Show Configuration Sim

Even if these are not the correct ones on the current exam, they are great for studying and understanding what to expect. It’s difficult to find practice exams with simulation questions that aren’t either completely wrong or extremely difficult.

I thank you.

I took ICND1 and failed with 750 today.Pls halp me cause I want to pass my exams.
A friend direct me to this websit.Pls if there is any resent dump help me or I am going to lose my job,Thanks. my e-mail is ibrahimjjallo@yahoo.com

this is on the test. I just took 822. this was on there…i passed.
for help with test go to http://www.examcollection.com
go to 822 section…there look at the 2 newest files….named ariel and robbie in the download name. study those…..good stuff..

i got this one on the test

Hey, thanks 9tut for all of these lab examples, I took my test today and passed with an 812 and 1 minute and 25 seconds left on the clock. I had 4 labs on the test that came from this site and this was one of them, thank you.

P.S. the info on this site is gold

I have attempted the CCNA at first and realized it was too much in too choert of a time. I have nto been allowed to take classes, I am only able to book learn with no other instruction so I just want to say that the approach 9tut takes with the explanation of how to get to the answer is invaluable. But, I have had to step back and take this in two steps (ICND1 and ICND2) and after a couple of attempts I seem to be missing the mark. On a previous test I would make 100% on a number of categories so I would read and re-read the sections the test said I did bad on. Then on my next re-test the center shows that I did bad on what I did well on previously, and then somewhat o.k. on areas that I improved on, leading of course to a just barely failing grade. How are you supposed to learn what to correct if cisco does not let you see what you missed? I have doing my job for the last 18 years in networking and workign with cisco gear for the last 5 years, but all of the sudden I have to be certified and it can affect the outcome of my job. Any suggestions on how to first get cisco to review my past tests to see if there are some kind of errors, and second are there any other good suggestions on how to bone up on this stuff, seeing as I only have the option to read book material and go to websites such as this really great resource. I just re-tested again today and I went back and see two of the sims I had so I know I got them correct. It just makes me wonder how the computerized test is really scored as I have seen posts where the tests have been reviewed in some cases and Cisco made corrections to properly validate the test scores.

Any help is greatly appreciated and my thanks again to 9tut for this aewsome site. It is nice to see that there are places and people out there that truely want to help.

It is sad when hearing yoy failed. Please read the “Share your ICND1 Experience” https://www.9tut.net/icnd1/share-your-icnd1-experience as many candidates share their experience there. And one more thing, pay more attention to lab questions, practice with GNS3 or Packet Tracer if you don’t have real devices.

Best wishes to you in your next exam!

Hi guys, I am new here. Just want to say thanks to everyone here that contributes to help others. I have recently took The global Knowledge ICND1 course and preparing for CCENT. Was curious if someone had the latest dump and could send it to spydermaanz@aol.com.

Thanks

Very enlightening and beneficial to someone whose been out of the circuit for a long time.

– Kris

Hi guys, just passed my ICND1 today with 900 marks thanks to 9tut for this brilliant site.

Preparing for ICND2 now any suggesions guys?

Hi 9tut I already pass the CCNA exam with 974/1000 we are 6 in our company who take the exam and we had an average of 97% thanks for this wonderful site. This is awesome informative and very approacable.

To all who will take the exam ill advice you to down load all the sim exam here and practice with packet tracer. I got 4 sim EIGRP, Access list, VTP and NAT all was identical and found here in 9tut . You may also download the file which indicated below. Almost all the multiple question was also included in this link.

Once again thanks 9TUT and God Bless..

http://www.examcollection.com/cisco/Cisco.TestInside.640-802.v17.14.by.Acme.356q.vce

Hi 9tut

Thanks for the sims and everything, I have passed my CCNA Exam with 923/1000 .

Reading and understanding of knowledge is good, but sometimes in an exam like ccna you need to know what are the questions that will come so that you can manage your time. I had completed my exam in 35 mins..

Thanks once again 9tut .. love u guys

Had this one yesterday.

I also had this one today

Hay i Passed with 860 Today (ICND 1)
This Question was also asked..
Thank You 9tut.

Just pass with 887 mark… this one was there… very good…

Passed ICND1. Stuffs here helped tremendously. Word of caution: Questions were pretty tough and few if them were twisted. Rule of thumb: Do not pick the obvious answer, unless you’re sure of what you’re picking. Off to ICND2 now.

Passed the ICND1 test today with a 874. Just trying to help out others as this site helped me. I had this on my test. It is fairly straight forward. Read each of the questions carefully as I had a couple of different ones but similar in theory. I remembered the last question as “The users in the LAN cannot access the web. What is the cause of the problem?” or something like that and the selection was that the Fast Ethernet interface was admin down. So you would enable the Fast Ethernet interface. Good Luck!

