Share your ICND2 v3.0 Experience

I passed ICND2 today..201Q&a and 239q&a dumps still valid. @newdumps Thank you very much mate. Thanks heaps again

FYI =wanninayakegcb at gmail dot com

@Mark, please share with us the dumps here ,, cheers

SCAM
I passed ICND2 today..201Q&a and 239q&a dumps still valid. @newdumps Thank you very much mate. Thanks heaps again
FYI =wanninayakegcb at gmail dot com

good way to do marketing and selling dumps,,,, 😉

@newdumps please share dumps – forzasounds@gmaildotcom

Hello,
This is not totally business purpose.we have purchased these dumps for highly cost from different sources. After that we are sending to nominal sharing cost.

Newdumps.

Well you’re getting in the way of useful posts, go advertise else where.

@Dave the questions you placed together where they part of your exam??

Help please

@Mark please check the dumps that were posted and verify on their validity

@King

Yes

@dave, can u send t as PDF plz,

@dave,t wokng nw..thanx in adva…

@dave so with those questions its a sure pass?

@dave thank alot man u really reducing the stress levels maybe now i can focus on the correct stuff

guys is GLBP in the exam??

@oscar

Some questions will be there, long as you have done other studying and know your stuff, you will be fine. I posted some other stuff you need to know a few posts back. Make sure you look over them topics as that is what I failed on.

@a

I did not see any GLBP in my exam.

okay thanks

Congratulations!

I have passed my 200-105 exam yesterday by learning the PassLeader 200-105 dumps! (http://www.passleader.com/200-105.html) (346q VCE and PDF)

All questions were from PassLeader’s 200-105 dumps, and wrong answers have been corrected by PassLeader!

P.S.

Here you can get some free PassLeader 200-105 dumps on Google Drive:

https://drive.google.com/open?id=0B-ob6L_QjGLpUTVNc3otMV8xMkU

Good Luck!

NEW VERSION 5
ICND1 (100-105) = 239Qs and 201Qs
ICND2 (200-105) = 110Qs
Latest Dumps in Both PDF & VCE Format.
Working VCE Player
All time EMAIL Support for any querry.
You will also get free updates of Dumps for 60 Days.
FYI = wanninayakegcb @ gmail com

not these guys again

@New Dumps,,, what is your recommendation on “James wheeler” last post? is your dump’s questions similar to these ? any comments ? cheers

Relentless lol

Do anyone have this book: CCNA ICND2 Study Guide: Exam 200-105 3rd Edition by by Todd Lammle? Please hafe

Do anyone have this book: CCNA ICND2 Study Guide: Exam 200-105 3rd Edition by by Todd Lammle? Please share. Thanks so much

Hi Dave3, I’m back. I was burned out on studying and family and job obligations were extremely high this past week. Scheduled for retake this week. Any new info or are we still working off the same dumps?

Can someone please advise if they think passleader.com is worth the $99? I am reluctant to use any other website but 9tut however I am getting to the point where I just want to get it done rather than wait on 9tut to get the material

yes , I would be up-to-date Q&A, please do share with us after getting them, thanks

I don’t think it is ever worth paying for them!

If Frame Relay topic is out , then why still there are questions in the dumps…. 🙁

Frame relay has been removed and just ignore ant questions in the dumps that are to do with that.

A few of the older 200-101 questions are still used in the current exam, so just have to go through and do the relevant questions.

so at the moment the only relevant questions are the ones dave gave us guys?? im sure theres more guys who have written the exam, come on guys please share we need to work together here dave isnt the only person whos written, and by the way thanks again Dave

I feel like you guys are all below average IQ except for dave. its not hard to read and comprehend the past two pages of this forum. There honestly should be no questions or no confusion.

*mic drop

Updated dumps NOW.

ICND2 (200-105) = 110Qs and 204Qs available.

Fyi- wanninayakegcb at gmail com

Note= If some people doesn’t need any dumps.But others need help.

@Dave where did you find the best dumps? I take it is still worth using the material on 9tut except Frame Relay questions?

Guys lets work this one out together. CBT nuggets is giving a 7 day trial all access to their videos.
Is anyone of you planning on canceling their credit card soon? because you could signup and download the videos through IDM and save them and then share them with us, when the trial is over you can cancel your card.
check the link below.

https://www.cbtnuggets.com/it-training/cisco-ccna-icnd1-100-105.

guys hi! 🙂 someone have the official cert 200-105 pdf please???

