Share your ICND2 v3.0 Experience

Does anyone update the “ICNDv3 New Questions” page? Based on what I know and what other people have been saying some of those answers are wrong and should be changed. Can anyone clarify or provide some reference material. Might lead some people astray…

Question 4

Refer to the exhibit. While troubleshooting a switch, you executed the “show interface port-channel 1 etherchannel” command and it returned this output. Which information is provided by the Load value?

Etherchannel_show_interface_port-channel.jpg

A. the percentage of use of the link
B. the preference of the link
C. the session count of the link <— Correct Answer(per Insomnia)
D. the number source-destination pairs on the link <—Current Answer

Question 18

Which two circumstances can cause collision domain issues on VLAN domain? (Choose two)

A. duplex mismatches on Ethernet segments in the same VLAN <—Correct Answer
B. multiple errors on switchport interfaces
C. congestion on the switch inband path <—Current Answer(Incorrect)
D. a failing NIC in an end device
E. an overloaded shared segment <—Correct Answer

Question 35

How can you disable DTP on a switch port?

A. Configure the switch port as a trunk. <—Current Answer(Incorrect)
B. Add an interface on the switch to a channel group.
C. Change the operational mode to static access.
D. Change the administrative mode to access. <—Correct Answer

Question 36

Which Cisco platform can verify ACLs?

A. Cisco Prime Infrastructure
B. Cisco Wireless LAN Controller <—Current Answer(Incorrect)
C. Cisco APIC-EM <—Correct Answer
D. Cisco IOS-XE

Question 37

Which statement about QoS default behavior is true?

A. Ports are untrusted by default. <— Correct Answer
B. VoIP traffic is passed without being tagged.
C. Video traffic is passed with a well-known DSCP value of 46.
D. Packets are classified internally with an environment.
E. Packets that arrive with a tag are untagged at the edge of an administrative domain. <—Current Answer(Incorrect)

Is their any NETFLOW and SYSLOG questions in the ICND2 V3 exam

Hello, has anyone got a link to the CBT ICND2 V3 videos?

CAN ANYONE PLEASE WHICH LABS COME UP IN THE EXAM & WHERE I CAN FIND THEM (THE RIGHT ONES) THANKYOU.

people who took the exam, do you have to configure anything on the exam or just show commands. plzz reply, got exam in couple of weeks. thanks.

Eric, Just show commands. No config to be done at all.

@yoyo Thankyou man

@Eric, I had a couple questions on Proxy ARP which are not here on 9tut so revise that topic also.

Question 4

Refer to the exhibit. While troubleshooting a switch, you executed the “show interface port-channel 1 etherchannel” command and it returned this output. Which information is provided by the Load value?

Etherchannel_show_interface_port-channel.jpg

A. the percentage of use of the link
B. the preference of the link
C. the session count of the link <— Incorrect
D. the number source-destination pairs on the link <—Current Answer (This is the correct Answer)

http://www.cisco.com/c/en/us/support/docs/lan-switching/etherchannel/116385-technote-etherchannel-00.html

@FRANK, thanks for the input.

All other members are also requested to please give your input on this question

anyone have Dave quiz? can you pls share it to me

Thank

Hello, give plz link for last valid dump with simulations.
Best regards!

were the dumps valid from Dumps Help?

are they still vaild? Anyone konws?

Passed Exam 200-105.

I used Materials Provided from SAM to supplement actually studying the materials. I Studied for a week, if I had taken more time to study I know I would have gotten a better mark. But a pass is a pass.

EIGRP, OSPF and GRE Sim was on it.

Few new Multiple Choice, don’t recall what they were.

@FRANK, Congratulations

How did you perform on the new Multiple Choice Questions ?

Were they straight forward or sticky ?

They must be on Cloud, Virtualization, SDN, QoS and BGP. Please share if you recall.

@SAM or anyone else. I took the exam and failed it today. I feel that a lot of dump questions I have been referring to have been incorrect and since I have gone by their answers I am clearly questions incorrect in the actual exam which according to dumps are correct. I want to re-consolidate some questions. Could anyone email me the most valid dumps with corrected answers?

@Anonymous

I took the exam today and passed there some of the wrong answer in the dump also the Sim answers is all different from the dump so u have to do all the show command

@Bann, Congratulations on passing your exam

Could you please share your experience which can help other members to pass the exam.

If you recall any question please do share.