I took the exam yesterday, this sims was in the exam, just as it is here but be ready for new IPs and Subnets with the same commands.

Thanks 9tut.
It is very helpful, your presentation on CCNA. It gives more clear idea on net working. Which help us to resolve the complicated and tricky questions on net working. Particularly ICND1 and ICND2. THANK YOU AGAIN, 9tut. Good ister , Buona Pasqua for all. Wish to you all
Success and confidence for your aim. See you again, Big and Big.

Hello guys, I failed the ICND1 exam again. could you guys please tell me what happen if the NIC is half duplex and the switch full duplex. also what happen if you replace the computer NIC from fast ethernet to gigabit

mdanyy, switch will work on the same speed as the NIC but will failover do half-duplex (applies to scenarios when NIC speed is 10/100Mbps) if NIC spees is 1Gbps or higher the default duplex is = FULL

I take the exam tomorrow; yikes:(

Passed today from riyadh/ksa with 962/1000 missed 2 qts,thanks a tons to 9tut.net,ExamCollection.com,CBT Nuggets by Jeremy Cioara,ICND Modules(1 to 6) from cisco.com and special thanks to Cisco.TestKing.640-822.v2011-04-18.by.AttaullahShahid.513q.vce (Examcollection.com).
Important Advice Subnet Subnet Subnet learn subnetting with practise and try to solve the subnet qts just by looking at the netmask.Now Looking forward to ICND2.

Above Qts was there on my Test

I passed tonight with 975/1000. This question was there. Almost the same one.

i failed today got 787/1000. ..:(

passed today with 920. This testlet was on it. IPs and interfaces are different than shown here but its still the same basic layout. Just learn how it works!

Passed ICND1 today. This simulation was on it. Thanks 9tut. I will donate in a few minutes. I appreciate the site.

I have passed ICND1 today.Got this simulaton-1,2,4,5 questions as it is….

Thanks 9tut..

Folks … Downloaded GNS3 … where do I get the IOS to run on GNS3 … any ideas? Your help is appreciated!

Passed ICND1 today with 962…..This sim was on the exam, IP addresses and interfaces were a little different but it is the same basic idea.

Studied with:
Odom ICND1 Book
Todd Lamle CCNA book
Chris Bryant (thebryantadvantage.com)

Passed ICND1 today..This sim was on the exam. Thanks 9tut!!!!

I passed my test and I got this question on my test. Different IP but the same concept.

Passed recently, same Q w/ diff IPs

Passed ICND1 825 /1000

This sim was on the exam.

Hi, just wondering in Q2, I know the show interface show BW 512Kbps but I thought the actual bandwidth was given by the clock rate configuration on the DCE and not by the bandwidth command.
For example if the clock rate on the DCE is 64Kbps and I run the command ‘bandwidth 512’ on my DTE router serial interface, the show interface command will show bandwidth BW 512 when the actual speed is only 64Kbps..
What do you think ?

Passed today with a score of 862 with 5 mins to spare, I was hoping for a score of over 900 but over the moon all the same. Just have to say that the info on her is gold dust and as long as you study hard, know your stuff and conbine that with going over all the questions on this site plus all question via VCE dumps you’ll be laughing.

Basically all three sims I had were from this site which leads to me think that they know what they’tr talking about. Ninety persent of the questions were either from here or the VCE dumps. There is a lot of subnetting so make sure you are able to do this with your eyes closed.

Studied with ICND1 Official Exam Cert Wendell Odom (a must), videos by Jeremy Ciaora (makes it all seem so easy , hundreds of VCE dumped questions and of course 9tut (amazing).

Good luck all keep going onto ICND2 now!!

sorry left my name out in the previous comment. Just to add make sure you know all the lab sims on this site and know what each command does…this is a MAJOR part of the exam.

@ mdanny If the NIC on a computer is set to half-duplex, and the switch is set to full duplex, the computer won’t be able to communicate with any other device.

With half duplex (HDX), you can transmit and receive, but you can only do one of these at a time i.e. (you’re either transmitting or receiving data, but not both at the same time). With full duplex (FDX), you CAN transmit and receive at the same time. So, having a duplex mismatch will not work.

Hi guys, I just came across this site and it looks perfect as I’m planning to go for my CCNA.
Can someone send me the latest dump(ICND1+ 2) to ?
Thanks in advance

Passed ICND1 and scores 912/1000..Thanks a lot 9tut!

had this question on todays exam. show interfaces serial 0/0 was disabled. it said “command not implemented”

sorry, show controllers serial

Thanks for all … could pass exam with 937… go through 9tut… you’ll get at least 25 same Q.

