Share your ICND1 Experience

Just passed the exam. Had two sims – VTP and Frame Relay Multinational. Two drag and drops the poison reverse etc. and can’t remember the other one but it’s here on 9tut. About 90% exam from 9tut and Daniel Dump . I used CBT nuggets, Dan’s Courses on youtube, 9tut and Daniel dump.

Thanks 9tut

^^ Was this the ICND1 test or CCNA/ICND2? Isn’t VTP on the latter?

WHAT QUESTIONS WERE INVOLVED IN THE EXAMS ON LAB SIMS AND TEST LETS

HELP US HERE PLEASE

Here is the help you need along with 9tut: https://www.trainsignal.com/Invite/5cff1a
Straight to the point.. Listen the videos for and combined with 9tut. No books needed. One month to prepare for the test.

What is the latest valid dump for 640-822? Can some one please let me know? I am sitting for this Friday.

Thanks in advanced.

helloTindo/mohammad

9tut is best site where i found best question to practice lab sim, but cisco has pool of question and so it is highly recommended to study ccna guide.

I just saw from the Bryant Advantage that the CCNA exam will change in September with a new exam number and everything. He is guessing new topics will be more challenging than before and there will be a lot more IPV6 questions but on the bright side switching is switching and OSPF is OSPF so that will not change.

I passed today the ICND1 640-822 exam, end WOW…. I feel so relieve… I used the CCNA Study guide from Chris Bryant, an excellent instructor BTW. As well as Jeremy Cioara, and youtube videos, The Cisco Learning Network for some practice and of course this GREAT website. It’s very important to go over ALL the practice on this site, as some of the questions reflect on the graduation day.
Feels so good to be a CCENT now. on to the ICND2…. THANKS A LOT 9TUT :))

I passed today 912 at first attempt
CBT Nuggets
VCE file from http://www.examcollections.com (Dumps)

Plz make sure b4 going for exam you have good command over subnetting and router configuraion, security testlet and thats it.
Thanks a lot http://www.9tut.com

THANKS RAKESH GOT AN EXAM SOON,
IW WORK ON IT,

Hey Ali Rizwan and Abe, do u remember wat question were in e exams and e sims and testlets

Hey Ali Rizwan and Abe, do u remember wat question were in e exams and e sims and testlets

Hey Ali Rizwan/Abe

Can u please let us know which sims and security testlets were in the exam?

Passed today with an 862.. 4 labs, 2 drag n drops, make sure you know your commands and subnetting for the labs, it is a must. 9tut, examcollections(vce) and cbt nuggets is all you need. Thank you 9tut.
@Mohammad.. Sim 2 was on the exam and the sim with the security questions.

Passed today 974 points, security sim and implementation sim2 are there. Dont rely on the awnsers though, on the exam everything is different. You need to understand the commands and everything will be fine.

Learning method:

Odom’s book (did every chapter)
VCE for testing and understanding questions
packet tracer and 1 real router and switch for testing purposes. (although only packet tracer is fine)
9tut for sims and understanding

I took the the CCENT Exam on 09 Mar did not pass the 4 labs caught me off guard, which were back to back up front. I was told about 9tut so looking to gain knowledge from this site.

Im sitting on April 6th. So far ive used:
-CBT Nuggets
-Wendell Odom Book
-Bryant Advantage
-9tut
-exam collections
-packet tracer

On the .vce exams ive been averaging 90% correct. How accurate are the dumps? Im trying to gauge where I am on the CCENT materials.

pasted today
9 tut and collection exams

not all questions are correct at collection exam but most are

Passed my ICND1 last week friday, Some new simulations to go through but as long as you go know the course material, you’ll pass! Passed with 912/1000

You guys gets ready for the new cert…Cisco plans to change this exam and ICND 2 by Sept 30 2013. Check this Cisco website for more info

Passed my ICND1 today with a 912. I know people give lots of study advice and try to say “know this question”, but my advice would be to just put in the time. I have a CISSP and Security+; this test was “easier” than the CISSP, but a little tougher than the Sec+. Understand ARP and MAC forwarding and subnetting. Know show commands and CDP and don’t dismiss little things like wireless differences (802.11b vs. 802.11a and the like). Many questions you see here are on the exam in one form or another, but if you simply put in the time and know the basics you will pass. I did about a month of hard studying (Odom Official Cert Guide, practice tests from MANY places including TestKing) and a fair amount of CLI practice. Memorizing to get the cert is fine and good, and most of the time it’s just a fact for any cert, but knowing how to apply what you learn is something you will value. I need to know this stuff in my job! Good luck to all, now on to ICND2, G2700, and a few CEH certs.

