Share your ICND2 v3.0 Experience

@CCNAsaywhat,

do you remember what IPv6 questions where about? I don’t mean the exact questions and answer(If you know that, thats great and put them on here), but did they have to do with EIGRP and OSPF commands, like how to setup OSPF IPV6 subinterface command? Stuff like that?

@Goldenstein,

Are the words after the question mark, the answers you think it could be?

@Hdawg

Yes, or the choices that I could remember.

HERE WE GO AGAIN. DONT LISTEN TO “FOK” ITS FAKE!!!

@Goldenstein,

one more question. Do you remember if there were any questions taken out of the CCNAquestions_Dec_2017 pdf file?

@Goldenstein
Amazing job man, thank you.

@Goldenstein, nice brain to remember so much questions…congrats!!!

Did anyone get the answers to the questions posted by @Goldenstein?
These are totally different questions from the simulations we see there and the answers are not easy.

Does anyone know average time for 9tut to release new questions?

passed yesterday.
the new ospf hotspot sim is the same as here.
eigrp sim- same topology and minor changes in the questions. pay attention to unequal load balancing, as numbers mismatch and network statements.

some question i could remember:
1. snmp queries to a specific oid tree? view record
2. something about switch stacking: higher port density with better resource usage.
3. some question that the right answer is dhcp snooping.
4. BGP states.
5. tacacs messeges
6. acl rules priority (port filter/route filter….??)
7. pppoe: the exact same question from 9tut

i’d say 40% from the question was from 9tut and the rest was pretty hard to answer.
some SDN questions, BGP, SNMP, OSPFv3, distance vector vs link state.
no drag and drop.

@AJ
What are the labs falling?

@AJ,

Are you sure, there is no drag and drop? Some others have said there were so that’s the part I’m really confused in

also you said the pppoe question is exactly the same as the 9tut question. Would the question happen to be this:

Which type of interface can negotiate an IP address for a PPPoE client?
A. Ethernet
B. dialer
C. serial
D. Frame Relay
Correct Answer: B

and regarding the snmp queries and oid tree, would the question be this:
Which feature can you use to restrict SNMP queries to a specific OID tree?
A. a server group
B. a view record
C. a community
D. an access group
Correct Answer: B

@Thefrus
what do i mean by labs falling?

@Hdawg
no drag and drop for me. 100% sure.
about those 2 questions: yeah those are the ones that i had in my exam.

@AJ
What were the labs in your test?

@Hdawg
How do you see the title of the 9tut questions? bought premium access?

@Thefrus,

what do you mean the title? I don’t have premium access but if you look a couple pages back, there is a link to where you can obtain the pdf file with all 200 or so question/answers

@Hdawg,

Is Icnd2.pdf?
I already have, but I do not trust him, he has many wrong questions and seems to me very outdated.

@Thefrus,

Theres another one that 9tut has a link to. It’s the CCNAquestions_Dec_2017 pdf file. thats the latest before the new exam was layed out a couple weeks ago. I’m looking at both. I belive the CCNAquestions_Dec_2017 has questions for ICND1 as well, so I just highlighted the topics for ICND2 that are on this website and did those questions only.

@AJ thank you, man

@Hdawg,

Thanks, I’ll look for this file.
When’s your test? Mine is for March 2, but I’m very worried because I do not think updated material.

@Hdawg,

I found this pdf on the internet, available at the link below, stating that it is updated, what do you think?

https://drive.google.com/open?id=1atLbHauCFYngkChOSI2HIVELyi_rDcot

passed by the hair of my chiny chin chin. 83x/1000. I had no dhcp snooping questions. I had drag-n-drop question. Split horizon, route poison, triggered updates, and maximum(something). I had one lab and it was eigrp. To be honest, I only had about 15% of the questions from icnd2 pdf and the december pdf versions.

There was a RADIUS question asking about whether RADIUS sent passowrds/username in cleartext or encrypted username/password and sent other information in clear text, or encrypted username and sent password and other info. in clear text.

The very last question I had talked about host x and host y not being able to communicate with each other and choose the reason why. It was a router on a stick image. the choices were something like. A. host X uses the broadcast address as its subnet B. host y has ip address and subnet configured wrong C. Host y has subnet configured wrong D. Host X has default route configured wrong.

some of the questions had you scratching your head because they weren’t clear enough or the answers were too vague. There were different layers to some questions where I had to really think it through and try to simplify their question. Once I did that, I was able to get the correct answer. Cisco doesn’t do a good job with how they word their test questions. They need to improve that aspect of the test.

