Share your ICND1 Experience

Pass ICND1 with a 874 today. thanks 9tut for the help.

Passed the ICND1 today with a score of 874 same as Tom.. Thanks to 9tut for the help.. I would STRONGLY, STRONGLY recommend Cisco.PrepKing.640-822.v2012-07-03.by.Cris.346q.VCE if you could find it. I would say about 70% of my test questions came from this one VCE.
– Study all the sims on this site
– Know you subnetting
– Know you sh commands especially “sh inteface” and “sh cdp”
– Know why interfaces cant communicate, (ie. shut down, mismatch protocols, mismatch bandwidth speeds on the NIC/Switch and keepalives)
– Know copy tftp flash, copy flash ftp, if you are copying the IOS to a server or backing up the IOS

Thanks once again 9tut.. See you at ICND2…

@ tyrion lannister.
Ok thanks for clearing up the 180 day sentence on my passing form.
Hope I did not scare anyone too bad.
I just saw that on my sheet and wanted to report.
Having practiced and known ALL the SIM’s before retake , the ICND2 studying is alot easier, because I already figured out the ACL processes , VTP etc.
Thanks Again everyone and especially to 9tut!.

Hi I am looking to see if anyone could point me where to find VCE suite download, i am looking to take my test in a 2 maybe 3 weeks but would like to take a bunch of practice tests. If you have a link can you please email me Pineiro07@yahoo.com also any relevant material that you cant to sen would also be greatly appreciated.

Thanks.

What is multiplexing?
A. The process of breaking streams of packets from applications into blocks of data small enough to send over the network.
B. A system that allows packets travelling between hosts to take a variety of different routes.
C. A system that allows a sending host to specify which application on a destination host receives the packet.
D. Buying a ticket for one movie and using it to watch several movies before leaving the cinema.

**** I think “A” is the correct answer .. is that right ?

What does a socket consist of?
A. An IP address and a port number.
B. An IP address, a transport layer protocol, and a port number.
C. A port number, an IP header, and a payload.
D. An IP address, a MAC address, a transport layer protocol, and a port number.

what answer should be ?? 😐 is it answer A ?

@abed
1st question
it is a signaling term. i see none of the options as correct
http://en.wikipedia.org/wiki/Multiplexing

2nd question
IP and port number, A is correct
http://en.wikipedia.org/wiki/Network_socket

thanks xallax 🙂

Failed a few times, then discovered 9tut passed on Friday with 975. I would advise CBT Nuggets, 9tut and lots of lab sims also learn fast subnetting!

@9tut

what happened to 9tut.com?

I passed the ICND1 Friday the 31st, with a 937 score. I had one problem that I wasn’t sure of. It regards how a switch learns a MAC-address. And how it then floods the ports. All ports or just the one’s it didn’t get the frame from. And whether it learns upon sending or receiving a frame.

I have since read up on the issue and advise you to brush up on the matter also. I purposely did not post what my old or new answer would be. It’s better to find that on your own I think.

Hi Guys, any guidance appreciated: places like exam collection have many ICND1 exams to choose from. How do we go about selecting the best/most relevant exam to help us with study?

hey guys!who knows how many questions and how much time is given to complete the CCENT exam?

Passed ICND1 today at first attempt with 874, so pleased!

50 questions in total and 110 minutes to complete. More than enough time to answer everything carefully.

how many labs questions were there?
i can’t understand 1 thing:several people tell that there is 55Q and 120 min.do they change the number of questions regularly?
what u guys would advice me during exams?which key factors i must consider?

There were 3 lab type questions involving show commands and also 2 or 3 drag and drop type questions. The lab sims and drag and drops on this website are virtually identical. Just make sure you know your stuff and study everything on this site for ICND1. Do as many different practice tests as you can. examcollection.com has got some great free ICND1 practise tests. You can get the program needed to run them on isohunt too! Good luck

@Gal, congrats and thanks for the update and advice. Should we do all the exams on examcollection.com or be selective? If selective do we choose the one with the most ratings? Thanks.