@Anonymous, Sorry to hear, hard luck today, but what happened is a past and you have to move on. I am sure you did learn which areas you have to work. Good Luck

@Bann Yo man. You said the answers were different on sim. Does that mean they have changed the problems, changed it altogether or just muddled up options. Please clarify 😀 cheers.

passed today, no one question but diff. options in sim as mentioned above
sim eigrp pp and ospf, be careful with ospf as no network commands but instead configure ospf under individual interfaces just like ospfv3

some of the questions are def. wrong in dumps but dont know which one
speacial thanks to Dave & Dan

regards

*no new question i meant

passed today with 916, sims answers are different take care to read more than once use the basics commands show running-config, show ip route, show ip interface brief, it is not difficult at all, just one new question… what is the default protocol in wan??use the quiz and the 204 dumps thats all guy, and practice and practice the sims (gre,multilink,ospf, eigr)thank you all and good luck!!!
ppp
hdlc—–>choose this one
frame relay
…
…

@joe, congratulations and thanks for sharing your experience.

Those who passed, could you please tell if you guys got any qus from VRRP GLBP ??

@Joe Please share the Quiz link

I passed my 200-105 exam thank you @william for suggesting me http://braindumpskey.com for exam preparation almost all the questions came from the dumps.

@shadows no problem dude I will share my personal stuffs that I used to pass the test @king sure dude, just give a couple of minutes or something like that, I will share the link soon

I added gre (very basic but useful)simulations but only the first the 3 questions because I can’t configure multilink in packet tracer, hope this will help you, the questions of the dump are the correct based on the comments.

again thank you to EVERYONE who contribute in sharing the sims and the quiz and everything!!

https://www.dropbox.com/sh/rkjy2kr0f75mbd3/AADUWF0iUSaRMeL_MqFGBnaqa?dl=0

@shadows about vrrp and glbp no, not in my test most of it were from the quiz and the dumps that I posted, but probably this questions could be random

@joe, so nice of you, Appreciate your Help.

I must be missing something, where can I specifically find the Q&A just for the 200-105 exam?

@joe did you pass your exam with only that PDF in dropbox that you provided?

Can anyone that has passed within the past week or so share a link to the dump they used for 200-105? There are so many bad ones out there, I want to make sure I get the right one this time, so I don’t have to re-take the test a 3rd time.

Can any one share the pdf of todd lamelle’s ICND2 200 105

pls share me the todd lamelle ICND2 200 105 pdf as soon as possible

@sanjay if you look at the post from Feb 2. Joe reported he passed his ICND2 this week with 916 score, and shared the exact dump he used to pass…. snag it up!

@joe, just wanted to double check. Would you say 90% of the question on the dump you shared is valid? If I only use that, will I pass (outside of the simulation stuff)?

Can someone please confirm what the latest dump is for 200-105. I see the one that @joe just posted, but I also read in the comments Pass Leader is also correct. Please help, I need the right exam, not 500 questions, thanks!!!!!!

@Joe, could I pass with just using the exam you posted above?

@Savy Barons did you actually pass with only that dump, or are you just sharing the new questions?

@Savy Barons, that is for exam 200-125, the entire exam. This is the 200-105 section.

@Savy Barons, several of those answers seem incorrect to me. For example the first question should be A NOT C.

I just passed the exam here’s my score I would like to thanks to http://www.pass4surekey.com/ they have most updated study material.

@Mary, get the sh** out of here, and stop trying to sell your BS material. Let the people on the site judge how good your stuff is.

@SAM

I know it been some time, but if you still have time to send the dump.

{email not allowed}

Thanks!

limitlesscombo88 at gmail

@Savy Barons – You’ve provided many incorrect answers so i’m going to clear it up for people.

