Share your ICND2 Experience

Nawid,
Congratulation for gearing towards CCNP. Could you please send me the latest ICND2 dump. I will be very grateful for your help. Thanks. sheelatul@yahoo dot com

To Mink211,
What do you mean by “questions that Mayu & ccna posted on page 20” ? What is Mayu and what reference of page 20

Page 20 on the forum comments we are on right now.

Here is the link. https://www.9tut.net/icnd2-200-101/share-your-new-icnd2-experience/comment-page-20#comments

Mink, how many drag n drop u get?

https://www.9tut.net/icnd2-200-101/new-icnd2-drag-and-drop-2.. got question 3 and 4

I didn’t the drag and drop may posted buy I would study that 1 as well.

Guys, I need to tell you how it is. I failed my ICDN2 today, test was completely different!!! yes completely DIFFERENT than questions here. I am not sure why there where some questions that totally thru me off MPLS and VPN’ns and such.
9tut.net it seems like cisco already testing people by the new version and you guys still have an old version, please speak up to this.
I knew cisco will change the version on September to v0.3 so I thought I am safe to take exam, but no again question were totally different, I mean I had some question from the ones you here but very few.
So, when I see recent comment from other people here I don’t know even if this is a legit comments.

Well, here the deal. Please read this and be carefull:
old ICDN1 100-101 and new one ICDN1 100-105 old exam end date August, 20 2016
old ICDN2 200-105 and new one ICDN2 200-105 old exam end date September 24 2016
old CCNA R&S 200-125 new one CCNA 200-120 old exam end date August, 20 2016
Obviously I was taking new exam when I was ready for an old exam. So, be aware and don’t make same mistake.
Thank you

Mike Mine Thank you for the heads up! Good Looking out. SOrry about the failure. You should be able to go take the older test right away and not have to wait the 15 days because it is a different version., I wish you luck on the next test and hope you pass it

@Mike Mine …. Sorry about the failure … Which you take 200-101 or 200-105 . I am going to write the exam next week ….. 🙂

Hai.. Is dumps has changed…………… to ICND 2 200-105 ??????

@Mike Mine…. Is all dumps of CCNA ICND 2 has changed ??? Whether you take CCNA ICND 2 200-105 exam instead of ICND 2 200-101 . I

Not knowing which exam one is taking…… who knew that was a thing/possible.

The ICND2 exam and training course have been revised from v2.0 to v3.0. Candidates can choose to take either the 200-101 ICND2 v2.0 exam or 200-105 ICND2 v3.0 exam. The last day to test for the 200-101 ICND1 v2.0 exam will be September 24, 2016.

Many thanks to 9tut, passed the ICND2 exam. Make sure you learn the material, as there were a few new questions, and practise the questions on this site. OSPF hot spot came up, EIGRP and OSPF sims came up too. Good luck to all.

If anyone appeared for icnd2 recently please mention what sims you got in the exam? which ospf sim is coming..is there any need to configure devices or i just need to answer using show commands.

@Mike Mine…….really dude??? I don’t wanna bash but I’m really trying to understand how one does something like that??? I am curious about how you scored though………lol.

hello?
can someone clarify are the questions here still valid? can someone send me the latest dumbs
i will be taking icnd2 next week thanks

I am wondering what sims have been coming up. Someone is saying OSPF, I see the EIGRP SIM, and i know the frame relay sim well. Where is the OSPF simulator on 9 tut? There is one under ICND1.
Thank you

@malio, This is ICND2 (200-101) Site not for CCNA composite (200-120), you are on wrong group.
Please do not confuse to exam candidates by posting wrong information.

@Me also .. Please study this one … https://www.9tut.net/icnd2/icnd2-labsim/ospf-sim#more-54 also if permits take a look towards the OSPF sim on ICND 1 just for reference

Thank you Tim. I am really hoping to get the EIGRP completely understood, and the OSPF, i was hoping for the frame relay question…and hoping to take ICND 200-101 within the next 2 weeks. I did great on My ICND 1 exam, thanks to cbt nuggets, and Tim Lammle book, and Tut.

So what labs are on 200-101 then? I thought it was just EIGRP, Frame Relay, and OSPF Hotspot? Is that other OSPF sim with the config about Boston really on the exam as well?