@Hdawg , only the password is encrypted in radius. Did you had this choice?

@Hdawg sounds like you had same test as i had

@gareth,

ya, that was one of the choices.

You know what I think? I think cisco has a couple versions of the exam and some of us get one version and others get another because some people on here said they didn’t have any drag-n-drops and other people said they had. I had 1 drag-n-drop and 1 lab sim. It was wan EIGRP sim, thats it. i was expecting two sims so I was kinda hurrying with the questions because time was running out and I thought the two sims where going to take up most of my time, but I found out there was only 1 sim and it was pretty easy. It took me less time than I thought.

@Hdawg , Ok and did you got questions from above?

here was one question i know was on the exam
http://vceguide.com/how-can-you-disable-dtp-on-a-switch-port/

some people say the correct answer is A, but I chose D.

@Hdawg , can u remember other questions?

@gareth

This one was on the exam, but worded a little differently:

What does it take for BGP to establish connection : AS Number on local router , AS nu,ber on remote router

Another one: 60. Which two statements about eBGP neighbor relationships are true?(it was worded a little differently, it said BGP instead of eBgp)

@Hdawg ok thanks 🙂

@Hdawg what was the drag n drop ?

@gareth,

I more of a visual guy in the sense that if you give me a list of questions I can point out 90% of what questions are on the test. I don’t remember how each is worded exactly.

I’m looking at the pdf that Thefrus sent and seeing which ones are on the test. I looked through half of them and don’t see any that I recognize.

@gareth,

I posted on the very top.

@Hdawg,

Oh ok sorry. Did you had question about QOS/SNMP/Stacking?

Which statement about DTP is true?

A. It uses the native VLAN.
B. It negotiates a trunk link after VTP has been configured.
C. It uses desirable mode by default.
D. It sends data on VLAN 1.

I keep seeing this question over and over again. The answer is A. It uses the native VLAN.

Reference is here: https://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/24330-185.html

In summary, note this information about trunks:

CDP, VTP, and PAgP updates are always forwarded on trunks with a VLAN 1 tag. This is the case even if VLAN 1 has been cleared from the trunks and is not the native VLAN. If you clear VLAN 1 for user data, the action has no impact on control plane traffic that is still sent with the use of VLAN 1.

On an ISL trunk, DTP packets are sent on VLAN1. This is the case even if VLAN 1 has been cleared from the trunk and is no longer the native VLAN. On an 802.1Q trunk, DTP packets are sent on the native VLAN. This is the case even if the native VLAN has been cleared from the trunk.

Note: Since we are obviously talking about 802.1Q trunk, this part is what we are looking for: “On an 802.1Q trunk, DTP packets are sent on the native VLAN. This is the case even if the native VLAN has been cleared from the trunk.”

@Hdawg
congrats man!!! =)

@Hdawg congrats!!!
did you get some IPv6 questions?

and I keep seeing this:
Which command do you enter to enable an interface to support PPPoE on a client?
with two correct answers:
pppoe enable

and

pppoe-client dial-pool-number 1

DONT LISTEN TO BOOM. ITS FAKE!!

@Billy The Dump & gsp,

Thanks guys, It’s a load off. been studying off and on for a couple months and was starting to get tired. Now I’m gonna focus on security, but probably take a 1-2 week break. I’ll keep coming on here to help you guys and let you know what I remembered off the exam.

@gsp,

ya I got a couple Ipv6 questions(not too many) One I remember was where it asked how you would enable IPv6 for Eigrp All the other answer where wack, and the only answer that made sense to me was the third one which said”ipv6 unicast-routing” so I chose that one. I believe one of the choices was “eigrp ivp6 as-number”(that isn’t right because the real answer to that is ipv6 eigrp as-number). you had to really think about it on different levels because they throw cr@p like that on for answers. They just switch one word and put it in a different location. Its stupid in my opinion.