NEW QUESTION 584
Refer to the exhibit. You have discovered that computers on the 192 168 10 0/24 network can ping their default gateway, but they cannot connect to any resources on a remote network. Which reason for the problem is most likely true?
Image URL: examgod.com/plimages/aae5d86b7377_13195/passleader-200-125-dumps-5841_3.jpg
A. The 192.168.12 0/24 network is missing from OSPF.
B. The OSPF process ID is incorrect.
C. The OSPF area number is incorrect.
D. An ARP table entry is missing for 192.168.10.0.
E. A VLAN number is incorrect for 192.168.10.0.
Answer: A – Presumably f0/0 on the image is accessing the rest of the network so must be advertised in OSPF
NEW QUESTION 585
If three devices are plugged into one port on a switch and two devices are plugged into a different port, how many collision domains are on the switch?
A. 2
B. 4
C. 5
D. 6
Answer: A – Multiple devices plugged into two physical ports, ie using hub’s. Only 2 collision domains.
NEW QUESTION 586
Which three commands must you enter to create a trunk that allows VLAN 20? (Choose three.)
A. Switch(config-if)#switchport mode dynamic auto
B. Switch(config-if)#switchport mode trunk
C. Switch(config-if)#switchport trunk allowed vlan 20
D. Switch(config-if)#switchport mode dynamic desirable
E. Switch(config-if)#switchport trunk encapsulation dotlq
F. Switch(config-if)#switchport trunk native vlan 20
Answer: BCE – Must be in trunk mode, must allow VLAN 20 and I guess set the encapsulation to 802.1q however it would technically use ISL by default anyway.
NEW QUESTION 587
Which two statements about Ethernet standards are true? (Choose two.)
A. Ethernet is defined by IEEE standard 802.2.
B. Ethernet is defined by IEEE standard 802.3.
C. Ethernet 10BASE-T does not support full-duplex.
D. When an Ethernet network uses CSMA/CD, it terminates transmission as soon as a collision occurs.
E. When an Ethernet network uses CSMA/CA. it terminates transmission as soon as a collision occurs.
Answer: BD – IEEE 802.3 is Ethernet standard and uses CSMA/CD
NEW QUESTION 588
Which three options are types of Layer 2 network attack? (Choose three.)
A. ARP attacks
B. brute force attacks
C. spoofing attacks
D. DDOS attacks
E. VLAN hopping
F. botnet attacks
Answer: ACE – ARP is at layer 2, spoofing MAC address is at layer 2 and VLAN hopping occurs at layer 2.
NEW QUESTION 589
Which three statements about DTP are true? (Choose three.)
A. It is enabled by default.
B. It is a universal protocol.
C. It is a proprietary protocol.
D. It is disabled by default.
E. It is a Layer 3-based protocol.
F. It is a Layer 2-based protocol.
Answer: ACF – Enabled by default, Cisco proprietary and based at layer 2
NEW QUESTION 590
How does a router handle an incoming packet whose destination network is missing from the Routing table?
A. it discards the packet.
B. it broadcasts the packet to each network on the router.
C. it routes the packet to the default route.
D. it broadcasts the packet to each interface on the router.
Answer: C – All unknown destinations will be transmitted to it’s default route. Argument could be made for the correct answer being A as it is unknown whether the router has a default route or not. Damn Cisco and their stupid questions.
NEW QUESTION 591
If you configure syslog messages without specifying the logging trap level, which log messages will the router send?
A. error conditions only
B. warning and error conditions only
C. normal but significant conditions only
D. all levels except debugging
E. informational messages only
Answer: E – Default is just to send level 6 messages, informational.
NEW QUESTION 592
Which feature facilitates the tagging of frames on a specific VLAN?
A. Routing
B. hairpinning
C. switching
D. encapsulation
Answer: D – Encapsulation can tag frames dependent upon source VLAN
NEW QUESTION 593
Which WAN topology provides a direct connection from each site to all other sites on the network?
A. single-homed
B. full mesh
C. point-to-point
D. hub-and-spoke
Answer: B – Full mesh is where every site is directly connected to every other site on the WAN.
NEW QUESTION 594
Which two options are primary responsibilities of the APIC-EM controller? (Choose two.)
A. It automates network actions between different device types.
B. It provides robust asset management.
C. It tracks license usage and Cisco IOS versions.
D. It automates network actions between legacy equipment.
E. It makes network functions programmable.
Answer: AE – It’s used for managing and programming your network so A+E are the best fit here.

Guys, please help out in Answering this question:

Which two statements about TACACS+ are true? (Choose two.)
A. It can run on a UNIX server.
B. It authenticates against the user database on the local device.
C. It is more secure than AAA authentication.
D. It is enabled on Cisco routers by default.
E. It uses a managed database

ANSWER: ??

(My guess is CE)

Seriously, who is the world is going to put in all the effort to read a 623 question dump? That thing needs to be cleaned up REALLY bad. A CCIE dump in only 400 questions.

Does anyone know what ONE dump contains enough of the right answers to pass? I don’t need 623 questions, I just need the right Q&As.

@Joe – Could I pass from only studding the dump you provided?

