Share your ICND2 Experience

@gs ,good luck for your exam ,do let us know what came out during the exam ,thx,it’ll mean a lot to us all thx

I just took and passed my ICND2 exam today. I scored a 973/1000. The $9.00 I spent for the premium membership was definitely a great help. I had the frame relay and OSPF labs on my exam and this website was spot on for both of them. The 50 question quizzes were also a great help. Thanks 9tut for everything.

This is what has the OSPF lab that I had. I got this from another posting on page 17 of this thread.

http://www.dumps4shared.com/wp-content/uploads/2014/07/Latest-Cisco-EnsurePass-ICND2-200-101-Dumps-PDF.pdf

hi does anyone have the latest nada file from examcollection?

@new guy
http://www.examcollection.com/cisco/Cisco.Test-inside.200-101.v2014-02-10.by.Nada.120q.vce.file.html

Passed ICND2 today with 947 in Chicago Had the Frame Relay and OSPF SIMs. Premium membership is worth every penny.

Ipassed congrats , is everything exact same ?

@passedthisweek,was everything still the same…help us out thx

@Charles Filocco,OSPF hotspot questions waht is that ,can u link it here ,pls thx

9tut,can i have your email ?

@Charles: You can send email to support@9tut.net.

@9tut,which is the questions for EIGRP Troubleshooting Sim ? pls help me out

I passed the exam with 960. Everything you need is on 9tut. It is all still Valid. I seen like every question. I knew exactly what to expect. Good Luck.

One thing that is wrong. There is a question that you are required to select 2. But on 9tut. It is only select 1.

@Eire,which question is that mate ??

Passed today in U.S. A score of 89X. 9-TUT still valid. I had Frame relay and OSP Sims. Know the concepts because the SIMS had different answers. As stated by many above. I also had Drag and drops. There was a new drag and drop that I had not seen here. Sorry can’t remember. I agree with Eire assessment above, on the part were there is a question that has 2 answers only 1 answer required on 9-tut. question is below. THANKS 9TUT!!!!!

The following configuration is applied to a Layer 2 Switch:

interface fastethernet 0/4
switchport mode access
switchport port-security
switchport port-security mac-address 0000.1111.1111
switchport port-security maximum 2

What is the result of the above configuration being applied to the switch?

A. A host with a mac address of 0000.1111.1111 and up to two other hosts can connect to FastEthernet 0/4 simultaneously
B. A host with a mac address of 0000.1111.1111 and one other host can connect to FastEthernet 0/4 simultaneously
C. Violating addresses are dropped and no record of the violation is kept
D. The switch can send an SNMP message to the network management station
E. The port is effectively shutdown

The answer is B on 9-tut.
I also selected to send a syslog message or something to that effect.

EDIT on the statement above on the question with 2 answers I also selected. below. so I choose B and D.. not sure if I got it right or not.. Again thanks 9-TUT… Pay the 9 bucks people and you will pass..

D. The switch can send an SNMP message to the network management station

is D. The switch can send an SNMP message to the network management station ………… right or not ??

@9-tut

Pass my icnd2 exam 30 minutes ago… 9tut dumps is all you need. i had frame relay simulation

Hi Guys,
I passed my exam ICND2 yesterday with 960.
I looked at Jermey’s Videos from CBTNuggets and I made notes for every video. I used CISCO Packet tracer to practice after each video which helped me a lot in troubleshooting and learning the syntax.
Although you can pass this exam by just reading the materials on this site, I encourage you not to cram the answers. If you don’t understand something, research and understand the technology. Getting the certification is one thing, having the knowledge is another. Certification will get you the interview but not the job. You need to know your stuff.
The frame relay and EIGRP sims were in my exam along with a few other new questions.
A tip for your exam experience – Visit your test center BEFORE you write your exam and make sure it’s comfortable for you. I had an impossible ball point mouse to work with and it was frustrating especially for the drag and drop questions. They changed it during my exam which made me lost time.
Study Study Study and Practice. All the best guys.

Took exam today.passed.All questions from here only.Thanks 9tut

Hi,
I passed with 947. The questions are still valid. 9tut is great for the exam preparation. Labs were the OSPF and FrameRelay as shown here on the site. Good job here! Thanks a lot.

Passed 200-101 exam on 28/Feb/2016 with 972/1000 marks!

47 questions in total, got 3 new questions on EIGRP, and my Labs were the OSPF and FrameRelay.

No IPv6 VTP or NAT in my 200-101 exam.

@lee Smith,what 3 new questions do u remember ?

I had appeared in CCNA exam and dumps are valid. Prepare OSPF, EIGRP and ACL labs

@Charles

Yes Q4 here https://www.9tut.net/icnd2-200-101/new-icnd2-security

Now says select 2. I selected SNMP.

