Share your ICND2 Experience

@Lukaash! Thanks all the same. I will still use your file.

!!!!
if someone will take the exam in the next few days, let them know how many questions are there to test.

thanks

Guys
ccnp here i come..
just passed icnd2 scoring 872.. not nice score but i failed twice in 802. compiling document for questions and answers. got following sims

vtp sim
find 2nd usable ip and assign to switch(1st was assigned to gateway so becareful)
assign gateway(show runn on other switch and note down gateway and assign to this switch)
show vtp status (to see domain name on first switch and assign to 2nd)
set vtp mode client

ipv6 two qeustions same on hanabouse docs
guys doing just dumps wont work, need to understand the logic
will try my best to upload doc today otherwise definitely tomorrow.

@Zeno. Thanks to you in advance. Will be taking my icnd2 test next week. Looking forward to your doc!

Hey luukash you are a MASTER
Saludos desde Costa Rica

@Zeno! Congrats for having made it. A pass is a pass and that’s the most important thing. I will be looking forward to your doc.

Hi guys, I have a question, maybe someone can clarify this for me:
There is a question I keep seeing the the dumps about the way a packet will go trough a switched network. Please see the photo in the link. I can’t understand why I am wrong with this. http://img8.imageshack.us/i/63666990.jpg/
Thanks in advance

hi all, i am also having confusion from http://img8.imageshack.us/i/63666990.jpg/

If packet is passing back a->e->a->d

a->e->a , i hope it is looping

So i think answer will be a->e->c->d

Please help me on this

Thanks
Karthik

Karthik, I believe you are spot on with your thoughts.

Test B Q no 8 corrcet ans is

access-list 3 permit t host 172.16.3.3.
line vty 0 4
access-class 3 in

no access – group 3 in

Hi all , i have to take the test on this coming monday…… is there anybody who have to take the same test………… i would really appreciate if someone share something beneficial.
will let u all know about my exam

thnx in advance

Hmmm, can anyone help to upload @zeno docx to megaupload? I got problem downloading it from RS.

hi all, i am also having confusion from http://img8.imageshack.us/i/63666990.jpg/
If packet is passing back a->e->a->d
a->e->a , i hope it is looping
So i think answer will be a->e->c->d
Please help me on this
Thanks
Karthik
Please anybody give me correct answer, next week i am writing exam

Karthik… You are correct. The packets CANNOT return to the originating equipment. If it does return, a loop has occurred. Therefore, the answer is a->e->c->d

What does ospf use to load-balance traffic?

A. bandwidth
B. cost
C. ip ospf cost
D. clockrate
E. ip ospf distance

Frame relay sim
vtp sim

they were in today’s exam.

Albatros

A&B Cost and Bandwidth

@Albatros

I assume this is a one answer question, my answer is

C. ip ospf cost

@Albatros the answer is
ip ospf cost & bandwidth

Thanks a lot Zeno for offering me and sharing such a nice information regarding test.
I have memorized all the dumps like honabusa and matty Doc, test inside and brain dumps,
now let’s see what’s gonna happen tomorrow 🙂
will let u know guys don’t worry 🙂

Hi all and many thanks to 9tut and all the people associated with. just passed my exam today with approx 900 marks.
c u all in ccnp 🙂

Thanks to all, passed my ICND2 on saturday. There are some of the questions/lab i had to do:
– Switch Lab (see matty’s doc)
-Frame Relay Sim (see CCNA 9tut website)
i had some drag and drop questions about holddown timers etc.. but it was different to the ones i’ve seen from the dumps and on this website. on the exam i had to drag and drop the explanation into the corresponding action (holddown timer, poison reverse etc..).
one of the questions was 2 switches connected to 2 hosts each (vlan10 and vlan20) and had a box in the middle with a question mark and then it ask you to choose the device name with the cabling required.

I got 1 question about IPV6, i had to choose 2 charachteristics, one loopback address and something about link-local with FF something something, so revise that.