Are the answers from the Simulation correct @dood

200-105 cert pdf.
https://www.dropbox.com/s/tpox9cyblme3cp8/CCNA%20Routing%20and%20Switching%20ICND2%20200-105%20Official%20Cert%20Guide.pdf?dl=0

@dave3 thank you very much!!!

@dood please help with the SIM

I SAT THE NEW 1 EXAM BUT IT WAS FKING OLD ONE AND I STUDY THS SITE HARDLY AND FAILED!! BE AWARE, STUDY OLD ONE ONLY. I WASTE EXM M$$ FOR DIS SiTE FUKIN BEECHES>>!

Are the answers from the Simulation correct @Dave3

@PHAGGOT, very sad to hear about that, can you please share with us your experience. What SIM came , well there would be mild changes though, because all course has not been changed.Better we prepare old content and then prepare new/additional topics.

There might be some errors on the simulations as I am still learning all this. Will go through them at some point.

Hi all
Im done creating the VCE out of Dave had shared with us. sharing to all of you as well.

https://www.dropbox.com/s/byzu401ukgh6tog/200%20-%20105.vce?dl=0

https://www.dropbox.com/s/byzu401ukgh6tog/200%20-%20105.vce?dl=0

Hi Forgot to include the VCE player.
https://www.dropbox.com/s/fqsle0evxk4o4re/Avanset%20VCE%20Exam%20Simulator%20Pro%20v1.0.2.7z?dl=0

@Fierce, Q14: Why did you add Frame rely Question ? Q29 need revision

also Frame relay SIM included ???? 🙁

Only get 5 questions from examunon http://pdf.examunion.com/200-105.pdf It is said that they are still the latest.

Get from this site http://www.examunion.com/200-105.html

Hi @Dumps Thank you for informing me. You can edit vce using the vce player I shared. It is a portable VCE player including the designer, that was the one I used to make a practice exam. By Im gonna edit it myself as well.

Hey Guys, Can someone please tell me, is there any actual configuration that needs to be done in icnd2 or just show commands same the before.

I will recommend you to prepare VTP and ACL configuration atleast

I only had show commands in mine.

@Dave still no valid dump?

Hi guys I am still checking the practice exam I created and I notice some wrong answer there. I apologize for this mistake. I am now validating this on the 204 file that Dave gave us. If you can check it on your own please do so to avoid mistakes. Please the use the Designer that I share with you.

Thank you.

@Fierce,,, yes many wrong… anyways I am appearing in exam tomorrow , I will keep you posted, I hope I will PASS…

Failed by 711, GRE , OSPF and EIGRP sim were there, with show command same in dumps.. I would just say prepare well with VLAN, some new question were there, which I couldn’t make them correct.

@Dumps

Do you remember any questions?
Which dumps are valid?
What the % of question that were already listed in the dump?

yes I remember the one from this dump, I would say 85% valid ,, https://drive.google.com/drive/folders/0B-ob6L_QjGLpUTVNc3otMV8xMkU

Has anyone else used passleader.com for revision material? Is the material good? I’ve only used 9tut and reluctant to use elsewhere

After failing my exam a couple of times, I am examining the answers in the dumps with a critical eye and fact checking them against Cisco literature. I will be posting the ones I question here, if the Cisco experts here can take a look at these, I’d greatly appreciate it.

Which two circumstances can cause collision domain issues on VLAN domain? (Choose two.)

A. duplex mismatches on Ethernet segments in the same VLAN
B. multiple errors on switchport interfaces
C. congestion on the switch inband path
D. a failing NIC in an end device
E. an overloaded shared segment

The dumps say A and C are the correct answers

This document – http://www.cisco.com/c/en/us/support/docs/lan-switching/virtual-lans-vlan-trunking-protocol-vlans-vtp/23637-slow-int-vlan-connect.html#troublesht_broadcast – under Troubleshoot Collision Domain Issues – makes it look like the answers should be A D & E. I know this is too many answers, what is Cisco looking for here?

After failing my exam a couple of times, I am examining the answers in the dumps with a critical eye and fact checking them against Cisco literature. I will be posting the ones I question here, if the Cisco experts here can take a look at these, I’d greatly appreciate it.

Which statement about QoS default behavior is true?