Good Luck

jst passed icnd2 nw. Framerelay and ospf. No eigrp. Two drag and drops questions. No new questions was there.

@ ken,do you mean ospf hotspot?
Thanks

passed today, everything was from here. only 2 sims. frame relay and ospf hot spot. no IPV6, no ACL, no NAT or VTP, no EIGRP sims, no subnetting. I think i got lucky.

Which is the OSPF hotspot sim on here?

Passed today incd2 ospf hot spot sim is there plus frame relay 2 drag in drops all you need is 9TUT and your good. Pass with a 920 cant complain about that also the NADA 120 dump is the TRUTH trust me when i say that Lets network people…..

just completed 200-101 with 9xx in WA. All 9tut postings here are valid. Had OSPF and Frame Relay hotspots, no NAT, no IPv6, etc. a few Nada stuff in it also. 47 questions, 75 mins to answer. Completed them all in 2/3 of the time. Good luck!

Just passed the CCNA 200-101 test. Thank you 9tut!!! The Frame Relay sim was on there, but names were different. My test was 47 questions. I had two drag and drops the same on here. I did have a few new questions, but I don’t remember them exactly. I’m just happy that I passed. To others reading this if you study and answer the questions on this website you will do fine. I will recommend this site to friends & family. Thanks again 9tut!!!

for those who have taken the exam and remember those new questions that were on the exam that were not 9tut, please post them. It would be very helpful thank you

@GTIVR6 cant you remember the new questions? Atleast how many were there?

Today passed with 974/1000. No new questions, everything is here. 2 drag and drops and OSPF and Frame Relay sim…

@Wowi and @dontmind
Please when you say OSPF sim what sim are you referring to exactly? The one with Boston router to configure or what? thanks

Heard of a drag and drop that had different choices than anything 9tut or any semester in Cisco. Drag choices LMI, DTE, DTC, DLCI, PVC SVC, and CBE. The person asking was our best student in class and absorbs this stuff with ease. Have anyone else had this drag and drop yet? He also said which one is another name for a router?

This site is really legit.
900 proof.
Make sure you know concepts and basic CLI navigation.
Know why the answer is what correct.

Humble thanks 9tut!!

RealDumpzAlwayzM8, is using fake ID, and trying to Astray every body, that’s why he/she did not put total number scored in the test, and also did not provide proper link for valid dumps.

i’ve jst completed CCNA Router and switch nw i m not sure witch one i should do between ccnp router and swtch or ccna security, advice pls

Got a 907/1000 today on the ICND2. Thanks 9tut! Study all the questions here and work through the simulators and you will be just fine.

Passed ICND2 Today with a 947/1000 9tut is amazing. Had OSPF Hot Spot (No config) and Frame Relay Sim – Also Had 1 new EIGRP Question, cant quite remember what it was but understand the concept of EIGRP and you will be fine. Also understand everything just don’t study the answer know how they got to that answer and you will be much better off. Happy Networking people.

I’ve passed ICND2 today 986/1000. Just study the material on 9tut & you’ll be fine. One to be aware of though you’ll need to know the commands to display frame relay map & running config in the frame relay simulator. Good luck everyone.

Well done crosshobbler. How come you didn’t get 1000 though? What did you get wrong?

Thanks Turk, need to sharpen my IP routing skills

Did extremely well today! Got that CCNA! :DDD 9tut is amazing as always. CCENT last year CCNA this year. Dumps from Old Guy in February were spot on, minor name changes and of course answers shook up. I went through all 4 classes through netacad, finished late last year. Being a few months out I was feeling shaky, So I went through those dumps like a madman for 3 days prior to testing. Passed with flying colors!
Note: I had problems downloading that dumps Old Guy posted last month. I copied the extract file name down (Cisco.Test-inside.200-101.v2014-02-10.by.Nada.120q.vce) and put it in google. Lots of mirror sites had the VCE dumps. I highly recommend them.

I just found some helpful answers for preparing for and passing 200-101 exam here:

https://www.quora.com/How-can-I-get-valid-200-101-dumps-for-passing-Cisco-200-101-ICND2-exam

Let us help each other and pass the 200-101 exam easily!

Good Luck!

@9tut…and update with the exam ? pls get to me as soon as u can ,thx

What do you guys think of Red hat? Please point me in the right direction

Anything similar to this for the Wireless CCNA?

Just wanna say this a great site I passed today with a 973.. Just wanna say thanks CCNA Security is next!!

Many of you have mentioned OSPF hotspot SIM in ICND2 exam, is that the same one from ICND1 Sim ?

yes it’s the same

hey guys was the switch sim on there? where u have to set up a switch for access mode, client mode, and set a default gateway on the switch so it can reach the router??

https://www.9tut.net/icnd2/icnd2-labsim/vtp-configuration-sim

gOOD mORNIN
iS this sim on the ICND2??