370 q have not help a lot. 731/1000 lot of new questions
which 2 devices classes can communicate over a serial connection?

Failed the exam 200-105

@failed 200-104, I failed the exam last week as well. I used ccna2ccnp, and it was missing all kinds of stuff, maybe 65% correct. However, if you look just above this chat, Joe submitted a drop box link where he said he passed with a 9xx, and shared the dump he used. When I opened the dump, I realized it was legit, because the last 50 questions on his were not on mine, but I remember seeing multiple of them on the actual exam. I think his dump is around 209 questions, not 600 something like that crazy one above. Also, I noticed a list of 24 other questions posted in this chat that you can add to his dump (just in case). That is the route that I plan to go.

is there any Framerelay Q in the exam ??

@alex, no, I don’t recall any specific questions about Framrelay q in the dumps, or on the exam. However, I do recall some of the answers had framerelay as a choice, so just don’t select it as an answer.

@failed 200-104, that question is in the dropbox link posted above. Here it is…

QUESTION 182
Which device classes are used over serial links
A. DCE
B. DTE
C. LCP
D. HDLC
E. PPP
F. LMI
Correct Answer: AB

@Alex Frame Relay should not be on the exam. It was removed in the latest ICND2 exam objectives.

@shadow, A + E.

I decided to take one for the team and bought a few dumps to see which one out there is most accurate. I tried Transcender/EnsurePass/PassLeader and found that passleader recently released new dumps on the 2nd of Feb with 370 questions in their dump. I bought it and gave it a go in the VCE player and sure enough, looks like they had photos of the actual new exam questions. There’s quite a few new questions on it that im sure everyone here could benefit from.

I’ve made it available on my drive
https://drive.google.com/open?id=0B6v9hvGdm9-PQzRxM2xVa2xPTlU

That’s the PDF version 100% uncut. 370q. I’m taking the exam tomorrow and will let everyone know how well passleader’s new release covers the exam.

which 2 routing protocoles support stub routing?
What is the minimim level of SNMP that provide encryption?
What is the default DTP éode on a switch port?

have you the following question in your Dumps ?

Which statement about HSRP IP address of the device is true ?

What is the drawback of implementing proxy ARP?

@failed 200-104 and @Sammy, I also failed last week, so I know what is in the exam, and I can confirm that all the questions I was missing are in the dropbox link provided by Joe. I don’t think the 370q dumps is needed. I think that is a lazy dump site that’s not removing old info. For example, I just counted 13 questions still on that dump regarding Frame Relay, but FR is NOT in this version of the exam. Here are all the answers to your questions, directly from 209q dump provided by Joe. He just passed with a 900 something.

QUESTION 198 which Routing protocols are compatible with stubs
A. OSPF B. EIGRP C. egp D. Bgp E. IS_IS F. RIP
Correct Answer: AB

QUESTION 196 whats the minimum command to turn on encryption on SNMP?
A. SNMPV3authpriv B. SMNPV3authnopriv C. SNMPV3noauthpriv D. SMNPV2authnopriv E. SNMPV2NOAUTHPRIV F. SNMPV2AUTHNOPRIV
Correct Answer: A

QUESTION 197 Whats DTP’s default in a switch
A. ON B. OFF C. dynamic Desirable D.
Correct Answer: C

QUESTION 199 What about HSRP IP Address is true?
A. if its part of the LAN B. Part of all other networks C. Local to the interface D. Appears in the routing table E. acts as default route for that interface
Correct Answer: E

QUESTION 179 Disadvantages of using proxy ARP:
A. IT rewrite MAC in the database B. It can be used for DDos attack C. D.
Correct Answer: B

@Gideon Thank you very much! Would you mind to post the EnsurePass pdf as well?

@Bob yeah, here’s the Ensurepass dump I have for 200-105
https://drive.google.com/open?id=0B6v9hvGdm9-PS01YOENfdGFGMTA

And the Passleader dump again for anyone reading
https://drive.google.com/open?id=0B6v9hvGdm9-PQzRxM2xVa2xPTlU

I would not recommend transcender dump.

@James I agree, probably not necessary to hit a 370q dump that probably has old questions, but I’d rather have more questions that mentally prepare me than not enough.

Either way, those two dumps I posted are both genuine premium dumps so between those two banks, a passing score should be found.