I got IP addressing scheme question, where one switch has 16 hosts and it gives you the option of /28 and a /27, make sure you remember the -2 (MINUS 2) rule, one for broadcast and one for network so choosing the /27 is the correct answer.

I had a lot of question with ACL so revise that inside out.

Hi,
I schedulled my exam next week on Tuesday in Romania. I have been studying: CBT, Chris Bryant and all the dumps on certcollection and 9tut. Making last preparations this week.
Wish me luck. I’ll be back with the result.

Taking my test tomorrow. Watched CBT Nuggets several times, P4S…. over and over… and over, Matty’s Doc, and Cisco Packet Tracer (Downloaded CPT sims from 9tut). I will update everyone tomorrow.

I’ve taken the exam twice now, got my a$$ handed to me on questions I had not seen before. Used 9tut and testking Q&A. Can somebody point me in the right direction so I can actually pass ICDN2 640-816?

If you have any dumps that are right on to the test can you send them to pleasehelpme1234@yahoo.com

Thx !!!

@CW! All the best and let us know how the exams will be.

@Failedit, I highly recommend looking for a torrent of Cisco Packet Tracer. Then download the SIMS from here: http://www.9tut.com/69-practice-real-ccna-labs-with-packet-tracer-simulator Additionally this is the latest P4S: http://www.4shared.com/file/eP3eBPAq/ICND2_P4S_272_questions.html

I will let everyone know how it went for me tomorrow morning. I feel good… but sometimes that can be a bad thing!

thanks CW

Just walked out…. 950/1000. I will give details later today. ALL questions were from p4s…. All of them!

OK…. so I have had time to reflect on today’s test. Here is the bottom line…. as I stated before I “Watched CBT Nuggets several times, P4S…. over and over… and over, Matty’s Doc, and Cisco Packet Tracer (Downloaded CPT sims from 9tut).” If someone knew nothing about networking and only did the P4S program (Honabusa’s document) and the Cisco Packet Tracer with the downloadable SIMS here on 9tut… they will pass. Every question was from P4S and is on Honabusa’s document. I paid for the P4S and I assure you there has been no updates since Honabusa’s document was created. Yes it is 272 questions but if you know them by heart your good! Download the Cisco Packet Tracer and the downloadable sims here on 9tut. I had several drag and drops one with Split horizon – hold down timer – LSA and so forth (On P4S) . I also had another drag and drop covering IP address, netmask (on P4S). A lab sim assigning IP, default-gateway, vtp mode, and vtp domain. EVERYTHING is on the P4S (Honabusa’s) document.

Have fun….. see you in CVOICE, CCNA Wireless, then CCNP!!!!!

Hello,
Can someone please check out http://img249.imageshack.us/i/41539413.jpg/
and tell me why is that answer considered to be correct please? I just can’t understand it.
Thanks in advance!

@CW!! Congrats for nailing the exam and thanks for keeping us your experience.

@Allex1, the answer is correct.

ACLs work off of three basic rules.

1. Top down processing
2. Immediate execution upon a match
3. Implicit deny any at the end

The deny statement they are asking you to put in would come after the “permit ip any any” statement that is alread in place. Since we have immediate execution upon a match, you would never make it to the new deny statement. So the change would have no effect on the packets being filtered.

Hope that helps.

@CW…Congrats on passing the exam…

Thanks for the update on Honabusa and P4S …Just one request
Could you please elaborate on the Sims that you got and where are they on the
9tut site…are you perhaps referring to the ones in Matty`s doc

The new VTP sim has been added. Please check it here: https://www.9tut.net/icnd2/icnd2-labsim/vtp-configuration-sim

Thanks a lot Diggi,
What you say makes sense but the question was probably asked in an impropriate way for me as I did not understand it as you explain. Thanks for explaining it to me.
@9tut , Thanks a lot… 🙂

@s.a.ciscoguy Know all these sims: https://www.9tut.net/icnd2/icnd2-labsim/vtp-configuration-sim

and

http://cisco.netacad.net/cnams/content/packetTracer/PTCache.jsp

Remember to find a copy of Cisco Packet Tracer via the web. You can find it on numerous torrent sites.