A. Ports are untrusted by default.
B. VoIP traffic is passed without being tagged.
C. Video traffic is passed with a well-known DSCP value of 46.
D. Packets are classified internally with an environment.
E. Packets that arrive with a tag are untagged at the edge of an administrative domain.

The dumps say E is the answer

This document – http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2950/software/release/12-1_11_yj4/configuration/guide/lrescg/swqos.html#wp1025595l – in the Default QoS Behavior section has the following info:

The default port trust state is untrusted – Should this make A the answer?

After failing my exam a couple of times, I am examining the answers in the dumps with a critical eye and fact checking them against Cisco literature. I will be posting the ones I question here, if the Cisco experts here can take a look at these, I’d greatly appreciate it.

Which statement about slow inter VLAN forwarding is true?

A. The VLAN is experiencing slowness in the point-to-point collisionless connection.
B. The VLANs are experiencing slowness because multiple devices are connected to the same hub.
C. The local VLAN is working normally, but traffic to the alternate VLAN is forwarded slower than
expected.
D. The entire VLAN is experiencing slowness.
E. The VLANs are experiencing slowness due to a duplex mismatch.

The dumps give answer E as the correct answer.

This document – http://www.cisco.com/c/en/us/support/docs/lan-switching/virtual-lans-vlan-trunking-protocol-vlans-vtp/23637-slow-int-vlan-connect.html#troublesht_broadcast – under Three Categories of Causes – clearly states:

Slow interVLAN connectivity (slow forwarding between VLANs) occurs when there is no slowness on the local VLAN, but traffic needs to be forwarded to an alternate VLAN, and it is not forwarded at the expected rate. Wouldn’t this make the answer C?

After failing my exam a couple of times, I am examining the answers in the dumps with a critical eye and fact checking them against Cisco literature. I will be posting the ones I question here, if the Cisco experts here can take a look at these, I’d greatly appreciate it.

You enter the show ipv6 route command on an OSPF device and the device displays a route. Which conclusion can you draw about the environment?

A. OSPF is distributing IPv6 routes to BGP.
B. The router is designated as an ABR.
C. The router is designated as totally stubby.
D. OSPFv3 is in use.

The dumps give A as the answer here.

I can’t find any supporting documentation, but the show ipv6 route command would show all types of IPV6 routes. Being as the question states this is an OSPF device, I’d be more inclined to believe answer D.

For this one C & E look like the correct answers from the material. The wording seems really bad to me and is confusing.

These are the possible errors under VLAN broadcast domain.

Traffic Loop
Overloaded or Oversubscribed VLAN
Congestion on Switch Inband Path
Switch Management Processor High CPU Utilization
Ingress Errors on a Cut-Through Switch
Software or Hardware Misconfiguration
Software Bugs and Hardware Problems

Which two circumstances can cause collision domain issues on VLAN domain? (Choose two.)

A. duplex mismatches on Ethernet segments in the same VLAN
B. multiple errors on switchport interfaces
C. congestion on the switch inband path <
D. a failing NIC in an end device
E. an overloaded shared segment <

If anyone else could clear this up, I would appreciate that!

Which statement about QoS default behavior is true?

A. Ports are untrusted by default. <
B. VoIP traffic is passed without being tagged.
C. Video traffic is passed with a well-known DSCP value of 46.
D. Packets are classified internally with an environment.
E. Packets that arrive with a tag are untagged at the edge of an administrative domain.

Totally agree with you on this one. This is the default settings from the material

•The default port CoS value is 0.

•The CoS value of 0 is assigned to all incoming packets.

•The default port trust state is untrusted.

•No policy maps are configured.

•No policers are configured.

•The default CoS-to-DSCP map is shown in Table 26-3.

•The default DSCP-to-CoS map is shown in Table 26-4.

•For default QoS and WRR values, see the "Configuring CoS and WRR" section.

Which statement about slow inter VLAN forwarding is true?

A. The VLAN is experiencing slowness in the point-to-point collisionless connection.
B. The VLANs are experiencing slowness because multiple devices are connected to the same hub.
C. The local VLAN is working normally, but traffic to the alternate VLAN is forwarded slower than
expected. <
D. The entire VLAN is experiencing slowness.
E. The VLANs are experiencing slowness due to a duplex mismatch.

I agree with you on this one again as the material you stated.