Please provide, some of here provide some sample packet tracer file,,i have the version 6.0.1 but wont open saying something about compatibilty

https://www.dropbox.com/sh/rkjy2kr0f75mbd3/AADUWF0iUSaRMeL_MqFGBnaqa?dl=0

@James – Thanks very much for sharing these..really appreciate it.

Sorry meant to say.. @Gideon but yeah thanks to James too

@thanks James

@Gideon, Thanks!

Beware, this question on the ENSUREPASS dumps has the wrong answer. (Ensurepass Answer: A) (Joe Dump: D )

QUESTION 12
You enter the show ipv6 route command on an OSPF device and the device displays a
route. Which conclusion can you draw about the environment?
A. OSPF is distributing IPv6 routes to BGP.
B. The router is designated as an ABR.
C. The router is designated as totally stubby.
D. OSPFv3 is in use.
Correct Answer: D

If you give the show ipv6 route command and the device is known to be runnning OSPF and a route shows up, you know that OSPFv3 is in use because only OSPFv3 supports ipv6. There is no information in the question that can even support an answer like A.

Another question on Ensurepass dumps that is not correct (Ensurepass Answer: None) (Joe Dump: D)

QUESTION 7
Which protocol authenticates connected devices before allowing them to access the LAN?
A.
B.
C.
D.
802.1d
802.11
802.1w
802.1x
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:

802.1x a.k.a EAP allows for authentication of devices.

anyone with the latest nuggets for 200-105? or any video for that matter

@Stavros, look on the last page, there was a 209Q dump posted by Joe. He said he used it last week and got a 900 something.

@Gideon, yea there are a bunch of wrong answers in the Ensurepass. I initially only used the ccna2ccnp dump, but I failed and only got a high 600. I’m going to use that same one, plus Joes, and the 24 questions that were posted on this chat a month ago. Hope that prepares me. When are you going to take your exam?

@james – thanks for the response bro, looking for training material before diving into those dumps. something like nuggets infitive or udemy videos…if i can get all that would be great

@Stavros, there a boatload of places to get CBT training… INE, CBT nuggets, Plural Site, Skillsoft, Cisco, ITU, YouTube stuff to name a few…. but I would say the best one out there is Kevin Wallace training, and its cheap.

@Gideon, How did your test go?

@Stavros try Safaribooks online. They have a 10 days trial for their CCNA video ICND v3 from Kevin Wallace. It is full access for 10 days.

Retaking my exam again tomorrow afternoon. Doing my last little bit of prep currently. Still somewhat fuzzy on one question in particular, did we ever come to a solid conclusion on this one:

1) Which component of the Cisco SDN solution serves as the centralized management system?
A. Cisco OpenDaylight
B. Cisco ACI <-Most dumps say this is correct
C. Cisco APIC
D. Cisco IWAN

The question asks "which COMPONENT" which leads me to believe it's the APIC(application policy infrastructure controller) since the ACI(application centric infrastructure) is the entire proprietary Cisco SDN architecture, not just a single part of it. Am I wrong on this? This is one of only a couple questions I was still curious about and when I failed the first time I think it was largely due to Cisco proprietary questions so I want to make sure I have the right answer.

I've primarily used the material on this site to review and prepare so I'll make sure to comment on the end result of my exam and how relevant the info here was overall.

I think it is C.

“The Cisco Application Policy Infrastructure Controller (Cisco APIC) is the unifying point of automation and management for the Application Centric Infrastructure (ACI) fabric. The Cisco APIC provides centralized access to all fabric information, optimizes the application lifecycle for scale and performance, and supports flexible application provisioning across physical and virtual resources.”

Everyone, I passed with high 800 score (almost 900’s) with only two full days of prep with Joe’s dump and going over the simulators here.

Couple notes:
The answers on Joe’s dump and Ensurepass dump vary, and some of them are wrong on both. When reviewing the dumps, keep an eye on questions which dump answers may be wrong. i’d say 90% of the dump answers are right though.

I got hit with all three simulators. GRE, EIGRP, and OSPF. There is a curveball, though. The questions on the exam for the sims are NOT the same. Some are similar, but the problems are different. Make sure you know your stuff. They also have PPP authentication configuration problems in all three simulators on the exam. Again, make sure you know your stuff.