@s.a.ciscoguy…. messed up! Know all these sims: https://www.9tut.net/icnd2/icnd2-labsim/vtp-configuration-sim

and

http://www.9tut.com/download/CCNA_DragDrop_EIGRP_RIP_NAT_and_implementation_LabsInPacketTracer.zip

Remember to find a copy of Cisco Packet Tracer via the web. You can find it on numerous torrent sites.

@s.a.ciscoguy…. tut is on the ball! Download the VTP sim here: https://www.9tut.net/download/9tut.net_VTP_Sim.zip

Hello,
Can someone please explain this one to me? http://img11.imageshack.us/i/30992160.jpg/
What does vtp traffic has to do with access lists on a router?
Thanks in advance!

literal mistake should be vty

It is a question you will see on the exam…. exactly as written on your picture. Access lists may be used for purposes filtering IP traffic, defining traffic to Network Address Translate (NAT) or encrypt, or filtering non-IP protocols such as AppleTalk ,IPX etc. See: http://www.cisco.com/en/US/tech/tk648/tk361/tk821/tsd_technology_support_sub-protocol_home.html

Thank you!

few questions(corrections)
http://tinypic.com/r/hs6ykk/7
Should be right answers
RSTP DOES define new port roles-discarding for example
RSTP is compatible with 802.D and it is actually is 802.w standard
I’ll check some more

Tomorrow is my big day! before I’ll go I have one more another question?
should I repeat LABSIM from the ICND 1 ?
or I get only those from the ICND 2 if Im passing this exam

Thank you for your reply.

I will know how it went

@ CW thank you for the update…much appreciated …

@luukash Good luck,
i will be taking my exam tomorrow as well. Hope for the best.

@Luukash. You will not see labsims from ICND1. You will only receive labsims from ICND2.

@Yaknow

RSTP merged “Disabled” – “Blocking” – “Listening” into “Discarding”. Basically it took the Disabled, Blocking, and Listening of STP and gave them a new name known as DISCARDING. But while it merged these three port states, note it did not “Define” a new port state. RSTP only merged existing STP port states into a new name (Discarding).

http://www.cisco.com/en/US/tech/tk389/tk621/technologies_white_paper09186a0080094cfa.shtml

@CW
Thanks for pointing this out-got that(tricky cisco bastards)))
What about RSTP is proprietary implementation of 802.q standard
Is it correct too ??

@yaknow… there is a time when we must concede defeat to Cisco. And this sir, is one time I concede…. I have absolutely no idea why it is proprietary. I have looked and dug around everywhere and I am clueless.

Here is another one:
http://img11.imageshack.us/i/35063107.jpg/
Can someone please explain to me what will prevent the routers to form a neighbouring relation? Or is it because they don’t show the conf of R2 and you can’t assume the proper network commands have been set?
Thanks in advance.

@Alex
There on your example there is incorrect default static route( it says everything you don’t know send out int s 0/0 should be s0/1 instead pointing ISP) causing neighbor relationship not to form

@sw

Yep not sure about this one too

@ luukash! All the best with your exam. Please let us know what the content will be.

@CW Thank you for the update …and the links that you have posted…
much appreciated

hi , i have completed icnd 2 yestersday , thanks for Honabusa , Matty documents and 9tut team

Few are below,

https://www.9tut.net/icnd2/icnd2-labsim/vtp-configuration-sim
https://www.9tut.net/icnd2/icnd2-drag-and-drop-questions-2 ( q3)
https://www.9tut.net/icnd2/icnd2-operations (q1)
http://www.9tut.com/ccna-hotspot-questions ( frame relay )
http://www.9tut.com/ccna-ipv6 (q4) and also (q2)
http://www.9tut.com/ccna-troubleshooting-2 (q3) and (q4)
http://www.9tut.com/ccna-access-list (q2)
http://www.9tut.com/ccna-eigrp-questions (q1)

And also prefer to read cisco practice questions

Thanks

Karthik

@luukash and CW
http://i52.tinypic.com/i1ffgh.jpg

Here is an error A supposed to be designated router.

