesy for some people..

I am pretty young I been studying this jus asking questions.. and you are such a lethargic person.

You are either selling questions or trying to pass by only dumping. Both are bad.

nope not selling questions don’t have time for that… and I am using 9tut like you did as well.. and along wit dumps working out answers especially for the sims.

Okay well good luck tomorrow.

Thanks for that…

No you supposed to work out questions without given an answers if you know this stuff you should be able to answer questions without knowing the answer, so now you pretending to be a poor boy that family relies on and you decided to cheat? For the third time? A mean come on it doesn’t make sense any of this

pretending..comon now guy and what do you mean cheat..just wish me luck nobody is cheating all the methods you used I am using.

OK now I have a theory… Vagabond is a 9 tut bot that keeps people involved ( I guess it’s beneficial for the site) by constantly asking questions with different nicknames – how I know that? If u look up there’s question by Hasan I said if u goggle you’ll find answer without addressing it to anyone, so Vagabond jumped in to defend himself OK we know it now. So who is this mysterious person? Is he a 9tut bot ? a Chinese dump seller? Or a gypsy fortune teller?

@nick is a funny guy ignore him too many assumptions his claims are braindead