The above post was mine, sorry forgot to enter my name!

I just got the mail on the new cert changes. Time to push hard for that ICND2!

http://www.cisco.com/web/learning/certifications/associate/ccna/index.html
Gives some good information about the new cert design.

Heads up Cisco is updating exams. ICND1 and 2 and CCNA will change as of September. So get them done before they add a whole bunch more crap. 🙂

Is this exam only to contain multiple choices and drag& drop?

Oh, I just visited Cisco.com and find out there are 7 question types:
1.multiple-choice single answer
2. multiple-choice multiple answer
3. Drag and Drop
4. Fill in the blank
5. Router Simulation
6. Testlet Question
7. simlet (this is like router simulation but multiple choice)

How do I study for Router simulation??

You either could buy a router which some are very cheap. Or you need to get a simulator. I use packet Tracer

hello Jay
Many Lab practice question are available on 9tut website, select the questions, open with packet tracer and do practice. To solve simlet you should must aware of all command included in CCNA syllabus.

As simple as they seem, I did not see any download links for the ICND1 Packet Tracer files (for the labs). I am pretty much building them on my own anyway, but the download would have been a little helpful. Am I missing where they are posted?

Passed today with 887. Found it easier that I thought. I went it expecting the worst from reading the posts here. Questions were all fine, not much subnetting. Had the Implementation SIM 2 with the 5 routers. 3 Drag & Drops. May I know more that I realise!! Thanks to 9tut – very useful and great to read all the feedback. Onwards to ICND2 after a couple of weeks off! All the best.

How many questions? 50?

Passed my ICND1 today with a 899.
In the exam :

* Show configuration.
* Implementation SIM
* Security testlet.
* Drag and drop : TCP/IP model layer, Frame Relay/ATM/PPP/PSTN, Email/web brower/…,
* and 50 questions in the dump 640-822 Lead2pas.Cisco.640-822.v12.40.386Q. Not study by heart but understand each principle, protocol, subnetting…

All share.

Im taking my CCENT on Tuesday. I have been scoring about 95% to 100% on the 640-822 Lead2pas.Cisco.640-822.v12.40.386Q. What do you think my odds are of passing. I know the theory behind it as well. Ive studied the Wendell Odom book as well as having college classes in cisco fundmentals and cisco routing. We have not taken our switching or WAN class yet but I have learned the switching commands by myself. Thanks for any advice

I Plan to pass my ICND1 next week, I use CCNA in60days Paul Browing and CCENT Study Guide Todd Lammle and some Sim Test, Today i find 9tut.net by searching sim on google.com. Please give me some advices before the Exam day…

John, study the labs

I’ll take my ccent this friday, April 5, 2013. what can i do from today to thurday

I’m about to start studying for my ICND1, any tips on where to begin? I have a very bad habit of memorizing anything i see, mostly unconsiously. So far, i’m using CCNA Second Edition by Todd Lammle from Sybex.com.

.practice questions on
http://www.ciscovce.com

took ICND 1 this morning. passed 962/1000

thanks to all who contributed to this site.

You know you are ready for the test when you are able to find the wrong questions in the dumps.

Good luck all! On to ICND 2

passed this morning with 937. There were a lot of questions from here. Just know your stuff. I still had an hour left so time isn’t a big deal

My ICND1 is for tomorrow morning 9h30 AM… i’ll let’s you my score.

I’ll take my ICND1 tomorrow morning 9h00 AM

I heard the labs have changed. Has anybody seen new labs outside of what is posted on this site?

Labs and Drag & drops where almost identical with some minimal variations.
Used 9tut, CBT, etc.
DONATED to support 9tut, passed ICND1 with 950… ICND in 2 weeks!!!

Took the ICND1 exam this morning 899/1000 Pass, passing score was 804.
Thank to all, for your advices. There some question from here. Working for my CCNA.