@9tut, am realy desperate, am sitting for 200-101 this week. kindly assist with the latest dumps.

I was surprised that this dump is still valid! Took my exam yesterday and passed it. Know your stuff and use this dump to practise and you will be fine. I have a feeling Cisco will be updating their questions soon as the dump has been uploaded for a while.

Good Luck to everyone that is looking to be certified

I scored 973 on icdn2 last week, I had frame-relay sim and OSPF Hot spots – 47 questions in total.

Most of the questions in the exam are the same as the one here, maybe on one or two were phrased differently – Anyone looking to take the exam will be ok with this site.

@Duke-o-MonteChristow … these are old sim for 2009 to 2012 exams.
In 2013 CISCO changes its syllabus. So now ICND2 contains only Frame Relay and EIGRP sims only.

Writting my ICND 2 tomorrow,hopefully nothing has changed

got 973.

All from here 9tut.net …expect 2 question different.

1st is drag and drop
I will post those question.

Studied from cbtnuggets thanks to jeremy again…and 9tut.net for practice.

Drag and drop

1) router is this type device
2) the most common type of virtual circuit
3) provide status messages between DTE and DCE devices
4) Identifies the virtual connection between the DTE and the switch

options are

CIR

DCE

DTE

LMI

PVC

SVC

DLCI

answers:

1 — DTE
2 — PVC
3 — LMI
4 — DLCI

What is the result of the above configuration being applied to the switch? (select 2)
A. A host with a mac address of 0000.1111.1111 and up to two other hosts can connect to FastEthernet 0/4 simultaneously
B. A host with a mac address of 0000.1111.1111 and one other host can connect to FastEthernet 0/4 simultaneously
C. Violating addresses are dropped and no record of the violation is kept
D. The switch can send an SNMP message to the network management station
E. The port is effectively shutdown

ans: B and D

@MAyu-Thanks for the update man..So it looks like Cisco has dumbed down the ICND2 cert. The last time like u said 2009-13 they did have the VTP switch config, where u would go in and set the switch as a client and the other as master along with setting the correct domain-name.. along with EIGRP SIM where u went in and set the AU number to 222, because the one router was set to AU 22, and then had to add the x.x.77.x by using the network x.x.77.x command…LOL

Question- On the Frame relay and the EIGRP that are on the test now–are they indeed the ones shown here on 9tut? Do we need to go into privileged mode and configure OR are they just show commands and answer the questions??

WOW I guess a lot of folks were failing the CCNA so they had to dumb it down since 2009. People u need to study and get the basics down it all goes back to your foundation I suggest Chris Bryant vids. Also, u dont want to be known as the weakest link in your office either, because co-workers will ask u if u have a CCNA why are u asking me this? Dont be that guy. Networking is not really hard, takes practice and a good memory. God Bless All!

Refer to the exhibit. When running EIGRP, what is required for Router A to exchange routing updates with Router C?

A. AS numbers must be changed to match on all the routers
B. Loopback interfaces must be configured so a DR is elected
C. The no auto-summary command is needed on Router A and Router C
D. Router B needs to have two network statements, one for each connected network

Correct Answer: A

sorry can’t provide the image for you guys

What are three reasons that an organization with multiple branch offices and roaming users might implement a Cisco VPN solution instead of point-to-point WAN links? (Choose three.)

A. Reduced cost
B. Better throughput
C. Broadband incompatibility
D. Increased security
E. Scalability
F. Reduced latency

Correct Answer: ADE

These were two questions I received from taking the CCNA that were different from 9Tut. I got a 986/1000. Questions from 9Tut will definitely help you for sure but keep these two in mind too just in case.

hey everyone, i am a DUAL CCIE(R&S, SP) instructor, I give online training for CCIE(SP)written and Lab & CCIE(R&S)written and Lab , i have the verified solutions for all the real labs for CCIE SP AND CCIE-R&S which are used by those people who have already passed and are still passing by using them, the training will be 100% genuine as it is already appreciated by people who are currently taking it and took it in the past. Interested candidates can contact at expert.ccie.4133 at gmail.com

practice questions on :
http://www.ciscovce.com

thanks mayu for the update

Anyone have any updates if the Tests changed yet ?

i just gave you an update….

thanks ccna how may sims did you come across, any calculations involved as i’m preparing for the icnd2 exam….any tips, advice i’d appreciate that thanks

@biskit I only had the frame relay sim and ospf hotspot when i took it. The frame relay sim is very similar in terms of questions but the numbers are going to be different so just pay attention to that when taking the test

Let’s do this! Ok I’m nervous now

Are there any configurations for 200-101? Or is it just all show commands? Thanks!

Thanks ccna would there be any subneting or any questions that would require calculations or is this test more troubleshooting??

Adrian with the website you’ve uploaded have you got the pdf???

Took the test today and it’s still valid, only had two sims, GL.