Hi,
just got back from the exam:
The good news is that I passed with 905, the bad news is that more than 50% of the questions were not from the latest dumps I worked(luukash and the others new ones, 3 or 4). I have seen many questions that I haven’t saw before in the dumps I worked (And I worked a lot of dumps). Many had some trick questions, at first I was sure of an answer but when I read again I had to put another answer. There were 2 or 3 drag and drop questions that I haven’t seen before. I got the new VTP sim, the Frame-relay question sim, and another question sim that I can’t remember right now. It took me about 100 minutes. So my advice would be not to relay on dumps very much, know the concepts very well. After the first 10 question I was beginning to wonder if I will pass.
Thanks a lot guys for all your support and most of all thank you 9tut.

i took exam yesterday , most from 9tut, Honabusa , Matty documents , but few questions i did not see before , some what tricky , any how i have managed to pass , some questions will misfire in the sense tempted to answer wrongly

@Alex1

Thanks

Cisco at its best, weeding out those that do not know the stuff.

919 more about it on sat or sun cos i do not have any time!
thanks 9tut and all who support me 🙂
finger x for others who is going on exam!

failed today with 798.

I studied Pass4S$% until 98% on all the 272 questions.

I studied 9tut sims and ran packet tracer to do the sims…which I did good on.

the problem was all the multiple choice questions were different, strange and unfamiliar.

there was maybe 6 questions from pass4sure that I recognized.

🙁

also: several of the drag and drops were on the ICND2 test

all of ICND2 9tut.net questions are in the latest version of p4s 640-816 icnd2

there were only 6 or 7 identical multiple choice on the real test.

I can’t recall the unfamiliar questions because there was over 20…

ipv6 transitions tunnelling :choose three

@ luukash! Congrats for passing the Exam.We will wait to hear about it when you are ready.

any more comments as it seems the exam has changed drastically ??

I have a minute before I go to work so

1. Admission is damn difficult.
2. If you are learning ONLY the brain so you will not sit still a little on the computer.
3. You must know your stuff …. otherwise you fail.

I had vtp and frame relay.
Most of the questions were from P4S from Honobusa’s PDF so thank you to them in published work. Some of that the questions were from

W1zard.312q.

and the exam every point counts so check them too.

A list of questions that I had i will try to create and make available on Sat or Sundays

I wish you all good luck and see you on CCNP

thanks Luuk good info for moving forward…

Failed Yesterday. 4FS only had a hand full of questions. Anyone know of a updated guide? There seemed to be other multiple choices on there.

I am finding the “strange” multiple choice questions in the ccna 802 test question pool… I too had only 6 or 7 multiple choice questions from p4s.

Philly guy, please contact p4s support and tell them their test is wrong. this was their response to me :

Make sure that your Testing engine has all 272 questions sets. We don’t receive any other complaint on it. We will confirm again with our product department.

I have installed the VCE program and am reviewing questions….and lot’s of 640-802 questions were on my test.