@Confused … https://www.9tut.net/icnd2/icnd2-labsim/ospf-sim#more-54

@jick Yes, I know about that lab, but where are the questions for it? I think that is just a configuration lab from a prior version of ICND2. I pretty sure from reading past responses, the only sims/labs on 200-101 are EIGRP, Frame-Relay, and OSPF Hotspot. Someone confirm this?

Please any body able to send me the Q&A for the 200-101 exam ?
{email not allowed}

Please any body able to send me the Q&A for the 200-101 exam ?
bluegoal87 at gmail dot com

@confused … Questions only shown once you pay $9 at paytm website … Otherwise it just show only answers ….

@Blue … Study http://www.dumps4shared.com/wp-content/uploads/2014/07/Latest-Cisco-EnsurePass-ICND2-200-101-Dumps-PDF.pdf ….

Please, send me latest a dump (taleb.ite at gmail.com). Wednesday is my exam ICDN2.

pls someone can help me, how to download ICDN2 question. from 9tut. i didnt find the link

I was able to login yesterday but it tells me to contact web admin. can you please look into my account….. username: evosean06

@account issue .. put an e-mail to support(at)9tut.net

I will have my ICND2 tomorrow.

I did study EIGRP, Frame-Relay and OSPF sims. Are VTP and NAT sim still actual and do they appear in the test?

Thank you! Wish me good luck.

@RebelV
Can you please let us know what’s on your test tomorrow? Like if they changed anything.

When I”ll get time I will post about my exam.

!!!!

@RebelV …. Please refer that also – I mean VTP and NAT . Cisco can ask any type of Simulations . .

@RebelV .. How is ur exam .. ?

@RebelV … dear friend , How is ur exam ??

Hai @RebelV .. How is ur exam ????? Is all from 9tut . I am writing the exam this Friday ….

I have my CCNA ICND2 (200-101) in about 2 hours. Wish me luck! I have been doing this for a long time, this is just a re-certification. I have read Todd Lammle’s book and paid the $9 for 9tut.net’s study material. I feel rather confident. I’ll let you know what the outcome is later today! Thanks!

Hi Guys,

What commands are needed for the sims in the exam? Thanks!!

ICND2 Passed today with 960/1000.
Most of the question are from here, but still pay attention some are different.
I got OSPF Hotspot and Frame Relay sim (no EIGRP or OSPF sims).
Got also few Drag and Drop.
I think I got like 4 or 5 questions that were nor here but nothing crazy.
I can only say what have been said so many times. This site is very useful but do not memorize, try to understand the concept behind sims and questions.

Were the sims just different or the multiple choice questions as well? If the multiple choice questions changed, by how much?

Multiple choice question were the same from what I remember just that few of them were new.
Sims are slightly different. Different networks and DLCI for Frame-Relay.
Also answers were different. If you understand the sims and not just memorize you will be ok.

@RebelV
Ok, thanks! One more question. Did the OSPF Hotpot question change, or was it word for word? Sorry for asking all of these questions lol.

OSPF Hotspot was the same.

ICND2 passed today as well. 973/1000. I rather sure the one I missed was the same one that I kept second guessing myself on when I took the 9tut practice ones.

Everything on the test (200-101) was the same as what is on the 9tut.net site. Almost exactly the same on some questions with some exceptions like IP address changes, and frame-relay DLCI mapping IDs. I got the OSPF hotspot simlet, Frame-relay sim, but I didn’t get the EIGRP sim.

There were a couple questions that were not on the 9tut site that are actually on page 20 of these comments. Just read them over, but if you know the material it will be very simple multiple choice, and multiple answer questions.

Just know your material guys/girls. Though studying the material on here could be sufficient to pass the test, however you won’t learn anything if you don’t know what it all means. Just answers will not help you in the real word so learn the material as well. Good luck! Also, if you’re looking for a good study book on the material I can’t recommend Todd Lammle’s books enough! They’re great.

thanks God.. I passed ICND2 today..most of Questions from tut9.. only frame relay troubleshooting..nor OSPF neither Eigrp..
my advice is to study and understand all the concepts..practice with 9tut questions..contact me if u need a help (taleb.ite at gmail.com)

I am writing the exam tomorrow . Any advice to me ?????