@abed
1st question
Answer is C

2nd question
Answer is B

Got my ICND Next week, can anyone send me the latest dumps pls. turpins71@yahoo.com
thank you

Failed my first attempt at ICND2 yesterday with a score of 804 out of 825, i only had the one sim, it was the VTP one.

thanks every one today i pass my exam….

Hi,Today i wrote my exam.Studied from
CBT Nuggets
Trainsignal Videos
Lots of Youtube videos and wikipedia to know the concepts in detail
9tut.net
and examcollection lead to pass by Daniel and Peyton.

I answered everything properly..i was very happy to see qns – i got only 2 SIMS-quite easy ones..and qns that i have already seen..but when i got the results i got a 799- Grade FAIL- Now what i dont understand is- how did i fail- am so upset because of this.I have opened a case with cisco certification for reevaluation for my exam- one guy ther- i dint understand a word of what he said..but he jus opened a case..and he was like some one wil contact u in 1-2 business days..

Has anyone failed with a score of 799? has anyone applied for revaluation. what is the result of revauation anyone any experience pls share..

Also if there is a charge with the reval…is it better to reval or write the exam again? But what if it happens again..I cross checked all the answers before clicking on NEXT button..

I dont know what went wrong 🙁 🙁 🙁

forgot to add-

practised commands and labs with packet tracer and studied from exam cram book and cisco Icnd1 wendell guide as well..

i dont know what went wrong… any suggestions

Took my ICND1 exam and passed. On to the ICND2 exam. My word of advice: Examcollection and lead to pass helped out a lot. Just know your subnetting questions and study the simulations carefully. I had the Implementation SIM and the Security Testlet. You also want to study ATM/PPP/PSTN/Frame Relay drag and drop. I had another drag and drop on there that was DNS/FTP/TFTP/DHCP/SNMP. But, I think if you study for a couple of weeks and read the ICND 1 Book, you should be fine. It would help to practice the SIMs in packet tracer if you have it too to get comfortable with it.

Just took my test and passed will be donating shortly. If you’re completely new to the field like I was all you need to do is

1. Read and understand the Cisco Press book (google it)
2. Do the practice tests that come with it.
3. Study all the sims and questions here.
4. Go to examcollection.com and download the Daniel Lead2Pass for the 640-822 and go through those questions.

That will be 95% of the EXACT questions on the exam and if you can go through all those without memorizing and just understanding it. There is no way you can’t pass.

Passed ICND1 in the first attempt today with 987 out of 1000 and 30 minutes remaining.
Report says WLAN missed and 0%, but I’m unable to remember which one I missed, rest having 100%
I started with Self Study ::
1. Jeremy Ciora CBT Nuggets Videos
2. Todd Lamele Book
subnetting practice from http://faculty.valleycollege.net/rpowell/jscript/subnet2.htm and http://www.subnettingquestions.com/
and I finished with http://www.9tut.net
I had 8 to 10 Questions from this website, and 1 simulation.
Thanks for such a good website, which helps us face the exam with more surety and confidence.
🙂

Passed ICND1 in the first attempt today with 987 out of 1000 and 30 minutes remaining.
Report says WLAN missed and 0%, but I’m unable to remember which one I missed, rest having 100%
I started with Self Study ::
1. Jeremy Ciora CBT Nuggets Videos
2. Todd Lamele Book
subnetting practice from faculty.valleycollege.net/rpowell/jscript/subnet2.htm and subnettingquestions .com
and I finished with 9tut .net
I had 8 to 10 Questions from this website, and 1 simulation.
Thanks for such a good website, which helps us face the exam with more surety and confidence.
🙂

Took ICND1 yesterday: 962/1000, 50 min remaining.

My test was focused on module 1 of the Cisco CCNA Exploration curriculum. Had the same WLAN result as Shariq, above. I used the Cisco CCNA Exploration online course materials, thorough note taking and review, and online searches of any concepts that required clarification. Used Packet Tracer to be comfortable entering commands, but its best if you have access to actual network equipment. Also, practice binary math, practice, practice, practice.

