Share your ICND1 v3.0 Experience

@Johny I answered C but I’m not sure if it was a correct answer. Hopefully ICND2 doesn’t have this kind of useless questions

@G Ore Did you have to configure something on SIMs or just use show commands to answer questions?

Hey Guys , What about the sim in the ICND1 exam?? What type of sims can i expect in exam? DO i have to use just show commands or any hardcore configuration in exam?

Did anyone have DHCP for IPV6 in their sim??

what is the correct answer for this question??

Which MTU size can cause a baby giant error?

What is the 332Q dumps everyone is talking about? IS it in 9tut.net istesilf or somewhere? Help me I have exam day after tomorrow.

ma nepali – go through previous pages of this forum – you’ll find 332q pdf somewhere around 25th page…

I have a new dump now. 351q

Joile can you share it, pleeease 🙂

@ ms thank you man!!!

@Jolie Could you please upload the 351Q dump when you get a chance? I have exam tomorrow…

Passed ICND1 today with an 850.. Thanks 9tut!

Hey Chuck what did you get in SIm?? IS sim problem similar to given in 9tut?

SIM topology is same but configuration is different, to cope with those thing you have to understand from basic

I have done all the configuration problems of NEtacd. Is that enough?

RFC 1918

Jolie I am waiting for the 351Q dump… Thank you in advance!!

Enjoy guys, 351q dump.

https://www.mediafire.com/file/a3jult5x831n0bx/Cisco.Premium.100-105.by.VCEplus.351q.zip

@Jolie

You r great!!! God bless you

Thank you Jolie.. You are the best… Thanks again..

No problem guys

thanks Julie

thanks Jolie

Has anyone noticed any mistakes in 351q dump?

@Jolie,

With that 351Q dump, were questions just added on top of the 331Q? Or were any answers changed?

I didn’t make it, I bought it for myself and I feel people should share knowledge not make people pay a ton of money for it. But it looks like more questions were added to it.

@jolie. Thanks! That’s nice of you.

ANy tips on how to solve sim problem? i am just revising.. i have exam in 4 hours!!!

@ms only show commands

I passed today with 895. Onto ICND2. Thanks 9tut and everyone who posted advice!

Congrats

Hello everyone!!! Cleared my ICND1 with 1000/1000 score.. i finished my exam in 35 minutes!!! Will my reesult be valid or invalid??
I know i am dumb, i should have waited for some time … any suggestions??

Lol that’s really fast.

Everything was from 9tut… thank you jolie once gain..

Hi Pe3Ps

Been reviewing 9TUT material and the 332q VCE. I am former CCNP, so I hope to have some good input. I will keep you all posted as this seems to be a Great Community.

which program are you guys using to open up vce files?

Picklerick download the new dump I uploaded. It’s 351 questions

my exam will be soon. @Bill @ma nepali the 9tut material is valid??

Yes, 9tut is more than enough… I scored a perfect score because of 9tut only.

@ma nepali All answers in the dump are collect, aren’t. what does the answer are differ form dump. Could you please share for everyone.

Thank you so much 9tut – I got 895 marks in icnd1 – everything was from 9tut. Keep up the good work.

The dump and 9 tut are almost similar. Be perfect with 9tut composite quizzes, you will do fine in exam

I think there were only 4 or 5 questions new in icnd test. Rest everything was from 9tut

Just complete ICND1 with 832/9xx.
Sim was DHCP and Security. For DHCP sim, there was a part where ntp server command is completely missing unlike the one in 9tut where the ntp server command is just pointing to the wrong ip address.

Cheers!

Congrats @ma nepali such a brilliant score.Then @ma nepali could you please answer these question? as you got 1000 that means all your answer was correct. I am done with ICND1 , but i need to know the answer

1.Refer to the exhibit. Which statement describes the effect of this configuration?
Router#configure terminal
Router(config)#vlan 10
Router(config-vlan)#do show vlan
A. The VLAN 10 VTP configuration is displayed.
B. VLAN 10 spanning-tree output is displayed.
C. The VLAN 10 configuration is saved when the router exits VLAN configuration mode.
D. VLAN 10 is added to the VLAN database.

