Share your ICND2 v3.0 Experience
The new ICND2 200-105 exam has come to replace the old ICND2 200-101 exam. We create the “Share your ICND2 v3.0 Experience” for everyone to share their experience after taking this exam.
Note for ICND2: There are no VRRP, GLBP, NetFlow and NAT questions (and they are not technologies learned in this exam).
Please share with us your experience after taking the ICND2 200-105 exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Did the test today and got 801, most of the questions are the same as here. Got OSPF,EIGRP and GRE SIM with different questions and answers though.
maybe this question has been asked…where do i get the questions, logged on as premium member.
Thanks in advance
hi worried guy ,
1. configure port a a trunk port
I think 2 B. Cisco ACI, and 3. B. wireless lan controller. what did you choose on the exam
@Vlad, that is exactly the answers that I chose, just need to be sure if that is where I was short with my answers.
@worried guy…. were all the questions from 9tut or were there some new questions?
@Worried Guy… for your Question 3… Since one of the ICND2 topics is “4.5 Verify ACLs using the APIC-EM Path Trace ACL analysis tool” I would choose APIC-EM.. 🙂
@Worried Guy… For Question2….
Cisco Application Policy Infrastructure Controller (APIC)
Provides single-click access to all Cisco ACI fabric information, enabling network automation, programmability, and centralized management.
Per Cisco website: https://www.cisco.com/c/en/us/solutions/data-center-virtualization/application-centric-infrastructure/index.html#~stickynav=2
@Worried Guy… For Question 1…
Switchport mode commands that turn off DTP
The DTP negotiation goes off in these situations:
1- switchport nonegotiate
2- Switchport mode access
3- Switchport mode dot1q-tunnel
From that, I would choose option D
Source: https://supportforums.cisco.com/t5/lan-switching-and-routing/switchport-mode-commands-that-turn-off-dtp/td-p/1311800
@Liam, most of the questions are from 9tut.
Worried Guy, i have the exam in two weeks. this exam is kind of tricky.
So,i took my ICND1 today.Failed by about a difference of 130 marks.Sims given here are enough to get them all correct in exam.Just understand the concepts.Sims are almost the same and MCQ’s are somewhat similar to one’s given here on 9tut.A drag and drop on CABLES was there too.
Whocares, do you remmber any of these questions please,
and you said you got drag and drop questions as well ???????????
Whocares, man u said ICND1, we are here talking about ICND2 not 1,
Hey guys! I failed icnd2 today! Please give me the updated dumps! It would be a great help. Please guys! Thanks in advance!
@Ash
Hello Sir , What Kind of Questions , it’s New Questions , Are you read icnd2pdf dump or what ?
what about LAB ?
Is there a frame relay?
@sam Frame Relay Cancel
after I passed ICND 1 , I need some push tp study ICND2 ..no power ):
@Lucas
Can you confirm if the dumps for icnd2 you shared are valid till today ?
Lucas is a spammer , he posted the same message on the ICND1 page with a different name
Someone had mentioned in the EIGRP lab comments section that there was a multi link lab that they were screwed on. Does anyone know about this lab or have seen it on their tests?
Oh wait, maybe they meant it was the GRE Multilink sim?
Also, what is this Frame Relay lab that people have mentioned? I thought Frame Relay was a depreciated technology. Is it on the test? Is it on 9tut?
Also, what is this Frame Relay lab that people have mentioned? I thought Frame Relay was a depreciated technology. Is it on the test? Is it on 9tut?
@Johnny. Nah man, I passed the test very recently and wanted to confirm that there was no frame relay questions. Also, ICND2 PDF is legit but Im hard pressed to say that it alone will get you a pass. I had to take the test more than once and the I didnt use 9tut at first so I knew the material pretty well and failed by a close margin. Im saying this because the ICND pdf is what got me over that hump.
Anyone have SY0-401 Security+ dump by chance? Thanks!
Hi @Anonymous , so you are saying ICND2.pdf is still valid? But what about the sim? The configuration is changed in real exam as given(sim with answer) in 9tut and answer is different, right?
Passed my ICND2 exam today got 910 after a re-seat
9tut materials was enough for me to pass the exam.
Worried Guy: when you say 9tut material , you mean the Q/A under 200-105 tab on the right and the Q/A under the Welcome premium member tab?
Hi,,,i passed my ICND2 today…9tut questions were about 37 out of 47 questions… the other 10 questions were in PDF… and the 3 sims were same as here. GRE OSPF and EIGRP… config is diff but questions are same… know ur commands and u will be good…
my advice and i only passed on 2nd try…
study sims here…. easy marks if u know ur commands….
study all questions on 9tut and PDF….alot of questions overlap….so its not as daunting as u think….
I am a premium member and I didn’t see a PDF2, could somebody point me in the right direction. Going to be retaking test soon.