There were many questions that I didn’t see on this site, but I remember two:

Which class IP address accommodates 66,000+ hosts: (choose one)
a) Class E
b) Class D
c) Class A
d) Class C
e) Class B

Which class IP address allows you to borrow 15 bits for subnetting: (choose one)
a) Class B
b) Class D
c) Class A
d) Class C

Wanted to add:
Had the Implementation SIM, the Show Configuration SIM, and a variation of the ARP testlet.

@HappGoLucky: I failed my CCNA exam 3 times by 10-30 points, and got no love from Cisco. I challenged my score since I failed because of the ACL 2 SIM (2 out of the 3 times). There is more than one possible ACL that fits the required conditions, and I didn’t know about 9tut to find the answer that Cisco expected. Hopefully, your results will be better, just remember be persistent.

Just took icnd1 and pass with a 850 with 30 min to spare, all the sim in here were there just different IP and some new drag and drop question were there and some from here, very good web site for REVIEW.

Which transport layer protocol is used for critical Voice over IP services?

Is it UDP or TCP. Some dumps website are saying answer is UDP, but am reading Lammle he saying you cant use UDP because it doesnt have sequencing for received packets. can someone help explain the correct answer between the two.

Only UDP becouse no sense is tcp.Read book icnd1.

@Rango:
TCP has too much overhead for efficient transmission of data that must be delivered in real time. Also, voice traffic doesn’t need to be sequenced. An occasional dropped packet is not going to ruin the information transmitted. Think of minor static on a radio station broadcast as being equivalent to the worst case scenario with unacknowledged transmission. In the end, you can just ask the other person to repeat his/her self if necessary.

bhn ji in rachnaaon ki prasnhsa ke liyen mere paas shbd hi nahin hai or tlaashne pr mil bhi nahi rahe hai fir bhi badhaai ..akhtar khan akela kota rajsthan

@ HCS01- yeah .. i dint pass- negative feedback from cisco ..

Any tips on writing ICND1 for the second time??? some of the qns wil be repeated again? or wil it be a new set of qns

@Xallax
on the qn asked by abed abt

What does a socket consist of?
A. An IP address and a port number.
B. An IP address, a transport layer protocol, and a port number.
C. A port number, an IP header, and a payload.
D. An IP address, a MAC address, a transport layer protocol, and a port number.

Shouldnt the answer be B- in trainsignal video- bryant says that in the 1st video( i think 1b )..he says it can be represented by 1) ip and port and ip and transport layer protocol and port number

can u pls let me knw the correct answer..thnx

@ HCS01

Which class IP address accommodates 66,000+ hosts: (choose one)
a) Class E
b) Class D
c) Class A
d) Class C
e) Class B

Which class IP address allows you to borrow 15 bits for subnetting: (choose one)
a) Class B
b) Class D
c) Class A
d) Class C

Is the answer for Q1 – class b
and answer for Q2- class A?

passed with 962.. the exam was simmiler to what this website provieds .. i got this Q but with different IP adress,, in Drag & Drop i got DORA, WAN protocols(Frame Relay,ATM,PSTN) and what are DNS,DHCP,ARP,ICMP (make sure that you understand the definations)

also i got the Security Teslet(make sure that you select Bannar choose as one of the choices)

Best luck for every one
🙂

@ mooni-congrats..do u remember the question regarding DNS,ARP ,ICP and DHCP?

@happy
socket is IP:port (i.e.: 174.132.160.58:80)
en.wikipedia.org/wiki/Network_socket

2nd question:
on a class A network you have 8 bits that are always 1 and 24 bits that can be used for subnetting.
there always have to be 2 bits for hosts otherwise the subnet is unusable (cant assign IPs to hosts).