New year to all the 9tut siders, guys i am looking forward to the retake of my ICND1 exam again. I failed twice, started with the CCNA one exam which i did really bad the second attempt was the ICND1 exam which time was really not on my side. congra to you Milinda anything to expect? if please share guys i now feel like i am getting used to failling i need to break this bond, i am taking my exam on the first week of february over and above i have been on this side almost everyday guys i will share my experience as well to keep the wheel rotating and to everyone who is doing the same guys you are heros.. And we apprecaite the efford you making to help us get there as well. Many thank to every single one of you out there. Vincent

Passed ICND 2 today with a 930. This site helped tons! Be aware there are lots of drag and drop questions about route poison / triggered updates / hold-down timers. Also know how RIP, OSPF, and EIGRP calculate their metric.

I actually had quite a few frame-relay questions regarding map commands and interpreting show command output.

Hardest part for me was looking at diagrams trying to figure out how many routes will go into the routing table without being able to log into any of the equipment, or finding blocked ports with spanning tree.

IPv6 questions we very general; benefits, facts, but no implementation.

Good luck all!

I took ICND 1 in Nov 2011, passed with 900. I was so nervous during that exam that I also paniced my way to failure. Going to take ICND 2 next week, would love to hear specifics from anyone who has taken ICND 2 recently. I feel fairly confident about it, though the time to take the exam makes me nervous.

I have use Packet Tracer and GNS3 when away from home lab, use live equipment at home (4 routers and 4 switches). Although I know not everyone can afford live equipment, I want to warn those who may have taken an exam and failed, THERE IS NO SUBSTITUTE FOR LIVE EQUIPMENT!! I say again, THERE IS NO SUBSTITUTE FOR LIVE EQUIPMENT!!

Packet Tracer and GNS3 behave different than live equipment. I couldn’t imagine attempting these exams without real equipment to mess around with. Also, if you have failed an exam and feel down, cheer up My Friend, get a cheap router from ebay and practice the configs over and over and over until you dream about configuring OSPF, EIGRP, and Frame Relay. Good luck Dudes!

Failed icnd 1 with 787… so sad so bad..really down

Hi Everyone if u want to pass for sure u have to use 9tut and
http://www.examcollection.com/640-822.html also
http://www.subnettingquestions.com/
good luck .:))

Pass ICND1 19th January with 899. This Sim in my exam have got an error. Lab shows diffrent results after commands: show interfaces and show ip interface brief (diffrent status and IP on interface). Questions are the same in Lab Sim.

#show interfaces
Fa0/0 – Up, Up
Fa0/1 – Ad Down, Down
S0/0/0 – Up, Up
S0/0/1 – Ad Down, Down

#show ip interface brief
Fa0/0 – Ad Down, Down
Fa0/1 – Up, Up
S0/0/0 – Ad Down, Down
S0/0/1 – Up, Up

It was great troubleshoot for me, but finally 899 and PASS. Thanks a lot 9tut!

very very nice

Hey all, I had some questions.
1 ) Does issuing the command ‘router rip’ start the RIP process ? This question appeared recently. There was one close option which I selected, that it starts the rip process but no advertisement updating takes place. Please phrase the real question correctly if anyone knows.
2 ) if serial 0/0 is down, line protocol is down(disabled) while we have a duplex mismatch, means one end is half duplex while the other is full duplex, what can we say about that ?
i. no shutdown solves this problem
ii. its a classic case of duplex mismatch.
iii. Cable problem
I don’t remember other options but I selected duplex mismatch.
I think it was serial interface but what will happen in case of duplex mismatch if it was fastethernet interface.
3 ) If all the hubs are replace by switches in a network what does it virtually eliminate ?
i. Broadcast domains
ii. collision domains (I hope its not collisions)
I don’t remember other options. (please bring the question if anyone knows it.)
The question was given with diagram with 4 hubs in a square shaped topology.
Regards,
Glam

seppaku, DON’T GIVE IN MATE I AM GOING FOR A RETAKE ON THE 10/02/12 WHICH IS NEXT FRIDAY, IF I DIDN’T YOU CAN’T BUDDY.

Guys just took the exam today.i failed due to being nervous and really spending too much time re-reading questions. The exam is not hard. Most of the questions are subnetting. The sims are the same as the one on this page with minor changes.

I took ICND2 and failed with 725. Please help me cause I want to pass my exams.
A friend direct me to this website. Pleases if there is any resent dump help me or I will loose my last chances.

e-mail is jjames@datec.com.pg

GOT THIS SIM TODAY FOR ICND1 Exam .GOODLUCK

hey guys im new here..im planning to write complete ccna,any advices or tips

I got this question today. I also failed my test again.