2.Which MTU size can cause a baby giant error?
A. 1500
B. 9216
C. 1600
D. 1518

3.Which RFC was created to alleviate the depletion of IPv4 public addresses?
A. RFC 4193
B. RFC 1519
C. RFC 1518
D. RFC 1918

4. Which one is the stateless address assignment?

1.DHCP
2.DHCPv6
3.autoconfigutation

it will be helpful for new commer.

@Jolie
Got it, my VCE app wouldnt open it 🙁

I need help. I will take my exam next week. Please send me the latest dump question to damaso dot rizal80 at gmail dot com.
Your help is highly appreciated.

I need help. I will take my exam CCNA 200 -125 next week. Please send me the latest dump question to damaso dot rizal80 at gmail dot com.
Your help is highly appreciated.

@ma napoli did you just use 9tut and 332Q dump? did you change any answers? Please answer thanks.

@Lackadaisical_cisco i was lucky i ididnot see any questions from above. I just used 9tut only. But i had studied both odom and lamle boook throughly

@Lackadaisical_cisco,ma nepali,Joile,Rahi
Are there any questions on OSPF? There are few questions in some of the dumps one used, but I’ve had a look at the exam topics and OSPF isn’t stated.

Yes one basic one.. ospf is a link state rputing protocol thats it..

Q. 298
If three devices are plugged into one port on a switch and two devices are plugged into a different port, how many collision domains are on the switch?

A. 2
B. 4
C. 5
D. 6

Dump says B, but isn’t the answer C? Because switches break up collision domains.

Innovior IT Tech

how to access the ICND 1 exams in that link

how to access the ICND 1 exams in that link

Hi guys…any full version VCE exam simulator available…. Pls share website

https://www.youtube.com/watch?v=hBkDPQH-zR0&t=14s

Thanks Nobody0078 any site with crack version

Q.298

that que is saying 3 devices are plugged into one port on a switch and two plugged into a different port
can you plug 2 or 3 devices on one switchport

Passed in the 900s. 332q dump is very much still valid.

Dear all tomorrow i have a exam ICND1 do you have update dumps kindly send me

omar.rasa2 @ gmail . com

why so many ospf questions

Complete exam preparation package.
PDF+VCE with Real Exam Simulation Software
60 days free updates

https://docs.google.com/document/d/1cp2vtCYSV_21JTZF9D14Ua2gHdijtZjfIDuyVT1NyJg/edit?usp=sharing

For Any support moeez.dean hotmail com

Here is the latest dump again so people don’t have to search far.

https://www.mediafire.com/file/a3jult5x831n0bx/Cisco.Premium.100-105.by.VCEplus.351q.zip

Q. 298
If three devices are plugged into one port on a switch and two devices are plugged into a different port, how many collision domains are on the switch?
A. 2
B. 4
C. 5
D. 6
Dump says B, but isn’t the answer C? Because switches break up collision domains.

Two hosts are attached to a switch with the default configuration. Which statement about the configuration is true?

A. IP routing must be enabled to allow the two hosts to communicate.
B. The two hosts are in the same broadcast domain.
C. The switch must be configured with a VLAN to allow the two hosts to communicate.
D. Port security prevents the hosts from connecting to the switch.
Answer is : WHAT

Moro the answer is B, because the ports in the switch by default are in vlan 1 and then VLAN 1

Hi guys,
In Jolie’s dumps, there r plenty of questions from OSPF, even though OSPF is main topic in ICND-2 not in ICND-1.

Please comment if we can escape OSPF questions in dump for ICND-1 exam? Especially those who recently have passed the exam.

Thanks in advance to all…….Cheers

ICND1 schedule Saturday

hi Sayusuf, which dump are you using for study `? There was a lot of dumps and I’m not sure which one is valid!