Thanks Dave3! How about the IPV6 route command question?

pass leader has the correct dumps but wrong answers 346q lol

Which technology supports the stateless assignment of IPv6 addresses?
A. DNS
B. DHCPv6
C. DHCP
D. autoconfiguration

Correct Answer: B

It should not be D?

@Ian Grimscythe

This is all I could find on this really. I’m not very strong on the IPv6 stuff. So maybe A is the correct answer.

http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6/command/ipv6-cr-book/ipv6-d2.html#wp3494762195

@Mario

The wording again is stupid on this question and is made to be confusing by cisco 🙁

To me this is asking for another technology that works alongside SLAAC and that would be stateless DHCPv6. My answer would be B

@mario

https://thenetworkway.wordpress.com/2014/07/02/ipv6-address-assignment-stateless-stateful-dhcp-oh-my/

@truth pass leader say they are always updating the questions… i take it this is not true?

@Rev not true at all

Package Include:

ICND1 (100-105) = 239Qs and 201Qs
ICND2 (200-105) = 110Qs and 204Q
Latest Dumps in Both PDF & VCE Format.
Working VCE Player
All LABS TOPOLOGIES for Packet Tracer 6.0.1
You will also get free updates for 60 Days, starting from your contribution date.

FYI = wanninayakegcb @ gmail com

@Dav3 thanks I will avoid them then? Where is the best information for new format of exam at the moment? There seems to be a lot of people saying different things. You seem like one of the few on here that know their stuff!

@Mario. Definitely B DHCPv6.

Autoconfig is a configuration option, and not classified as a technology

@Dave
Do you have any package for ICND2 like you had in ICND1

Thanks

Working on one now, need to go over the questions again and add the ones that were in my exam

hey Dave, plz share with us when
u done..m scared of writing and m thinking or rescheduling,..

@Denis do you have the ICND1 package you can share

@Angel

https://www.dropbox.com/s/z6uv0z4wr01rmse/ICND_2_PACKAGE.zip?dl=0

@Dave, Thank You very much…

hey Dave,been checking ur stuff and I c that you have only changed only 1 Q from your previous Quiz..

.which statement about QoS default behavior is true
=Port are untrusted by default..

so the rest z good..?

I’m still not sure about the collision domain issues on a VLAN domain. I put A and D in mine. The rest are ok I think.

Put ones up here that might be wrong and we can discuss them.

Hello,

I have some test questions that are from the real test that I cannot find answers for can someone help review these.

Which feature can you use to restrict SNMP queries to s specific OID tree?

A. A server group
B. An access group
C. A community
D. A view record

Which configuration enables OSPF for network 192.168.1.0/24

A. router ospf 1
Area 0 virtual-link 192.168.1.0
B. router ospf 1
Network 192.168.1.0 255.255.255.0 area 0
C. router ospf
Router-id 192.168.1.0
D. router ospf 1
Neighbor 192.168.1.0

Which three options are types of slow VLAN connectivity? (Choose three.)

A. slow inter-VLAN connectivity
B. slow collision domain connectivity
C. slow broadcast domain connectivity
D. slow default gateway connectivity
E. slow application domain connectivity
F. slow routing domain connectivity

Which type does a port become when it receives the best BPDU on a bridge?

A. The backup port
B. The alternate port
C. The root port
D. The designated port

Which statement about VLAN configuration is true?

A. Dynamic inter-VLAN routing is supported on VLAN 2 through VLAN 4064
B. A switch in VTP transparent mode saves the VLAN database to the running configuration only
C. The switch must be in the VTP server or transparent mode before you configure a VLAN
D. The switch must be in config-vlan mode before you configure an extended VLAN

Which statement about the IP SLAs ICMP Echo operation is true?

A. It is used to identify the best source interface from which to send traffic to a destination
B. It is configured in enable mode
C. It is used to determine the one-way delay between devices
D. The frequency of the operation is specified in milliseconds

Which WAN technology uses labels to make decisions about data forwarding?

A. Frame Relay
B. MPLS
C. VSAT
D. Metro Ethernet
E. ISDN

After you configure a new router to connect to a host through the GigabitEthernet0/0 port of the router, you log in to the router and observe that the new link is down. Which action corrects the problem?