@ Worried Guy
congratulation, you are not worried guy any more
Can anybody let me know what SIM answers you got on the exam??
hi everyone!! ill be having my exam by the end of the month. Can you please send me the latest dumps following two dumps ? Dipen**6*0*8*5*@ *gmail*com(please remove “*”) thank you all so much Godbless
Cisco Premium 100-105 by VCEplus 370q
Cisco Premium 200-105 by VCEplus 571q
@Lackadaisical,
I had the exact same sims and questions on my test. Also, I would say that probably 75% of the questions on the icnd2pdf were on my test. Memorize some SHOW commands for the sims and you should be able to pass. Just know what to look for when you do SHOW commands, Like different OSPF automomous numbers between two routers and such. Or are the default Hello timers the same or different. Real easy stuff.
How have valid dump 100-105 Please help me :(((( PLEaseeee
give link
Hi All,
Was there a questions on ACL in 200-105(ICND 2)?
Studying ACL is important to pass?
Thanks in advise..
@Jordan
You have ICDN1 dump ? 100-105
Where can i found the pdf dump for ICND2(200-105)
I have ICND2(200-105) valid but you also faund me valid 100-105
2Diana, I just passed ICND1 I have dumps. DO you have ICND2 dumps? If you send me those. I can send you mine
@Atta OK good say witch link where I found 100-105 dump ?after say you mail i send you or give here link
Hi all here Good luck everyone
Who know 100-105 dump witch is valid ?
Diana: send me you email address
@Atta It is my email adress take >>
nikolayevnadiana at mail dot ru
I am waiting
@Atta It is valid ? 100 % I fail twice time :((( Iam money finish :(( For me this exam very importantt
@Diana, I suggest that you look on the ICND1 thread for the new questions and drag and drop. You may also look for Jolie’s dump as 30-40% is included on the exam
@R thans very much but now Jolie’s dump Invalid :(((
@Atta you here ? :((
@James may you give you account for give here exam ?
@Diana: I have sent you dumps yesterday
@Atta my mail hack :((
but I write you from sister mail please see here and send me again :(((
I send mail to ayesha*iqbal*asha @ g m a i l . com ( replace * with . )
Diana i have sent you latest dumps at your email address please download and used that is most useful i passed ICND1 with that dumps but you also should learn and understand basics then you will passed easily.
@Ahmed: DO you have 200-105 dumps? Will you kindly send me that?
QUESTION 9
Which two circumstances can cause collision domain issues on VLAN domain? (Choose two.)
A. duplex mismatches on Ethernet segments in the same VLAN
B. multiple errors on switchport interfaces
C. congestion on the switch inband path
D. an overloaded shared segment
E. A failing NIC in an end device.
Correct Answer: A C
But this is from cisco.com
“If problems only occur on that collision domain, and the performance of other collision domains in the same VLAN is normal, then look at the port counters on the switch to determine what troubles this segment may be experiencing. Most likely, the cause is simple, such as a duplex mismatch. Another, less frequent cause is an overloaded or oversubscribed segment.”
WOULDN’T THE ANSWER BE A AND D?
please help with the following questions
How can you disable DTP on a switch port?
A. Configure the switch port as a trunk.
B. Add an interface on the switch to a channel group.
C. Change the operational mode to static access.
D. Change the administrative mode to access.
Question 2
Which component of the Cisco SDN solution serves as the centralized management system?
A. Cisco OpenDaylight
B. Cisco ACI
C. Cisco APIC
D. Cisco IWAN
Question 3
Which Cisco platform can verify ACLs?
A. Cisco Prime Infrastructure
B. Cisco Wireless LAN Controller
C. Cisco APIC-EM
D. Cisco IOS-XE
why people is speaking about 100-105 here if is just for 200-105 fórum?Please move your comments to the other fórum,cause are confusing
ATTA what is your email ID ?
worried guy, which pdf file did you use please
QUESTION 9
Which two circumstances can cause collision domain issues on VLAN domain? (Choose two.)
A. duplex mismatches on Ethernet segments in the same VLAN
B. multiple errors on switchport interfaces
C. congestion on the switch inband path
D. an overloaded shared segment
E. A failing NIC in an end device.
Correct Answer: A C
But this is from cisco.com
“If problems only occur on that collision domain, and the performance of other collision domains in the same VLAN is normal, then look at the port counters on the switch to determine what troubles this segment may be experiencing. Most likely, the cause is simple, such as a duplex mismatch. Another, less frequent cause is an overloaded or oversubscribed segment.”
WOULDN’T THE ANSWER BE A AND D?
Where can I get the latest PDF or VCE for ICND2? Does anyone have a link or the ability to email it to me?
Thanks to anyone that can help!
mabenaustin at yahoo dot com
Hello Guy, Does anybody have ICND2 dumps? Cant you share the link here? Thanks
@Prasanth wich one of EIGRP lab did u have?I could see two labs.thanks in advance
Recently, I will ask the person who received ICND 2
Did you have a drag and drop question?
It is another question.
Is there NetFlow?
Does anyone have the VCE player that’s free? link please?
Above is fake, this people cant even study for CCNA
hey can anybody please let me know the new sim answers and questions? please and thanks and also if any new questions came up please provide!
