Show Configuration Sim

Please can someone tell me how to get the packet tracer so as to practise for the ICND1? My email is ruthwalk04@yahoo.com. Thank you. This is really appreciated.

Passed my ICND1 on the 13th with 950 this question was on the Test. Thanks 9tut you guys helped alot.

This was on my ICND1 today but question 3 wasn’t there.

Thanks.

Please fix the (ICND 1 – ARP Testlet) link Thanks!

As far as I know, Packet tracer is available only to the Cisco networkign Academy Student. So if you know someone who has it, you can get it. I do have it but it is exceutable file.

This one was on my test today. Bandwidth was 16 K instead of 512 and Question 3 was not on my test. I wigged out for a second on this question though honestly. I was clicking on the router and couldn’t figure out why I didn’t get a CLI…….needed to click on the console host…..Duh.

I recently passed ICND1 this question was on my test along with
two other sims. The bandwitdth was 1544kb and it did not
ask which interfaces were not configured.

I take my ICND 2 tomorrow at 6:15pm! I will let you guys know what SIMs I run into!

Hey guys, this is another Sim that I had on my ICND 1 test today, it’s still valid.
Question 2 was 512 KBit. I didn’t have question 3. Rest of the question’s where the same ones.
Good luck !

Thanks Sula

Hi, how do you download the .pka files for these sims?

Had my ICND1 today and unfortunately failed with 737. THis question was one of the Sims, but as peviously stated, a 4 question version, without question 3.

got this on the exam today and passed it…

Please I will like anyone who has any training dvd from trainsignal email me at ruthwalk04@yahoo.com.

I took the test and failed with a 724/1000 (passing is 804). It is essential that you know the material and that you understand what you are doing. I am getting there, but this website is a Godsend and has helped me tremendously with explanations after each question!! I am also using Boson and CBT Nuggets. Next test is Monday the 25th. I hope to ace it this time! Good luck to all. Oh, all of the sims I had were on here.

Took the Test today, Sims on this website are legit and appeared in the exam along with that a new drag and drop appeared that was not on any of the dumps that i had reviewed. The Question was something like below and pls review the Private and Public Classes and related subnetting questions. By the Way thanks god i passed the exam in one shot.
ATM – Circuit Switched
VOIP – PSTN
FRAME RELAY – Point to Point
Leased Line – Cell Switched
T1 – Packet Switched

I had this question today on my exam (which I passed with a score of 887). But the last question (#5) was different. I had the same situation only different config. I had a /29 LAN network and the Serial 0/0 was NOT administratively down. It was up up…. I choosed for:
E – Router1(conf)# interface s0/0
Router1(conf-if)# ip address 10.11.12.13 255.255.255.252

All other options (actually none) where vallid… Both needed interfaces where UP/UP.

Hello everyone, preparing for th ICND! exam can someone send me labs ICND1 640-822 at sony_sdc@yahoo.com really appreciate it. thx a lot

failed my ICND1 today with 675 out of 805 passmark. Had most of the sims on this site just wish i had spent some time going throught them. There were many subnetting questions consisting of class B address theory. Alot of security and dhcp as well. Really struggled with the amount of questions in the time frame, ie 50 Q’s in 90 mins… had to rush the last 7 with 3 seconds to spare.

Any latest ICND1 dump ? mohlalenchabeleng@ymail.com

I think this is incorrect – comment below.

Fahad February 23rd, 2013 wrote:

ATM – Circuit Switched
VOIP – PSTN
FRAME RELAY – Point to Point
Leased Line – Cell Switched
T1 – Packet Switched

this is the correct one

ATM- Cell Switched
Frame Relay- Packet switched
PSTN- Circuit switched
Leased Line- Point to Point

Passed today with this sim.

Got this sim on my test today

Took the ICND1 test today 4/26/2013. Passed 950/1000. Questions 1, 2, 4 and 5 were on my test however the IP addresses and masks and of course the answers were different. That is why I stress KNOWING your subjects vice simply trying to memorize questions. I studied:
CCENT/CCNA ICND1 640-822 Official Cert Guide Third Edition by Wendell Odom
Cisco Icnd1 Videos and supplemental materials
CBT nugget videos
CISCO websites regarding CLI commands
and even CCENT cert All in One for Dummies 2010 book

I wanted to ensure all my bases were covered…

Whoever put this together thank you so much!!!