A. Configure the host to use R1 as the default gateway
B. Use a straight through cable between the host and R1
C. Use a crossover cable between the host and R1
D. Use a rollover cable between the host and R1

Which value can you modify to configure a specific interface as the preferred forwarding interface?

A. The VLAN priority
B. The interface number
C. The hello time
D. The port priority

Which VLAN bridge priority value is assigned by the set spantree root command?

A. 16384
B. 32768
C. 28672
D. 8192

Which two statements about the spanning-tree bridge ID are true? (Choose two.)

A. The bridge ID is transmitted in the IP header to elect the root bridge
B. The bridge priority must be incremented in blocks of 4096
C. It is composed of an 8-bit bridge priority and a 16-bit system ID extension
D. The system ID extension is a value between 1 and 4095
E. It is composed of a 4-bit bridge priority and a 12-bit system ID extension

Routers R1 and R2 are on the same network segment, and both routers use interface GigabitEthernet0/0. If R1 loses communication to R2, which two items should you check as you begin troubleshooting? (Choose two.)

A. Verify the R1 and R2 both are using HDLC encapsulation
B. Verify that the R1 GigabitEthernet0/0 interface is up and the line protocol is down
C. Verify that the R1 GigabitEthernet0/0 interface is up and the line protocol is up
D. Verify that the GigabitEthernet0/0 interfaces on R1 and R2 are configured with the same subnet mask
E. Verify that R2 is using 802.1q encapsulation

Which feature can you use to restrict SNMP queries to s specific OID tree?

A. A server group
B. An access group
C. A community
D. A view record <

Which configuration enables OSPF for network 192.168.1.0/24

A. router ospf 1
Area 0 virtual-link 192.168.1.0
B. router ospf 1
Network 192.168.1.0 255.255.255.0 area 0 <
C. router ospf
Router-id 192.168.1.0
D. router ospf 1
Neighbor 192.168.1.0

Which three options are types of slow VLAN connectivity? (Choose three.)

A. slow inter-VLAN connectivity <
B. slow collision domain connectivity <
C. slow broadcast domain connectivity <
D. slow default gateway connectivity
E. slow application domain connectivity
F. slow routing domain connectivity

Which type does a port become when it receives the best BPDU on a bridge?

A. The backup port
B. The alternate port
C. The root port
D. The designated port <

Which statement about VLAN configuration is true?

A. Dynamic inter-VLAN routing is supported on VLAN 2 through VLAN 4064
B. A switch in VTP transparent mode saves the VLAN database to the running configuration only
C. The switch must be in the VTP server or transparent mode before you configure a VLAN <
D. The switch must be in config-vlan mode before you configure an extended VLAN

Which statement about the IP SLAs ICMP Echo operation is true?

A. It is used to identify the best source interface from which to send traffic to a destination (Not from what I have read) X
B. It is configured in enable mode (It is configured in global) X
C. It is used to determine the one-way delay between devices < (It can do both one way and round trip)
D. The frequency of the operation is specified in milliseconds (Measured in seconds, not milliseconds) X

Which WAN technology uses labels to make decisions about data forwarding?

A. Frame Relay
B. MPLS <
C. VSAT
D. Metro Ethernet
E. ISDN

I will add these questions to the quiz! Thanks!

Please @Dave3 , if you update or add questions on your quiz, could you share us the new download link of the quiz package ? please

@Dave do you have any links for share with us.I have luck by studiyng in ICND1 with your stuff.

Thanks Dave3, any clue on the last 5 questions. Also I have a few more questions I am going to post from an earlier test I took. I have taken twice failed both times because they changed all of the questions.

@Anon52

Will have a look at the rest of the questions today.

@Vince

There should be a link I put up on the previous page.

@Dave3
answer for question

Which type does a port become when it receives the best BPDU on a bridge?

should be

C. The root port

Right?
“This is the port that is the closest to the root bridge in terms of path cost”

@Anon52

Which two statements about the spanning-tree bridge ID are true? (Choose two.)
A. The bridge ID is transmitted in the IP header to elect the root bridge
B. The bridge priority must be incremented in blocks of 4096
C. It is composed of an 8-bit bridge priority and a 16-bit system ID extension
D. The system ID extension is a value between 1 and 4095
E. It is composed of a 4-bit bridge priority and a 12-bit system ID extension

Answer: B, E
C is not correct because “The system ID extension is the VLAN number and can vary from 1 to 4094.”