32 bits (total) – 8 (always 1) – 15 (how many we need for this task) = 9 bits

let’s try with a class B network:
32 bits (total) – 16 (first 16 bits can’t be used for subnetting on a class B network) – 15 = 1 bit left
there have to be at least 2 bits left for hosts. the subnet mask now is /31, it would allow only the subnet address and broadcast address to be used on this subnet. impractical.
answer C is correct

Passed 9/23/12 with a 974. This website is awesome and is a great representation of whats on the test. I had the DORA drag and drop, and also the WAN protocol DAD. The security testlet was on there. Chose banner as part of my answers and got 100% in that area. I had lots of subnetting questions, so if you are not comfortable with subnetting, practice. For studying I used this site, cisco (for the subnetting game, and also went through their review questions), and attended a CCNA course at a certified cisco learning partner. Also had the implementation drag and drop. thanks 9tut, on to ICND2. Good luck everyone.

Oh yeah, Packet tracer, packet tracer, packet tracer. It makes you real comfortable with the CLI

Hello, I’ve misunderstood these 2 questions. Please help me !!!
1. which two characteristics describe the access layer of the hierarchical network design model ? choose two
a. Layer 3 support
b. port security
c. redundant component
d. VLANs
e. PoE

Why are the answers A and B ?

2. what are two characteristics of segmenting a network with a router ? ( choose two )
a. a router processes data more quickly than switches.
b. filtering can occur based on layer 3 information .
c. a router decrease the number of collision domains.
d. adding a router to the network decreases latency.
e. broadcasts are not forwarded across the router.

the answers are C and E. I think B and E. cuz router filter based on layer 3 information

One of the methods to which you can find out if you have utrdesnood something completely is if you can teach it to another human without difficulty. The human might be slow in comprehension, that is subjective. but if you delivered it with ease then that means you have utrdesnood the material. Keep it up!

any comments on my questions ?

are the dumps valid for the USA exam

the dumps helped me pass… usa

@kona
for the 2nd qn:
a) A router does increase latency by adding the delay caused by the router examining each packet entirely before sending it on.- so def option A is not the answer

b) IP is a layer 3 protocol-no doubt abt it- but i think this wont be chosen as we need to select 2 best answers –

c) a router decrease the number of collision domains.-maybe in the context of the qn-which asks u to segment a network ( ie) In general, traffic tends to stay within a segment, and less traffic is routed beyond the segment to contend for access to the backbone.

d) adding a router to the network decreases latency- is false as the router has more functionalities and processes to process .(ie) A router does increase latency by adding the delay caused by the router examining each packet entirely before sending it on.

e) Reduced size of broadcast domains: Routers block broadcasts- SO Defitely this is one of the answer

So answer has to be C and E

@ kona- for ur first question

1. which two characteristics describe the access layer of the hierarchical network design model ? choose two
a. Layer 3 support
b. port security
c. redundant component
d. VLANs
e. PoE

We all know that the hierachial model will have 1) ACESS 2)DISTRIBUTION and 3) CORE
Here they have asked abt the Access part alone.

From the definition of Access layer in the Hierachial model- “The access layer is sometimes referred to as the desktop layer. The network resources the workgroup and users needed will be available locally.”

That is , the main purpose of the access layer is to provide a means of connecting devices to the network and controlling which devices are allowed to communicate on the network.

The answers should be PoE and port security- r u sure the options are correct??
See the tabular column in access layer at this link –

http://en.wikipedia.org/wiki/Cisco's_3_Layered_Model

thnx

Which two commands will display the current IP address and basic layer 1 and 2 status of an interface (Choose 2)?

Should be:
-show ip interface
-show protocols

“show controllers” will not show the requested information?

Also i have a doubt:there is a qn with an exhibit asking which 2 characteristic will help u determine if a broadcast storm has occured.

options-giants, no buffer,collisions,ignored and dribble conditions

Ans is No buffer and ignored..