It took me from start to finish: 4 days to do ICND1, and 10 days for ICND2.
My method:
CBT Nuggets courses, do all the labs yourself in GNS3. Get the foundation of understanding for all the topics. Spend 0 time on frame relay, but read up shortly on MPLS.
Do all the 9tut new questions section, and then practice the simulators for the first time.
Do joe’s dump fervently for a couple days.
At the end, refresh your knowledge on early topics covered in the CBT nuggets courses, and then do the simulators a couple times. Do a speedy run through of joe’s dump one last time.
Test out. Do not procrastinate or wait to the last second. If you feel ready, go in early and test out while you’re confident. Don’t second guess the answers in the test center. Commit to the ones you chose to study.

Joe’s dump is 100% for sure has ALL the questions I saw on the exam. The ones at the end of his dump are not entirely polished but those questions are there.

this community needs to solidify the answers, though, and use those dumps.

Gideon, Thanks for coming back and telling us about your experience. Congrats on the pass!

@Giseon, dude CONGTATS!!!! I have gone over a multiple of dumps and can confirm, the Joe dump contained all the questions I saw on my exam last week. I’m going to go back in this week to re-test!

Has anyone seen any Netflow questions?

There are three Netflow questions on @Joe shared file, Check them. But I didnt have any Netflow question in my exam.

passed exam 200-105 today with score 940. thanks for helping.

People who appeared for this exam say the SIMS were OSPF, EIGRP & GRE..

1) How many SIMS (questions) that covered these topics ?
2) Were you asked to make any config changes or show commands only ?

@Matrix, when I took my test I only had two SIMS that required the use of show commands. You only need to use: show run, sho ip int, show ip route.

Fabulous – thanks James.

Has anyone seen a BGP question in the exam?
The dumps I found here do not have any of them.

Did anybody have Frame Relay questions ? Thanks,

on 200-105

No, Frame Relay is NOT on vs.3 exam. Don’t waste your time studying it.

@ALL

Follow up to my previous comment. I just finished my second attempt at the 200-105 exam and PASSED with a score of 976/1000.

I more or less only used the material on this site to prepare and ALL of it is still valid. Got all 3 of the current simulations on my exam(OSPF, EIGRP, GRE)but it was all show commands and the questions/answers were only modified slightly. Study up using what’s on this site and you should be good to go.

Hi everybody. Can anyone share the LATEST dumps, or probably vce, please?

can i ask please any one who pass the test to tell me wich answer is correct for this questions : please

Which part of the PPPoE server configuration contains the information used to assign an IP address to a PPPoE client?
A. virtual-template interface
B. DHCP
C. dialer interface
D. AAA authentication

Which component of the Cisco SDN solution serves as the centralized management system?
A. Cisco OpenDaylight
B. Cisco ACI
C. Cisco APIC
D. Cisco IWAN

Which Cisco platform can verify ACLs?
A. Cisco Prime Infrastructure
B. Cisco Wireless LAN Controller
C. Cisco APIC-EM
D. Cisco IOS-XE

@UrphinJuice Its on the previous page 13 .. Posted by Joe on Feb 2 and Gideon on 7th

@Orbit. Thanks

@please help

Which part of the PPPoE server configuration contains the information used to assign an IP address to a PPPoE client?
A. virtual-template interface <–My Choice
B. DHCP
C. dialer interface
D. AAA authentication

I chose A on the exam. None of my study materials (CBT Nuggets, and Lammle's book) touched on the server config as testable. CBT does provide the server config for use in practicing the client config.

bba-group pppoe PPPoE_Group
virtual-template 1
!
interface FastEthernet0/0
pppoe enable group PPPoE_Group
no shutdown
!
interface Virtual-Template1
ip address 201.5.9.1 255.255.255.0
peer default ip address pool PPPoEClientPool
ppp authentication chap callin
!
ip local pool PPPoEClientPool 201.5.9.100 201.5.9.150

Which component of the Cisco SDN solution serves as the centralized management system?
A. Cisco OpenDaylight
B. Cisco ACI
C. Cisco APIC <–My Choice
D. Cisco IWAN

Taken directly from Cisco's website. “The Cisco Application Policy Infrastructure Controller (Cisco APIC) is the unifying point of automation and management for the Application Centric Infrastructure (ACI) fabric. The Cisco APIC provides centralized access to all fabric information, optimizes the application lifecycle for scale and performance, and supports flexible application provisioning across physical and virtual resources.”

Which Cisco platform can verify ACLs?
A. Cisco Prime Infrastructure
B. Cisco Wireless LAN Controller
C. Cisco APIC-EM <–This is definately the answer
D. Cisco IOS-XE

All three of these questions were on the exam I just took.