Hi I passed my icnd1 today. Got this question.

Download CBT Nuggets for free. Jeremy is the best CCNA trainer in the world..
http://padegaindia.in/2012/08/ccna-icnd1-icnd2-cbt-nuggets-videos-by-jeremy-free-download/

claudeamavi1@googlemail.com.
please can someone help me for icnd2 exam?
i will do this in jun 7 2013

My first comment here, first of all I just wana thank 9tut for all the hard works. Going to have my exam tomorrow. Will let you guys know how it goes.

Did my ICDN1 today and unfortunately could only score 724.This question was in but with no subnetmask so how do we know what the broadcast address will be.ip almost the same but .15

@Novice

If this question was there with any IP address subnet mask should not be any issue as all you need to see is it /27 or whatever, suppose if you had 192.168.1.15/27 just simply understand that it is class C with 3 bits of subnatting ,

11111111. 11111111. 11111111. 11100000

255 . 255 . 255 . 224

as you know each of them have 8 bits and if you remember the table

128 64 32 16 8 4 2 1

so /27 means subnatting of 3 bits, add 128+64+32 = 224,

your subnet mask will be 255.255.255.224. I hope it should be clear now.

For IP address simply 32-27 = 5 now 2x2x2x2x2 = 32 – 2 = 30, These 30 are useable IP Address of this subnet.

192.168.1.0 will be network address, and 192.168.1.31 will be Broadcast address.

I hope you got my point………..

C Yaaa

@Uzzi,Thks for replying, I get your Point.

I’ve got my CCEnt with a score 850, it’s time for the next step. 9tut were very helpful. Thx……………

Looking to take my ICND1, can I get the new dumb please… email me at sebastianghiu@yahoo.com

Any one send me the .pkt lab sim, Please ?
nah022@yahoo.com

I took the exam July 3rd and had this question, none of the show commands would work and I couldn’t answer any of the questions. I failed because of this question

Some of the show commands does not work in User EXEC Mode. You have to change to Privileged EXEC Mode.

I nailed the exam yesterday with a score of 899 and Question 1 was there

Thanks for your questions, it helped a lot, I just passed ICND1

http://www.9tut.com down…can someone let the admin know.

Thanks for your questions i pass Icnd1 score 812 pass

Passed my ICND1 today with 950 this question was on the Test. Thanks 9tut you guys helped alot.

Did ICND1 today, passed.
This question was on there too.

Passed ICND1 Today. This SIM was on the test.

WHAT A BUNCH OF PUSSIES ASKING FOR DUMPS! JUST READ AND PRACTICE WHAT IS PROVIDED HERE! IF YOU CAN’T FIGURE IT OUT FROM THE MATERIAL POSTED HERE, YOU DON’T DESERVE TO BE IN THE INDUSTRY! YOU WILL FAIL IN THE INDUSTRY IF YOU ONLY STUDY DUMPS AND DON”T UNDERSTAND THE INTERNETWORKING THEORY AND PRACTICE! I DON’T CARE HOW HIGH YOU PASSED THE TEST, YOU WILL FAIL IN THE INDUSTRY!

Pass today with 950.
I had 3 labs: Implementation SIM, RIPv2 SIM and Show Configuration Sim.
https://www.9tut.net/category/icnd1/labsim
Thank ExamCollection and 9tut.

Failed today with 804 points.
Many questions that not on http://www.9tut.com ;-(
For example WAN questions.
Next week next try.

Gud day Sir, just want to ask something about configuration to cable modem connection.. i have speed touch modem then wireless cisco router model lyksys EA 2700 and my switch is dlink.. first i plug in my cisco router to cable modem then router to my switch.. after that my wireless connection is working but my lan connection is not.. is there any configuration i have to do? or my set up was wrong?