How can we find out that- i searched on google and couldnt come with an explantion .Can anyone help me with this urgently.thnx

Which two commands will display the current IP address and basic layer 1 and 2 status of an interface (Choose 2)?
Should be:
-show ip interface
-show protocols
“show controllers” will not show the requested information?

happy i think that answer is wrong on the dump. show controllers = layer 1 show protocols = layer 3

@ there is no god.

so the answer is show ip int and show protocols right?

yes happy, that is what my research led me to believe. and as far as the no buffer, ignored question, i searched during my icnd1 studies but could not find why. i dont like to just memorize dumps. but there were some questions that i could not find explanations to and i had to accept that i would just have to memorize it. i’m not saying the answer isnt out there, but i was spending too much time trying to find it and i had to move on. enjoy your studies.

yeah me too.i have done videos/and books..i m jus doing dumps to get an idea and to revise

anyidea abt this qn: During the boot sequence – the router needs to locate and load an OS..

options is 1)flash,tftp ,rom
flash,tftp ram
fash ,nvram,tftp
rom,tftp,flash
flash,rom.tftp

I think it first searches the Flash-thats where the IOS image is located
if not found,then backupp device(say tftp server)
and then- here i think it should be RAM.,instead of ROM.

the ans given is option A .. .1)flash,tftp ,rom,

Is tht the correct ans?

yes flash is default location, if device cant find it there, then it checks for a configured tftp server, if no success there, then it will use the basic version of the IOS located in ROM called ROMMON.

Is this site enough to pass ICND1

for show question, I agree with you, Happy go lucky. Show controller is wrong. Answers should be Show IP interface and Show protocol.
I have One more question on this dump.

which IP address class can 15 bits be borrowed to create subnets ?
A. A
B. B
C. C
D. D
E. E

Why is the answer A ? I think it’s B

Xalax has explained this qn on the previous page –
I m writing my exam tomo -this is the 2nd attempt .last time lost by 5 pts ..any advices ,tips or suggestions pls let me know

Also wanted to know if a few qns will be repeating in the reexam or is a new pool of questions -I am planning to buy icnd2 dumps from ciscovce xalax -does it have explanations to all the qns there??

can some one tell me how the ans is this::which command should be used to view how much space has been consumed by NVRAM

options:show nvram
show flash
show version
show running-config
show startup-config

ans:startup-config

Urgent ..thnx

happy i’m start to thing that your using only the dumps. whenever you use 9tut and exam collection you should have all the popular study guides open so you can search the answers that are not clear. thats the only reason that i’m able to answer some of your questions. also run all the commands that you have to choose from in packet tracer. dont just blindly trust the dumps verify the answers. there are a lot wrong answers in the dumps. its fun to be able to identify wrong answers plus its show that you know the topics. enjoy your studies.

its show startup-config because the startup-config file is stored in NVRAM

@rin34
to most of them. you can also mail me to ask further clarification

Is this site enough to pass ICND1? Pls help..

Passed 🙂 It was very easy (i spend only half time to do it) ,if you know all, this site help,but also study subnettingquestion and examcollection daniel dump.
But at first you must learn from book like icnd1 by Odom – this is basic for this.

Passed ICND1 today with 962 at first attempt!! Yay!! Thanks a heap to 9tut.net. Cannot thank enough. This site has helped a lot. Will donate for sure sometime.
Time to bring down ICND2 🙂

Which two commands will display the current IP address and basic Layer 1 and 2 status of an interface? (Chose two)
1) show version
2) show ip interface
3) show protocols
4) show controllers
5) show running-config

in dumps right answers 3 and 4…but I think what 2 and 3. Who can confirm?

today passed with 962.it was an easy exam.70% were dumps from daniel339q.dumps and 9tut helped me to pass

explain please:
Why address 10.1.3.1/25 overlaps with network 10.1.1.0/30? (

Hi Guys,
Yesterday [2nd october] i did my ICND1 and passed with 950 marks. 50 questions were there and passing mark was 804. Got 2 simulation qs and plenty of subnetting also it covered all of aspects, which we should learn regarding ICND1. Please do not memorize Answers specially IPs, since all IPs are different but structure were the same as these questions. Just do your studies perfectly and follow ICND1 questions in “9tut” as well as from “examcollection” site at least twice for better result. Do not hesitate doing studies on this site question as they all are perfectly matching to the exam questions. Also in 9tut, they explain the answers and it is most important thing to understand the nature of question and perfect answers even we never heard before. So i hope all of you guys will do your study well and earn ICND1 certification ! Good Luck !!!!