@Hdawg

Do you remember if you had questions about the new topics? Ex: Cloud, Qos, SDN …

Which component of the Cisco SDN solution serves as the centralized management system?
A. Cisco OpenDaylight
B. Cisco ACI
C. Cisco APIC
D. Cisco IWAN

@Hdawg, thank you and you deserve 2 weeks break 😉

can anyone please send me the ICND1 100-105/ICND2 200-105 dump to chaimaechekira(@)gmail(.)com

@Thefrus,

I didn’t get that type of question. I did get a QoS question. I honestly don’t remember exactly what the question was, but the answer was CoS(Class of service). I’ll try to remember it and get back to ya.

@Hdawg

Could you please remember how many labs did you have and what were they about?

thank you 🙂

@raptor
he mentioned it:
” I had one lab and it was eigrp. “

@Billy The Dump
Thank you. Sorry for the spam

@hdawg:
Was it: What 8-bit field exists in IP packet for QoS?
-Tos Field
-DSCP
-IP Precedence
-CoS

Hello; someone else appart hdawg took the exam and can share information?

Are the passleader dumps valid?

@Hdawg

Do you got : On which layer tcp/ip is ACL Apic EM Path

@wayne Goulden as you shared 200-105 there is almost 271 Questions and you said new version is almost 497 question please provide dumps which have 497 question thanks .

DON’T LISTEN TO UJK, ITS A FAKE!!!

@xidar,

Yest that was one of the questions.

@gareth,

no I didn’t get one of those questions

@HDawg man you passed your exam and yet you’re still here helping out. Truly a man of the people 🙂

@9tut
Where are the new questions? Any prevision?
My test is near and nothing new questions.

@nixae,

Here are the ones I remember being on the test.

7,10, 13, 15, 17,18,19,,22(i think it asked you to provide two answers),25,27,29,30(i think, but not 100% sure)

@Reggae,

There have been other people who have also contributed to answers after taking their exam. I’m just trying to do the same. I know they helped me in some aspect of the exam so I’m passing it on. People definitely have to read and understand the material and do alot of practice sims/tests. I know that helped me pass.

@hdawg thanks !

by the way, what do you think about this question?

13. You are trying to troubleshoot the connectivity lost between 2 devices. How do you start troubleshoot? using extended ping? using trace route? using extended ping from the source

@HDawg
thanks for all the help and advice. I’m just trying to do as many questions as I can now. So many strange questions cisco brings…

@Billy
Just my 2c… I think you start troubleshooting using traceroute to find the point at which connectivity is broken.

anyone know if the ICND2 Composite Quizzes is updated with the new questions?

@Reggae

yeah, but I think we need to see topology to answer
may be the hosts are on the same network, so we don’t need traceroute then
anyways, I think we have to use just ping as the first step of troubleshooting, or extended ping from the source interface

and if the ping works,- we cant guarantee L3 connectivity, so the problem is on the upper layer (for example misconfigured ACL is blocking traffic at L4)

and if the ping works,- we can* guarantee

@Billy The Dump,

Your correct in needing to see the topology for the answer, but I think that question had more to it. I think it said to assume that Layer 3 process was working fine so that would eliminate traceroute. I would use ping as first step of troubleshooting.

hey people I just passed with 86x… I got 2sims EIGRP and OSPF(new hostpost) no drag n drop to be honest there were less than 10 questions from 9tut

good luck …

@Zaza congratulations, do you remember any of the new questions?

@ Wayne, the drive says last modified 2016. Are these old questions?

@Zaza , can u share information about the questions?

Hey guys
i know this is not the best place but i need help to find something on cisco 500-551 exam
I cant find any resource any help would not just be great it would be amazing…

Passed 9xx/1000

I had>
– EIGRP and OSPF(hotspot).
– maybe 5Q from 9tut – so a lot of new Q
– no drag n drop

@Duss , can you share informations about the new question?

@gareth

What I remember.
EIGRP LAB was the same but different answers. OSPF Hotspot was the same.