Does anyone know if another website like this is for CCNA security? Or any other Cisco certification?

@ Hairless Wookie This might help… http://www.securitytut.com/

i am writing ICND2 200-101
i am writing exam on the 1st of august can any body help me with real dump pls pls pls
i am studying from ensurepass and lead2pass and their practice test valid if not pls help me

u will be highly appreciated for that…………….

@J One :Study http://www.dumps4shared.com/wp-content/uploads/2014/07/Latest-Cisco-EnsurePass-ICND2-200-101-Dumps-PDF.pdf ….

A few questions about ICND2 sims. I had OSPF neighbour sim in ICND1 exam (along with the Show and Security sims).
So is it possible I could still get OSPF, EIGRP and Frame Relay sims for ICND2 exam?
and do VTP config and NAT sims still get tested for ICND2, as no-one seems to be mentioning these anymore?

ICND2 passed today as well. 986/1000 .. All from this Site. Thanks to God and above thanks to GOD

Thanks to 9tut site …

Where is the OSPF Hotspot Sim questions on this site?

I’m sitting the exam in 20 minutes, I will report back! Good luck to anyone sitting today!

passed the exam with 947/1000. you have 75 minutes to complete and must get 825 or higher.
I got the Frame Relay Sim and OSPF HotSpot sims.

Passed today! No ACL, HSRP, VRRP, GLBP or nat. Just some show sims. NO configs.
Thanks 9tut!!!

Took the 200-101 exam yesterday.. scored 920.. All questions were from here.

I pass today with 9xx I had frame-relay sim and OSPF Hot spots

3 new qestion questions
one of Drag and drop

1) router is this type device
2) the most common type of virtual circuit
3) provide status messages between DTE and DCE devices
4) Identifies the virtual connection between the DTE and the switch

options are
CIR
DCE
DTE
LMI
PVC
SVC
DLCI

answers:
1 — DTE
2 — PVC
3 — LMI
4 — DLCI
Just study the material on 9tut & you’ll be fine. And have a look on the comments . Tanks 9tut!!!!!!!!!!!!!!!!!1

Has anyone sat the ICND2 v3 exam using 9tut? Is there a lot of similarities?

Where is the OSPF Hotspot Sim questions on this site, or are there no questions for it?

will be taking the 200-101 exams tomorrow any advice

What is on the OSPF Hotspot sim?

go through the question on icnd2 and u will see the ospf hot spot sim they r talking about

@anon Someone commented on here that they took the ICND2 v3 exam and they failed! They said nothing was on the test from this site. So I presume wording, questions, and sims all differ on the new exam.

@anon. This site caters to ICND1 & 2 V2, NOT V3. You will need to look elsewhere for study material.

200-101 exam will be retired on 24/Sep/2016, then the new 200-105 exam!

And, free 200-105 dumps here: https://drive.google.com/open?id=0B-ob6L_QjGLpUTVNc3otMV8xMkU

@ Swee Puah, Thanks for your kind update on 200-101. Good work on passing the exam. Just few questions please.
1.Can you please confirm the free dumps that you shared from Googledrive, are those new and updated & same as the paid one in Pass Leader ?

2. In preparation, after finishing the full CBT nuggets course, I already gone through 9tut topic quizzes. Currently in the process of doing the simulations: EIGRP, OSPF neighbour & Frame relay sim, followed by: ICND2 exam Composite Quizzes.
I will also go through your pdf PassLeader dump. Anything else that I need to prepare?
3. what were the new questions on EIGRP, if it just normal multi choise no worries but if it is sim or drag and drop pleae let me know.
Please help, appreciated. God Bles.

For anyone who got the EIGRP sim, does the show run command work? what commands did you use for the EIGRP Sim ?

hello i am a premium member and where do i acess the ospf sim.i have an ICND2 in less than 24 hours please help
thanks

” me” click on prime member on top right under your name. on the left you gonna see the labs.

Hi can someone tell me if all the exam questions come from the quizzes ? These are only 50 or so questions but guides are over 200 questions ??? What am I missing here?