I will take it on Friday (12/04/2013) next week. Do I need to consider the new changes made Cisco for my last minute preparations ?

No Taslim ICND1 Exam # 640-822 and ICND2 640-822 will expire on september 30, 2013. Before this date you dont need about the news changes. After this you’ll have the news exams # http://www.cisco.com/web/learning/exams/list.html

Sorry ICND2 = 640-816

Thank you Petuel

Which command would you use to view how much space has been consumed in NVRAM?

A. show NVRAM
B. show flash
C. show version
D. show running-config
E. show startup-config

Not sure which one is the right answer. Can some one tell me ?

In Odem’s book, it says show version can display the total volume of NVRAM but not the used volume

how do I study for my CCNA?

Tasim, the command ” show startup-config” shows the amount of NVRAM consumed because the startup-config is saved in NVRAM

@Taslim The best answer is B. Show Flash this command display the amount of memory consumed by IOS image ( used and available memory ).

Show startup-config display the configuration saved in the NVRAM, but don’t show total, used and avalaible memory. The best answer is B.

This command is used to verify the FLASH Memory available before installing a new IOS image on a ROUTER or A Switch.

Thanks Rakesh and everyone.
I took the ICND1 exam on April 1st and passed with 899/1000
I even missed one Labsim. I thought it was showing how to to this exam.
I though I can go back to questions but I was not allowed. Anyway I study with 640-822 Lead2pas.Cisco.640-822.v12.40.386Q, packet tracer, 9tut.com/net and other web sources.

Big test tomorrow, wish me luck! Will tell you all how I go 😀

Jay, can u share with us that Lead2pas thing with us ?

@Grim
Please do share and let us know about the sims.

Ok had the Security Testlet, Was a bit different but went with the banner login (welcome blah blah) is bad security with the switch and router and got 100% in that,

Had the Wan Drag and drop –
Circuit Switching- PSTN
Packet Switching- Frame Realy
Cell Switching- ATM
Lease Line- point to point

Had the Operations Question 1,

also the Implementation SIM ( show CDP ne and show run to answer it.

will try and think of more.

Used 640-822 Lead2pas.Cisco.640-822.v12.40.386Q (lot of questions from this but make sure you know your stuff enough to know the wrong ones answers in the dump.

CTB nuggets
Wendell Odom Cert Guide
Cisco Ccna in 60 days (paul Browning)
and 9tut 😀

will try and think of more stuff in the test soon.. oh and by the way passed with a score around 910 i think

oh one just pop to mind had the Show Configuration Sim as well

Grim, can u share with this 640-822 Lead2pas.Cisco.640-822.v12.40.386Q

Thanks for the updates Grim. How much wireless did they have?

Dark: jus try Lead2pas.Cisco.640-822.v12.40.386Q in your google and first page you get is all the questions. correct me if i am wrong.

I believe the newest one is: Cisco Lead2Pass 640-822 v2012-12-09 by ICND1 399q.vce

Thanks Shezy, i already found them, first i tried to search like u said : Lead2pas.Cisco.640-822.v12.40.386Q, but no results, and then i tried just “Lead2Pass”

Passed ICND 1 yesterday got a score of 937. I used ICND 1 by wendell Odom and CBT nuggets ICND 1

Can any body tell me how to practice using the above .vce file, I downloaded but I can only practice multiple choice questions. I cannot practice drag and drop, simulations etc. Any advice will be a great help
Thanks

Passed this morning, most of the material on here helps especial the Sims.

Can anyone please help me out with vce crack version? I wanted to check out the dumps but the VCE trial version just shows only 15 question. I also did sooo many unsuccessful google search.. I have an exam next week. Thank you

can anyone plz help me about ICND1 …. which dumps or website should i try for a good result ??????

Passed today with a 950. I used CBTNuggets, Lammle videos, Sybex CCNA book, 9tut, and subnettingquestions.com. I didn’t use any dumps so I can’t comment on that. Most of the question on 9tut where there. Sorry I can’t remember which though. Know your subnetting and basic router commands.