Just took the exam today, i got 916, thanks to 9tut, one thing to not do is memorize the questions from abcd, the answers are all over the place. the labs had different ips, so practice through the lab exercises using packet tracer, download the exercises at examcollection and you will do fine. there were only 2 or 3 qu estions that i didnt see and had to do process of elimanation. if anyone needs help hit me up here. Rayray

I need the latest Dumps taking My ICND1 in 1 week please email me @ rob33414@yahoo.com

download latest dumps from
9 t u t . w e e b l y . c o m

inspiring comments 🙂 i will take the CCNA exam this coming sept 26. hope i can pass the exam so i have to read review review… good luck to me 🙂

I sat my ICND1 about 5 weeks ago and failed with a 799 – used the CCENT for Dummies book and Trainsignal videos, which I thought were both very good. So I then bought the Boson Exam Sim Max and spent 2 weeks in Thailand 8-11 hours per day doing the exams in both learning and test modes (scoring 950 average), went to BKK Uni and failed AGAIN with a 762! Admittedly I had a terrible night’s sleep and was just not feeling up to sitting an exam but it was too late to cancel 🙁 Then I remembered this site and will be studying all week next week with the Boson Sim and this site and will hopefully pass. There was an interesting question there about sending an email and the OSI/TCP layers and protocols used…

Did ICND1 on the 6th, passed – thank God. A big thanks to 9tut for all the work here.
I had this SIM, ensure that you understand it well as I got a little confused and it threw me abit.

Hi there i got this in my exams today .i passed 100-101 exam today on 890.
80 % of questions are form exacollections.com.one lab was from OSPF which is a new one .

pass with 930/1000 This was in my exam yesterday and implementation SIM also, and 90% of dump ExamCollection. Thanks 9tut

I passed my exam ICND1 640-822 today and thank you.Looking forward to do the ICND2 in the near future.Thank you 9tut.

Passed today 986.
Used 9tut.net & examcollection.com (spike 119q).
All questions came from spike’s dump and had this sim, no D&D

Forgot to add that I Had 2 new Qs that were not in the dump…
1. What command will add all interfaces to Area 0?
2. What are the benefits of having a single OSPF area?

Thanks 9tut!!!

@CiscoTXUS: what are the answers to the two questions you brought up?
1. What command will add all interfaces to Area 0?
2. What are the benefits of having a single OSPF area?

@noob11111

Answers:

1. The command is network 0.0.0.0 255.255.255.255 area 0

2 Reduced frequency of SPF calculations.
Smaller routing tables
Reduced LSU overhead

I took the ICND1 today 1/29/14 and this sim was on it, I passed…thanks 9Tut

I plan to take the exam at the end of this months. Could you somebody send me the last dump for ICND1. marco.bergo@libero.it

thanks for yopur support and tks for 9tut site

Thanks for helping me pass the CCENT and the CCNA. I have finally gotten some money to donate to your website. This is a great resource. I plan on donating more as I work through some more Cisco exams.

Thanks for the site.

Passed today with 960. The OSPF and the Show Config sims were both on there! Many of the questions from this site are on there and I also used examcollection.com. Verify the comments before downloading the dumps. I also used the Cisco books.

Thank you 9tut. I passed the ICND1 with 930. Also, make sure you know how to subnet class b address.

I passed my exam today. This sim was there. All the answers were same but be very careful guys. My answer for the sim in my exam for question 2 was B. 32 kbit. So please make sure you check before you answer..

All the best. Now time to go for ICND2

I got this sim today but with only four questions and the bandwidth was 32 kbit. Read the questions carefully as some options change like the interfaces. Gud luck

Passed today with a perfect score 1000/1000.
3 sims: OSPF Neighbor Sim \ Show Configuration Sim \ Security Testlet Sim

My advice is study, study, study, learn the material and don’t rely on just passing the test. Cisco is exiting technology just learn it!!

I used:
CBT Nuggets – I watch the entire series once a week for about a month and that really helped me to learn the concepts. Use Google search and YouTube for all your questions.
——-
Boson NetSim 8.0
Cisco Packet Tracer
——-
Cisco.Testkings.100-101.ICND1.v2013-06-27.by.Cristiano.102q
Cisco.Actualtests.100-101.v2013-12-13-.by.Nada.137q
Cisco.Actualtests.100-101.v2014-01-06.by.SUSAN.124q
Cisco.Lead2pass.100-101.v2013-10-04.by.Nada.189q = Spike.119q + Nada.70q
——-
9tut.net – \Labsim – \Security Testlet
-OSPF Neighbor Sim
-Show Configuration Sim
-Security Testlet Sim

Got 986/1000 Marks, {5/16/2014} 50 Questions, Ospf Sim, Security simlet, and Router and switch Simlet Was also there…..All questions From 9tut. and Examcollections…..Now Heading For Icnd2 And Blogging…..