I did not get a lot of subnetting questions today. The last time I did.

passed icnd 1 with 912 yesrterday. thanks to this site.
my advice is to have a good concept before test. some are similar , some are twisted and some are tricky. carefully read wordings.
Try to read all these comments cause it helps you how question are presented.
write Cidr table on your erasable board it helps you identify subnets so u dont waste your time counting from beginings.
good luck guys.

may i knwww wat should i do for my icnd1 exam i m scared of it because i failed once so nw i want to knw which dumsss i should use n wat is the concept going on for exams nw a days n i wanna knw hat the dums opnly come same lyk b4

I passed ICND 1 with 899 score …
,thanks to 9tut and exam collections ;

plz any one can help me with a good concepte on ICND1 or direct me to pass my exam
my email posso6@yahoo.com

practice the questions on 9tut.com, the labs and the implementation sims and understand the concepts. and go to examcollection dot com and download the most recent VCE files and practice all those questions to get real time hands on experience in an exam environment.

Passed ICND1 today using 9tut, this website is amazing had three of the four sims on my exam, Thanks 9tut!

hello! anyone can help me preparing my exam ?
how many lab are there and drop & drop

Got this on the test today, the subnet on Q1 was /29. Also the numbers on the other Q’s were different.

@asghar
try here:
http://www.9tut.net/icnd1/icnd1-security-testlet

is it allowed to use “show ?” on the sims??

from where we can get the pkt file for this sim?

this site is amazing!!!!

I had this question:

Question 5:

The hosts in the LAN are not able to connect to the Internet. Which commands will correct this issue?

It was not s0/0 but the fa0/1 that was administratively shut down (you run “show ip interface brief” no see this interface) but when I ran “show ip interface” to find out the mask for 1st question it was showing fa0/1 as up and protocol up. So be aware of this. I guess cisco don’t attach one question to another or maybe it was just a bug….

i got this lab in exam yesterday

Passed my ICND1 with 960 today, had this question in it 🙂

this is very helpful for my exam……………

passed today this was on it

BTW know your show commands and most of the labs are easy. Know more than just show run because that was disabled on one of my sims

is the FRAME RELAY SIM on the icnd1 exam too??taking test on Wednesday. please feed back with what to expext.. thanx

Taking the exam in a few hours, a bit nervous

Passed on 31 July after two previous attemps. This site helped with the sim questions and the drag and drop questions. Several of the examples here were on the exam with minor changes. I had drag and drop DCHP process, IOS, circuit-ATM-Frame Relay-PSTN and one with random items arp, dhcp, HTTPS….
I didn’t have any sims that required config change or setup, they were all show interface or show run. Also had the security question on Router and Switch, watch for the banner message and passwords.
Read the ICND1 book, this site, subnettingquestions.com and exam collections and you will be fine. Trust me from 3 attempts, you MUST know the material and concept.

Thanks to all here for the input now on the ICND2.

KRR What you say,how to practise for Lab sim?

Going to take ICND 1 and ICND 2

I took this exam today and passed with a 925 score. This Simulation was there, but u need to be careful it wasn’t word for word. for instances my exam had a /29 for the lan interface and my bandwidth size was 16kbit/sec. and my interface fa0/1 was administratively down.

Anonymous:

How did you prepare.Can you guide me?

please tell me how did you practise ?

this lab came into my exam today. and i passed my icnd1. good website to learn. make sure you just dont memories the question. try to understand the concept.

I am new to this site ( just found it) , i think it is great, can someone please tell me how or what i need to buy or turn on or get to use sim and use drag and drop questions, thanks Mic
email——mike.bobinski@yahoo.com

Passed today 912 with 9 minutes to spare. this was there, looking forward to ICND2

This link is dead. I figured you might want to remove it. ICND 1 – ARP Testlet

Hello i know this is not related and i m sorry for this but does anyone know why the CCNA part is down?

Passed today with 950 score. this Q was there..

Scored a 987 today. This sim was on it with 4 questions. Make sure you understand the question and answer, because the exam question is a little different.

Passed today. This question was on it but as Rob says in a slightly different. 4 questions

hey desp_dudecalm down brother. just doaolnwd trainsignal, cbt nuggets and pass4sure pdf 7.58, 7.63 and 7.73 right. and then prepare it from trainsignal and then watch cbt videos ok. go through trainsignal and cbt one more time. then u go through pass4sure pdfs first time. for the first time it will take you 3 days or something to go through each question in detail. now you finish pass4sure 3 to four more times. and then its upto you if you like go for videos once again and finally go through pass4sure the day before the exam. you need 15 days to follow this strategy if you havent done anything. BUT WORK REALLY HARD. AROUND 12 HOURS A DAY. if you like you can reschedule exam date after finishing everything one for the first time. but i tell you if you write on 30th september. thats a great idea.TALHAH

Please where can I download packet tracer to practice for the ICND1. Thank you.

At rob and Chris what was the difference between this and the question in the exam…??pls tel me urgently

Hi Friends, Today i passed with 950 marks, with help from 9tut. This question was there with different values 🙂 So lucky to have this site. Planing to do ICND-2. See you soon !!!!