im going o take ICND 1 on day after tommorow/ Any help???????? thank u very much…

the single most important thing to provide is a clear statement of the sims and simlets that testers see on their exam.. We know the individual questions change frequently, but the sims are fairly stable

Thanks
bunny

thanx 9tut… passed with 937.. most of the questions in 9tut was there..thank u very much

i just did my ICND1 and got 943/1000 thank you

thank you 9tut from nis

Hi, Im from the Uk, Im a 15years old girl, and I took the ICND1 Exam today @3pm, and Passed with the Score 850. I Used Certifyme & Lead2pass! Both R 200% VALID..! All the Questions were from those Dumps..! I also used 9tut.net an subnettingquestions.org , Both were a great resource. I thank Exam collections & 9tut. I also used CBT Nuggets…!

Off 2 ICND2 Noww..!
Good Luck for others…! Dnt Wrry And Tke Yur Time! Yu Must Remember Study The Basics And Use The Dumps..!!

Took it today and Passed 825. No real hard subnetting questions, just need to know your powers of two and address types. Question about IDS on the test along with ins and outs of WAN setup and CSU/DSU questions. Security was also on there a good bit.

Passed ICND1 today! 875/1000.DORA,Labsim that need to use Show CDP neighbors,VCE by Daniel and anonymous was a great help,like everyone else here saying that, study how to compute subnet very well and dont memorize try to understand the Q & A.

Thanks 9tut! I found out that reading the book (Tod Lammle) is not enough.

Good luck to all and of course dont forget to pray!

Just passed ICND1 this morning with 950/1000. Lead2pass, Packet Tracer, and 9tut are very helpful. Thanks to everyone.

wrote my icnd1 on monday and i passe t with 850,thanks to u guys.most of the questions were their…

What is meant by DHCP Overload?

@myself
“NAT overload”?
NAT overload = several LAN devices get to use the same public IP address to access the internet

@myself please use following link
http://www.tcpipguide.com/free/t_DHCPMessageFormat.htm

@xallax, @hakeem
Thanks!
I had that question on CCENT test with multiple choices mentioning NAT/PAT. I cant remember the exact multiple choice answers, but i definitely remember that question. I was confused by the question too. I googled, ask my company’s network team, no one knew.

I have my ICND1 exam November 5th if someone have any useful advice please let me know my email matt31029025@yahoo.co.uk

regards,

Matt

1. Which two characteristics describe the access layer of the hierarchical network design model? (choose two)

a. Layer 3 support
b. port security
c. redundant component
d. VLANs
e. PoE
Answer shows A and B. Is that correct?

November 5th i am doing my ICND1
Any new experience and advices with ICND exams.
I went through CCENT/CCNA ICND1 Official Exam Certification Guide
and CBTnuggets icnd1 and INE CCNA 640-802 Bootcamp
videos, practicing subneting http://subnettingquestions.com/, i was using 9tut website to study simulations, and I used brain dump from Daniel. Anything else???????????????????????
Is that enough for pass???????????

Regards,

@myself
the Access Layer is where PCs, laptops, servers, printers, VoIP phones, etc. connect to the network.
this is where hosts connect so there has to be port security to avoid someone connecting a switch/router and messing up the entire network (B is correct)
VLANs are usually present here to separate traffic by criteria. D is (partially) correct
VoIP phones, PoE wireless switches could get their power over ethernet (that’s what PoE means) which is supplied by the devices at the Access Layer. E is correct.