Passed ICND2 on Apr 6 with a 920. Only used this site’s ICND2 to study from. Had question that was posted by Mayu Mar31. Had frame relay sim with numbers being different but same questions. Also had 2 other questions I was not sure about it being on this site. Just make sure you understand these practice questions (theory wise) and you should pass the actual test. I did not even write down the subnet list (forgot) but did not have any subnetting questions. Do all 15 practice quizzes and only allow 3 incorrect question max. My memory is not so good at 55 yrs old but you young folk should have no problem. Thanks 9tut and I’ll see you again in 2 1/2 yrs.

Will there be any overlapping of icnd1 in icnd2 exam …

Will there be any overlapping of icnd1 in icnd2 exam …

Passed ICND2 in early April with a 933. All questions, except for maybe two were not on 9tut. I also watched the CBT Nuggets videos but actually never finished them. Frame Relay sim, EIGRP terminology drag and drop. No ACL, VTP, subnetting, or any configuration of routers and switches. You need to at a minimum know all your basic show commands. You ARE allowed to tab out commands or use shorthand to type them into the sims. One IPv6 question only.

Hi i passed my icnd2 today with a score 920 i found 9tut very useful got frame relay sim. only came across one question on exam which was not on the 9tut site

CONGRATS EVERYONE THAT PASS.

Learn on this site and you are good to go. Thank you 9tut 😀

Can someone send me the latest ICND2 dump? Thanks
pzzza1234 at gmail dot com

Hello ,passed ICND2 today ,got it on the 4th attempt, first 3 times got close and then found 9TUT ,do the quizzes and the sims but most important know RSTP ,FRAME and EIGRP. Many thanks 9TUT ,moving on to Switch and CCNP.

Hello, passed ICND2 today with 973. Thanks to 9tut for help!
Questions were exactly same. Nothing new. From SIMs I’ve got Frame-Relay only.
Spent 20 mins on exam! Good luck everyone!

Hi Epema and anyone passed, what were the commands you used on sims ?

Hi all, passed ICND2 200-101 with 960 (I think I forgot to mark 2 answers in the first Simlet beeing a little nervous in the beginning, maybe I lost the 40 pts there!) at April, 6th in Germany. There were a lot of Drag ‘n Drops, the Dubai-Sim at Barcelona and some RSTP, Frame-Relay and EIGRP questions as on 9tut.
I studied at CISCO academy the CCNA Discovery course and did all the tests there first, having learned some project management and CISCO Do’s and Don’ts also.
Read the Wendell Odom CCNA ICND1+2 100/200-101 text books to understand theory (very important to practice subnetting with the Magic Numbers again and again, so you are able to calculate subnets or summary routes by mind within seconds. This is what saves time in the test or at least in the daily job!! And I used the 9TUT.net and .com as premium member. It’s more than worth the money!!! Most of the questions are on 9tut and at least you really don’t need any other dumps!!! (I spent a lot of money on Pass4Sure dumps, but all that stuff was on 9tut also!!) Believe in 9tut!!
Thank you 9tut!! I will recommend you wherever I’m asked for Cisco Training. And thanks to DansCourses.com for the great and free video tutorials!
You see: here is some training material for lowest price and with best quality!
Thanks 9tut!

@Commands, I used just show run, show ip interfaces brief, show frame-relay map. That’s just it. 🙂

Thanks 9tut!! Pay the 9$! Passed yesterday with a 960 and used this site and reading the comments alone. Kill the composite quizzes and learn the commands and you will be fine.

Hey!!! I passed with 973 thanks to 9tut!!! The exam it was the exactly the same one by one except for one. At this moment Im still dont understand what tha… they want. Its said something like: “what password does routerA should be configured” but you dont have access to that router so I improvised… but I did it in 20min 😀

That was yesterday

Passed exam with 900+ Al Hamdulliha

Passed 4/17/16 with 986/1000. Pay $9 and study. Got Frame Relay, EIGRP, IPv6 and OSPF.
Got 2 new questions i’ve not seen here before. Know your commands.

took test today 4/26/16, passed first time thanks to 9tut.net (icnd 2) scored 947. one frame relay sim and eigrp sim, that it, no ACL or ipv6. Finished exam in 1 HR, Just do the practice exam and you will be very prepared for the exam.

Thank you 9tut , Highly recommended ,Passed today with 973/1000.
got the OSPF & Dubai router framerelay , the only IPV6 question came (IPV6 unicast routing) , and the 9tut dump questions.
Recommendation to pass :
start with CBT nuggets lectures (Jeremy) –> Not every thing covered.
then Go to the dump question try to solve them ( you will find a lot of things you dont know ).
Go to cisco document and just look for the things you didnt know in the dump.
then go back to the dump questions and you will be prepared for the exam.
Thanks again 9TUT