For Any Help.
Manohar Tn
Website: http://www.techlinko.com
G+ : https://plus.google.com/u/0/+ManoharTN9/

I have passed ICDN1 yesterday with 960 points. There were 2 or 3 questions that I have not seen in this website. Regarding to this lab, one weird issue happened to me. When I typed show ip interface, it prompted to me that s0/0 is administratively down/down. However, when I typed show interface s0/0, it prompted to me that s0/0 is up/up. This made me very confused. I am sure that I issued right commands and my vision is good.

Question 5 is wrong. This is the interface on the router connected to the hosts, which would be Fa0/1. no shutdown will bring it up 😉

There was different output from “sho ip int brief” and “sho ip int”. “sho ip int brief” told interfaces are down but “sho ip int ” told that same interfaces are UP.

I took the exam yesterday and this question was there. go thru it correctly all the 5 questions was there

Had this question today. The numbers were different, but consistent with what’s here.

Thanks 9tut, passed my exam today, and this sim was there and same questins

As long as you take your time (I spent about 10 minutes on this alone) and use show ip ospf interface you’ll get this right.

this question was in the exam 19/07/2014

Very good explanation… Made easy!!!

Took my test today, a variation of these 5 sim questions were on there so study this. Used Cisco Press CCENT book, 9tut, and packet tracer to study. Good luck all!

I love this Website.., helped me a lot, i’m giving my exam day-after… gone through some dumps… any suggestions from those who passed?

Could anyone tell me, how many lab sims will they ask in the actual exam…

super-thanks 9tut i lave you 🙂 🙂 🙂 )))))
Question 1:

What is the subnet broadcast address of the LAN connected to Router1?
A – 192.168.136.15
Question 2:

What is the bandwidth on the WAN interface of Router1?
E – 512 Kbit/sec

Question 3:

What interfaces on Router1 have not had any configurations applied? (Choose two)
C – FastEthernet 0/1
F – Serial 0/1
Question 4:

Including the address on the Router1 FastEthernet interface, how many hosts can have IP addresses on the LAN to which Router1 is connected?
A – 6
Answer: A 100%

Question 5:

The hosts in the LAN are not able to connect to the Internet. Which commands will correct this issue?
C – Router1(conf)# interface s0/0
Router1(conf-if)# no shutdown
Answer: C

Get familiar with this question.
There is alot of content missing that is included in the exam but if you understand this context, you should be fine. I got 945.

passed…was in exam.

@sos was the question different or it was exactly the same thanks

Passed today, this sim was in the exam. Questions pretty much similar, different answers depending on the output.

@micky what other exams and lab sims were there’

passed last week this sim was there, similar questions with different answers

Saw this today on ICND1…passed with 973

took the test today and passed with 920.

In my test the IP address is / 29

follows:

1 – What is the broadcast address of LAN subnet connected to Router1?
The interface IP checked in was:

eg 192.168.136.13/29

resp: Letter A

2- What is the bandwidth on the WAN interface of Router1?

resp: 32 kbits / sec

3 What interfaces on Router1 have not had any configurations applied? (Choose two)

Resp:
C – FastEthernet 0/1
F – Serial 0/1

4 Including the address on the Router1 FastEthernet interface, how many hosts can have IP addresses on the LAN to Which Router1 is connected?

A – 6

5- The hosts in the LAN are not able to connect to the Internet. Which commands will correct this issue?

Router1 (conf) # interface s0 / 0
Router1 (conf-if) # no shutdown

@Cles Question number 4 is not 6, it is 14 because we are dealing with /28 and our increment is 16. 16-2=14 we subtracted 2 from 16 because the first one is our network Ip address and the last one is our broadcast IP address. I hope this helps.

Scored 947 today after missing the pass mark by three last week.

This question was there.

What would you say were the essential show commands?

Great site for study! I didn’t book the exam untill I had a pass score on 5 consecutive tests.

I got this one: damn sim had “SHO RUN” and “SHOW IP INT BR” disabled….you HAD to use THE one command they intended.

passed today on first attempt, scored 933
This sim was there with two others sims, the Security testlet and the OSPF Neighbor Sim. Todd Lammle Material was my best tool for preparing this Exam, second i advise everyone seeking to pass this exam to focus on this site also, 9tut is a great site make sure to going and Understand all these questions before taking your exam. For those with android phone, get Certification2go for $1.19 you can at any times studying wherever you are!! Next, INCD2 good luck!!

Please help me , show me how to prepare this exam?

thank you