Hello Guy, Does anybody have ICND2 dumps? Cant you share the link here? Thanks
Passed today 402 q is still valid.OSPF,GRE,EIGRP labs. good luck guys
Paco, where is the 402q? Please assist.
@Paco is it the ICND2?
@vince I saw some people hung on this fórum.I bought it in passleader
@ Right is ICND2
@Paco, would you mind sharing your 402 q?
@R you can download it at passleader
@paco, what are you saying about hung on this forum?
QUESTION 9
Which two circumstances can cause collision domain issues on VLAN domain? (Choose two.)
A. duplex mismatches on Ethernet segments in the same VLAN
B. multiple errors on switchport interfaces
C. congestion on the switch inband path
D. an overloaded shared segment
E. A failing NIC in an end device.
Correct Answer: A C
But this is from cisco.com
“If problems only occur on that collision domain, and the performance of other collision domains in the same VLAN is normal, then look at the port counters on the switch to determine what troubles this segment may be experiencing. Most likely, the cause is simple, such as a duplex mismatch. Another, less frequent cause is an overloaded or oversubscribed segment.”
WOULDN’T THE ANSWER BE A AND D?
@ Johnny
You’re right A and D are corrects
https://www.cisco.com/c/en/us/support/docs/lan-switching/virtual-lans-vlan-trunking-protocol-vlans-vtp/23637-slow-int-vlan-connect.html
@Tomcat: thank you! Can you help answer me this question or anyone:
How can you disable DTP on a switch port?
A. Configure the switch port as a trunk.
B. Add an interface on the switch to a channel group.
C. Change the operational mode to static access
D. Change the administrative mode to access
Wouldn’t the answer be D? Because when you ‘show int’ it says trunking mode: off, but 9tut says answer is A, but that is only part of the answer. Can anyone clarify, please and thank you!
Would you post the latest Dumps here pls?
@ Johnny
The correct answer is D
I had this question in my exam
Some questions has wrong answers
This link in whatsup fake group please don’t join anybody time wasted .
Just took ICND 2 exam yesterday. Hit 750’s. Failed. New questions, though I didn’t get any sims except hot spot questions.
@sun None of the icnd2.pdf questions showed up?
@Tim – I made a mistake. About 60 maybe 70% of the .pdf questions showed up. Some are worded differently and are in different slots, e.g. Answer C will be in Answer D’s spot while D is in C’s spot, so basically the answers are randomized and not in the same arrangement as the .PDF. Also, I made the mistake of not visiting this site before taking my test as I was not aware the LabSim questions are different. I thought they were hotspot questions,but i guess they are labs, but they were multiple choice with sh run, show ip int brief, and show ospf neigh commands. No actual labs as in assigning IP addresses or setting network commands, just basically running show commands and looking for the answers. Again, I was not made aware the answers are the same answers seen on labs but different choices, E.G. LabSim 1’s answer might be A on the .pdf, but is in actuality B if actually taking the time to go through show commands. I basically rushed through it and memorized the dump without stopping to take time and reading the lab answers and reading the show running-config outputs from the labs. Therefore, I assumed answer was the same as the .pdf, it wasn’t. All in all, some questions were new, maybe 4 or 5. One question that stood out, which I maybe wrong in typing was, what two terms combine to elect the root ID, it had PVST+ and bridge ID in the question, again I feel like I am butchering the new question with my goldfish memory.
@sun thank you for your reply. Sorry it didnt work out for you this time. U werent that far off, keep at it!
Anyone know how the scores are based on? Like how much is each question plus LabSim questions are worth?
@Sun. Did you have EIGRP, OSPF, and GRE as those labsim?
@ sun
I each heard Labsim has around 100 point
I only had two labs. OSPF and EIGRP.
We need new reports on new questions. Can someone please post the new questions?
practice questions at
http://www.ciscovce.com
Sun in exam Drag & Drops Question ?
@Ahmed – Nope. None. Not a single one.
will icnd2.pdf and 9tut enough to pass the exam?
I also remember there was a question saying,
What causes a port to go into a errdisabled state – BPDU Guard
@Terri – Nothing you posted has the updated actual questions.
Question 128
Which IPsec security protocol should be used when confidentiality is required?
A. MD5
B. PSK
C. AH
D. ESP
Answer: D (ICND2.PDF says it’s A)
Seems to be D. ESP.
http://www.tml.tkk.fi/Tutkimus/IPSEC/chapter2.html
and
http://www.ciscopress.com/articles/article.asp?p=24833&seqNum=3
“Encapsulating Security Payload (ESP) is a security protocol used to provide confidentiality (encryption), data origin authentication, integrity, optional antireplay service, and limited traffic flow confidentiality by defeating traffic flow analysis. Figure 1-5 shows that the data payload is encrypted with ESP.”
fake post to make people fail is bad
Passed today. 51 questions with OSPF, GRE, EIGRP SIMs. Everything on this site along with icnd2pdf will have you good to go. As others have stated, don’t just memorize the answers for SIMs as they are completely different. I don’t recall seeing any new questions.