Seriously, how much help do some of you people need. Everything you need to pass the exam is here on these pages or provided in dumps as above. Read ALL the questions or even do a bit of studying and then use your own brain to decide what you should know for the exam. You will actually need to use the same brain to convince a future employer that you do actually know what you are doing at some point in the future. Good luck.

hello i have icnd2
exam in the next 3 hrs can someone please post for me then link for the ospf sim

would someone please post a link for ICND2 valid Dump???
I was using examcollection site which was always up to date, but they recently removed Cisco from their content, I emailed them but they said no Cisco anymore in the site.

Anonymous instead of watering time writing all that bs, you could have answered the question I asked!!

I have my exam end of August, please tell me if something / Question / SIM LAB have changed !
Thank you

@Confused Tony! Everything you need to study for your ICND1 and 2 is right here on this site. Just pay 9 bucks and you will have you have access to all that you need. Don’t be cheap. Yes… The questions that are on the actual exams are on this site. Don’t just rely on this site and memorize questions and answers. Study the material, know the material and understand it. Otherwise you will not know what the questions are asking nor the reason for the answers and you will fail. Do the work and earn it….

passed the exam today with 907/1000 the dumps are still valid the sims were frame-relay and ospf

anonymous i did pay for membership. my original question was is the quizzes enough to pass the test or did i need the dumps that had about 200 questions. sorry if it was a difficult question to answer.

@new guy. Well if you payed for the site, you will be fine. You don’t need other dumps if you actually go thru this site, read all the topics to know the material and take all the practice quizzes. Also do the lab sims as well. There are questions that you could get on the exam that are not on this site and that’s where you need to know this stuff if you want to pass. Stop asking for dumps and just freakin study…. I might as well add that if you read thru the posts, you will find that some people are nice enough to post links to dumps they used to supplement their studies. Good luck… You will need it.

Passed My ICND2 200-101 – 987/1000:

Used Cisco Press, Wendell Odom, My own hardware and network experience and 9TUT.

Can’t express enough how important it is to know your subject matter and concepts. These dumps are a great tool, but remember, they won’t be there helping you in your job. Know the logic of troubleshooting and setting up a network.

Thanks 9TUT.

practice questions on http://www.ciscovce.com

Guys , can I find entry level with CCNA if I don’t have experience

It’s going to be extremely hard… Not impossible but companies don’t want to train people, they want you to know so much not just routing and switching but also firewalls, dis, server, trouble shooting , scripting etc. in my opinion if you already in it,do what you have to do to get into networking within. If that means talking to your vp or whoever to make it happen. Good luck

I agree with Michael. it is more difficult to find a job with no experience. You have a good foundation with your CCNA and the experience will come with time as long as you show interest and prove yourself. You will more than likely start from the bottom and work your way up. I’ve been a network engineer for over 10 years doing routing, switching, and wireless LAN controllers. I am just now learning firewalls and working on getting my CCNA as I am preparing to take the ICND2 exam in a month. My advice, continue to learn and keep learning, spend as much time as possible doing lab rather its using packet tracer, GNS3 or real live equipment. (I personally like real live equipment but if funds are not in the budget, I recommend packet tracer.) Good luck to you and wish you the best.

i have a lab setup at work, 2 routers and 3 switches and honestly i don’t even bother cause packet tracer you can literately do everything you can with live equipment.

Yeah. It’s more of a preference. I use both. Doesn’t matter which, as long as you’re using something. Stay with it.

@Confused tony, do you not think it is better to work and learn something yourself so you know what you are doing or have someone spoon feed you and then you end not really having a clue in the real world? Once you understand what I am saying, you will do well. It wasn’t meant as a personal attack on you. Just fed up of the flipping idiots asking to send them dumps and where are the answers, etc., etc

I agree, coming on here and asking for the answers is like going into McDonalds and asking if they know anyone who sells burgers. Open your eyes, use your brain, read everything on this site and pay your $9. This site rocks. Disclaimer, there are plenty of reading materials out there and free you tube videos on every Cisco subject. Use it all, learn and pass your CCNA, its that simple

Ananymous, i am good man.. don’t worry bout me.

thanks to 9tut i am now cisco certified. passed my exam last tuesday with 9xx score thanks guys. if planning to take the exam just concentrate on the dump and other tutorials and u will surely pass.

Test in 2.5 hours!

Thanks 6tut, just passed my ICND2 exam 1000/1000,, the questions were easy, almost everything from here, I used the CBTnuggets videos for Jeremy and 9tut.