Passed the exam just now. Scored 987 . Pass score was 804. 99% questions came from the dump. Next is icnd2

@emm, I used the dump Cisco.Lead2Pass.640-822.v2012-12-09.by.ICND1.399q.vce

I passed finally, 9TUT was key!!

I would highly recommend downloading GNS3 to setup virtual lab. You can google for IOS (on torrent) versions to input.

Took my exam this morning took me about an hour, the questions here are valid, there was one drag and drop sim I had that wasn’t here. got an 886
There was one sim i messed up on but other than that it was not too bad LOTS and LOTS of subnetting questions on my test LOT!! know your subnetting

@bj – What was the drag and drop sim you got?

I just took the ICND1 test today, unfortunately I did not pass… 775/1000. I personally remember two questions on that that took me by surprise.

Which of the following devices are physical layer devices?
1.) Switch
2.) Router
3.) Hub
4.) NIC Card

The trick to this one was that Hubs are physical layer devices so i did choose this, but I also thought that NIC cards were physical layer devices. We could only choose one.

Another Question i saw that should not have been on the test was supposed to be a ICND2 question where is asked about Router Encapsulation PPP Authentication. I looked everywhere in Odom’s ICND1 and had nothing in there for authentication. I then opened my ICND2 book and found that PPP uses CHAP and PAP for authentication methods. I also remember that it had a LCP as an option in the multiple choice. Has anyone who took the exam had these questions before that I believe should not have been there in the first place?

Taking exam on the 19th got the latest pass2sure as well any tip?

Has anyone gotten any questions on the SDM?

@Brian – Yeah, that PAP and CHAP one is a little out of the scope I think, but I would have gotten it right. Although I am taking my CCENT in about a month, I have been studying for my CCNA at the same time so I will be that much more ready to try and get the ICND2 out of the way before September 30th.

@ Broffredo I personally did not get questions regarding SDM when I took the exam.

@Anonymous – Thanks. Not sue if I have seen any mention of it anywhere here. But they do require you to be able to configure DHCP and NAT using the SDM. Seemed rather straight-forward on CBT.

Passed my icnd1 hour thanks to 9tut.keep up the great job!

Can you please update on the questions please…..

@PPL who took the test recently – Can you pls tell me if tab (auto complete) is enabled in the test or not? I have mine scheduled in a week’s time.

@ Shezy auto tab was in on my end. Know your subnetting i scored 887. Over and over go over the drag and drop dumps on this website as well as Lab sims, wan wireless etc make sure u get 100% on all this website ICND1 questions.

Blessins to you Shezy know you going to make us proud!!!

Passed the ICND 1 with 9XX. Used 9tut, CBTNuggets, Lead2Pass and Lammel’s book. If you know ur stuff u r guaranteed to pass. This site helped a lot. Thanks 9tut.

Can someone please explain to me how they got that answer? Thanks!

http://tinypic.com/r/2d27twy/4

I think I got it.. If it’s PPP then it will show on the config, HDLC does not. Is that correct?

Went to take the test ICND 1 today and freaking Personvue is down for the past two days!!!! 3 nights of cramming with only 4 hrs of sleep. At least I get a few more days. Baby Jesus loves me !!!!! They don’t know when they will be up…

Skibo, same thing here, but i did call and get another test date for monday 29 apr.

They should refund some money for that inconvenience.

@Shows01 what number did you call , I can’t get thru today and yesterday the rep was a total moron. Could not help me at all. She gave me nothing but excuses , caught her in lies, like “Oh the system automatically records your number and info, What info didn’t even give her my name…” But anyway what number did you call

just failed the incd1. 775. only 2 questions i recognized were from the old dump. got a 50 percent on ipv4 and ipv6 addressing which is weird because that’s my strongest subject.

no vtp sim. one question i remember that i hated:

which is the router wan interface:

inside
outside
local
global

???

i thought they were supposed to be inside local; inside global; outside local; and outside global

i had 3 questions on port security. 50 questions. they had some questions (supposedly) that were not counted in the score.

i will post more info after i can look at my results from pearsonvue.

also just remembered there were no drag and drops

hmm… pearsonvue doesn’t show any of the answers to the questions. anybody know where i can see my answer to the test compared to the “correct” answers?

Passed CCENT with 962/1000. Thanks all you guys for the great support
This website is awesome and legit..