B, (D), E correct. i’d pick B and E

Someone please comment on this:
Question 1 from the subnetting section..
It says this is right:
“A – Interface fa0/3 has an IP address that overlaps with network 10.1.3.0/30”

But there is no 10.1.3.0/30 network in the exhibit.
Fa0/3 adress is however incorrect for the 10.1.3.128 /25 network…

What do you think of this? If that one isnt correct is it F?
“The IP subnet 10.1.1.0/30 is invalid for a segment with a single server.”

Please help me out!

Thank you for this site it helped me pass my CCENT with 912 a lot of the Question were on the test but not all of them.

it was go for LabSims.

Thank you 9tut i passed my CCENT ICND1 with 860 today

Skogen

Thanks 9tut I assed the exam yesterday.

Passed yesterday with a 937.
My Study Materials:
ICND1 Wendell Odom book
http://www.subnettingquestions.com/
http://www.9tut.net
CertifyMe Peyton dump (100% of my questions were on this dump)
—http://www.examcollection.com/cisco/Cisco.CertifyMe.640-822.v2012-08-29.by.Peyton.357q.vce.file.html

I had the following:
Security Testlet (Choose Banner!! Got a 100% on that section)
Implementation SIM
Show Configuration SIM

Good luck everyone!

thank you 9tut for this great site

How many sims are there?

Passed ICND1 today studied about 2 months. Read Wendell book, CBT and 9 tut. Some of these questions were on there. Some questions threw me maybe 6 choices pick 3 they all seem right. Some questions they all seemed wrong. Some really subtle difference so prepare for it, all and all it was pretty easy if your prepared, time wasn’t an issue, either you know the answer or you don’t take your best shot and move on I took about half The time. This was my first cert test I was prepared to fail so I wasn’t stressed at all I think that helped. 850

passed yesterday with a 962.

WAN drag and drop, i didnt see before made me guessing 😀 be sure to know terms like PSTN, ATM, framerelay, leased line and the kind of WAN technique they use: point-to-point, cell switching, packet switching, or circuit switching…. time was no problem, i used CCENT/CCNA ICND1 from cisco press (the most comprehensive source in my opinion), cbt nuggets, gns3, PT, this great site and VCE dumps. for my icnd2 exam in 2 weeks ill do a lot of lab practice… good luck to all future test takers

btw, this site and vce dumps are still valid!

Hey what is vce dump, congrats on your high score. I need some practice test for ICND2, what is a good source?

Hi guys, im writing my exam on frid da 23rd..so far it has been been me and cbt nuggets training videos, 9tut, examcollections and more subnetting questions
can someboduy help me on this one.

1.How many hosts could you put on each subnet of 1.0.0.0 if you used a mask of 255.25.248.0? How many subnets would you have created?
a) 2048 useable hosts. 8190 subnets
b) 2048 useable hosts. 8192 subnets
c) 2046 useable hosts. 8190 subnets
d) 2048 useable hosts. 8192 subnets

answer: D
I do understand the first portion of useable hosts, but the subnets?? can somebody give clearity on how they got 8192 subnets

@daPhly

1.0.0.0 is a ClassA network which means it has subnet of 255.0.0.0 or /8
subnet 255.255.248.0 has CIDR of /21 so basically it is asked how many such kind of subnets can a claas a network hold. I will do it 21-8 = 13 bits for making subnets, so 2 to the power of 13 is 8192.
NB! usable hosts should be 2046 not 2048

Passed 862, and it took 30minutes.

Cisco Press book. I actually read it.
9tut.com
subnettingquestions.com
gns3 and http://www.routeralley.com/ra/
This VCE (85%): http://www.examcollection.com/cisco/Cisco.CertifyMe.640-822.v2012-08-29.by.Peyton.357q.vce.file.html

You have to learn the concepts. I did subnettingquestions.com every day until I could do the subnetting in my head. I did 100 questions 3 x a day for two weeks with the VCE and made sure I understood why things are right and wrong. I played with routers in GNS3 over and over until it was boring. And I actually read the book cover to cover. It took a month total. You can do it too.