1. Which of the following provide the highest availability (one answer)

= full mesh
= partial mesh
= hub and spoke
= something

2. Something like – What can MPLS provide?(two correct Answers)

= Authentication Header
= something like secure payload of packet with ESP
= VPN
= something

3. what does this monitor session command mean? (one answer)
—- monitor session 16 source interface Gi0/11 —

something like>
= source monitoring session – unidirection
= destination monitoring session – bi-direction
= source monitoring session – bi-direction
= something

4. Which ACL rules are applied as first? (one answer)

= port filter
= router filter
= something
= something

5. Which is true about IGP? (two answers)

= May use Bellman-Ford algorithm
= May use Dijkstra Algorithm
= can be used between company and ISP
= can be used betwen router – Firewall – router

6. Which command will remove vlan 10 from trunk (one answer)

= switchport trunk allowed vlan remove 10
= switchport trunk allowed vlan add 10
= something
= something

7. troubleshooting connectivity between 2 devices. How will you start? (two answers)

= ping
= extended ping with source
= traceroute
= something like, connect to source’s next hop and do ping to destination

8. Which is true about keep-alive interval? (one answer)

= if was modified – should be equal on both side
= have to apply on both side
= something
= something

9.Which of the command enable PPP over Ethernet? (one answer)

= pppoe-client dial-pool-number
= ppoe enable
= something
= something

10. Which command immediately put port into forwarding.(one answer)

= spanning-tree portfast default
= spanning-tree portfast bpduguard defaul
= something
= something

11. Which feature can prevent switch to become Root Bridge? (one answer)

= VTP
= DTP
= Root Guard
= BPDU Guard filter

12. Which mode of VTP will only forward messages and ignore updates??? (one answer)

= client
= Server
= Transparent
= something

13. Which is correct about APIC-EM Path trace ACL?? (two answers)

= it checks only ingress interface
= it checks only egress interface
= it checks ingress and egress interface
= if find ACL which deny traffic, will stop – or something like that 🙂
= something

14. If TRAP in SNMP is not working, where can be issue? (one answer) something like that

= Trap was not set
= wasn’t put command “snmp-server enable traps”
= snmp server host has not configured inform messages
= something

@Duss

Thanks for the info!

Duss you are my hero, thank you!!

PS have a test in a week x_X

Oh and congrats on the passes @Duss and @Hdawg

@Wayne Goulden ….. The link was old dumps … only 250 q .. Can you provide the new updates dumps link for icnd2 200-105

@Duss

when you say only 5 questions from 9tut. do you mean 5 premium 9tut?

the SPAN monitors both sent and received traffic.

both —Monitor both received and sent traffic. This is the default.

Do you guys know what would be the answer to the above questions ?

@Duss , what are your answers ?

@Van
Yes, premium 9tut

@Duss do you got some question from the icnd2 new questions section ?

@gareth,

I had some question that @Duss provided like Q1 ,2 ,3, 4, 5, 7, 8, 9, 10, 11 and 13 also I had 3Bgp Questions

question 3 – command means source monitor session – unidirection
question 2 – auth & vpn

I think @Duss and I had the same exam

@Kaz ; bidirectional is the answer the SPAN monitors both sent and received traffic.

both —Monitor both received and sent traffic. This is the default.

From cisco

@Duss can you remember the bgp question ?

Which of the following two things does QOS provide? What are the choice

Which is true about IGP? (two answers) What did you answer

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/12-2_55_se/configuration/guide/3750xscg/swspan.html

@Zaza can you remember the bgp questions ?

@gareth, the question did not ask you about the default state.

Question : what does this monitor session command (monitor session 16 source interface GI0/11) means?

Answer : source monitoring session – unidirection

Reason for answer : A source interface can not be simultaneously configured as a destination interface.

Thanks @Duss ! amazing

Can you remember the choices for the Qos question ? Would be great !

1 A
2 ?
3 C
4 ?
5 A B
6 A
7 A and B?
8 A or B?
9 A or B?
10 A
11 C or D
12 C
13 C and D
14 A or B

13 : For example, if an ACL has entries that would deny the traffic on an interface along the path, the results of the analysis are reported as if the traffic had reached the destination without being denied by the ACL from cisco ; so not answer D

@kaz
The SPAN session on the switch will copy all the traffic that it sends and receives on source port F0/1 => the answer is “source monitoring session – bi-direction” – C

@Kaz , a source interface can monitor trafic received and sent , this is the default behaviour ; so birectional

1 : Full mesh
11 C
7 A C
9 A

4 : What is port filter and router filter?

8 : I would say B

@nixie
if so, we don’t have the second right answer, because A and B are not correct

@gareth agree on B for 8

Yeah but answer D is false 100%