I have the only valid dump. I’ve shared a download link multiple times. Use either the 332q dump or the 351q dump

Hi Jolie, Thank you for answering my question. My test will be in 2 days. I’m learning your dump but this dump have a lot of OSPF QUESTIONS and wrong answers!

Correct them and share the right answers?

I’m not sure, what are the right answers ! but i will try 🙂

COMMENTS AWAITED ON,,,,

Previous Post:
Hi guys,
In Jolie’s dumps, there r plenty of questions from OSPF, even though OSPF is main topic in ICND-2 not in ICND-1.
Please comment if we can escape OSPF questions in dump for ICND-1 exam? Especially those who recently have passed the exam.
Thanks in advance to all…….Cheers

This is because ICDN1 100-101 (the old version) had OSPF but 100-105 dont have right now.

@nobody1111
Thanxs

Other please comment who have recently sit in exam for 100-105

Please share right dump……

Read comments my dumps are very valid lol

Ok thanks Jolie, any other Exam materials to be shared please?????

Hi Jolie,
Do you know what is the right answers for the following questions

if three devices are plugged into one port on a switch and two devices are plugged into different port, how many collision domains are on the switch?
2, 4,5,6
in the dump they say that 4 is the right answer. I’m confused because the 3 devices cannot plugged into one port for example. And each port ist a collision domain. So for my point of view the answer is 2 because we are talking about 2 ports. What do you think `?

the next question:
which three commands must you enter to create a trunk that allows vlan 20

A. Switch(config-if)#switchport mode dynamic auto
B. Switch(config-if)#switchport mode trunk
C. Switch(config-if)#switchport trunk allowed vlan 20
D. Switch(config-if)#switchport mode dynamic desirable
E. Switch(config-if)#switchport trunk encapsulation dotlq
F. Switch(config-if)#switchport trunk native vlan 20
the dump say that the Answer is: BEF

but i think that, the real commands are
B. Switch(config-if)#switchport mode trunk
C. Switch(config-if)#switchport trunk allowed vlan 20
E. Switch(config-if)#switchport trunk encapsulation dotlq
because no one told us that, the vlan 20 is the native vlan

what do you think also about this question?

guys do you have any answers for my questions?

passed today with jolies

Any OSPF questions? What about labs?

hnny
August 13th, 2017

guys, please comment about this question. from my understanding I think it should be A. because several devices cannot be connected to the same port of the switch. So, at least there is a HUB where the PCs are connected and the HUB is connected to the single switch port. which is 1 collision domain per port on the switch making 2 in total. right? please confirm.

Q. 298
If three devices are plugged into one port on a switch and two devices are plugged into a different port, how many collision domains are on the switch?
A. 2
B. 4
C. 5
D. 6

Yesterday I passed CCENT with 88x/1000 score. Most of the questions were from 9tut but I remember that some (I guess ~5) were completely new. I had even a question regarding IPv6 where, based on binaries!, I had to guess particular type of IPv6 address. When it comes to simulations I had only Security Testlet.

NJP my point exactly

I passed the CCENT today and the dump of Jolie is valid!
my score was 932 of 1000.
@ Jolie : thank you for the informations. Do you have the dump for ICND2.

Best regards

congrat. for the success in ICND 1 , may exam is Saturday and I am taking Jolie dump main reference, did you have any OSPF questions? can you bring your pen with you? please advise Thanks very much and good luck with ICND 2

There was no ospf questions except of Ad and ospf as Link state Protocol.
best regards

My ICND1 tomorrow Aug 19, wish me a good luck!

Jolie YOUR ARE THE BEST!!!!

thank your for your support 9tut also is a perfect website for preparation!

@Alm

Thanks for sharing your experience about exam and on OSPF.

Appreciated…..

Passed today guys.
90% is on here.
Like the comments on here before….know how to troubleshoot the sims (EIGRP, OSPF and GRE)

congrat.
of course you are talking on ICND 2? right

I failed 801

Why Anonymous exam was difficult?

Hi all i have download the related dumps 332q & 351q, in what extend these questions are included in the exam 100-105? I assume that a potion of these questions are the same… (?) Are the dumps still valid ?