@TestICND2… I emailed them yesterday, and have not gotten a response. I do have the engine with 273 questions.

subnet mask for 310 hosts. .254

Pass 4 Sure Conversation…..
Cindy:
hi
Cindy:
how can I help you
Guest:
Hi Cindy. I sent an email yesterday regarding a failed 640-816 test. There were on about 10-15 questions on it pertaining to the study guide
Guest:
I have also seen online that others are having the same issue
Cindy:
Let me know, your order number
Guest:
ok, one second please
Guest:
20101207*********
Cindy:
Wait a minute plz
Cindy:
I just forwarded your request to our product team, they will again review and fix it asap
Guest:
Does that meen there will be an exam update? If so, what is the time frame? or a refund?
Cindy:
Yes, we will release next update asap
Guest:
How does the update get applied?
Cindy:
Your exam engine will download it automatically
Cindy:
Just go in the exam menu
Cindy:
and click on check for updates
Guest:
Ok, I guess I will have to check back then
Cindy:
sure

the acme @ infotek .vce has four or five of the questions I saw.

well, they’ll want you uninstall the program, delete the program folder and then reinstall from a freshly downloaded copy of 640-816 ICND2 into a non-default location. which will kill any hope of auto updating.

their “guarantee” states they will update test within four days of a change….

bpdu guard (answer to one of the questions)

That was on mine

@Philly Guy

ok, I have rescheduled my exam for next week, but your message and the ones above contradicts totally what CW wrote on page 13, and he took the text just 6 days ago. So I’m wondering how does the eSim test software update its pool of question, is it global, and is there any delay in updating between english and other languages ?…

phiilyguy and I took the test yesterday…..and we both said there was little of P4S on the test… CW took the test 6 days ago……. and said it was 100%

I scored a 798, and believe I completed the Labsims correctly. I’ve found @ 6 questions that I’ve answered wrongly in a few of the dumps that I’ve been searching today..which were on the test but not in P4s.

anyone have a more complete name for Honabusa’s and Matt’s document ?

well I’ve checked some “certexampass” site, dump4certs has updated december 9 2010, p4s december 5 2010, certifyme january 14 2011, testking november 8 2010, actualtests august 31 2010…

dunno who’s more “reliable”

Gentlemen…. I have seen a few people posting different results. Mt test was 100% from p4s. I knew all 272 questions forwards and backwards scrambled and unscrambled. I have seen several people post questions they received on their test but “were not in p4s”. Some of these questions I know are in p4s. I’m sure in some of the exams nerves played a piece of the missed questions. I recommend p4s, mattys doc, and cisco packet tracer. Was I lucky I received all questions from p4s, maybe. But I would take the exam again and bank on the exam questions were in the documents I used. Know them scrambled and unscrambled.

This is on page 12

1.What are 3 transition IPV6 TRANISTION MECHANISM.
A.6to4 tunnelling
B.VPN tunnelling
C.GRE tunneling
D.ISATAP tunneling
E.PPP tunneling
F.Teredo tunneling
ANS: A,D,F
2.Which Cisco catalyst feature automatically disable port in an operation PortFast upon recipt of a BPDU?
A.BackboneFast
B.UplinkFast
C.RootGaurd
D.BPDU Guard
E.BPDU filter
ANS: D
3.Which port state is introduced by Rapid-PVST?
A.Learning
B.Listening
C.Discarding
D.Forwarding
ANS: C
@Xavi…Sim was on VTP i.e configuring IP,change from server to client mode & change domain name

Yes CW, there are 3 of the not on P4S

I will list the others when I get home. Mobile now

I used p4s, Cisco book, Act Cert & another vce & here of course. But, did not expect 802 questions on it.

I had a NAT question where option was to re-apply inside or outside on whichever interface you wanted to….if I recall correctly it was overloaded but I don’t remember seeing a pool.

@ CW

these 3 questions are not in the ps4 272 question posted here by honabusa neither in the luukash .vce version. I too know all 272 questions forwards and backwards scrambled and unscrambled, and it’s been 4 days I’m scoring 1000 every single time on all of the exam within 10 mins for each.

@luukash

first of all thank you for your patience to have made these as .vce, then I’m actually on the W1zard.312q and will post the difference I’ll meet with the 272 asap.

ok, so in W1zard.312q exam E has 104 questions totally different from the p4s272, exams ABCD are the same as in p4s272 minus 64 questions. But within these 104 none is like those 3 above.
I’m too tired to check the 802 tonight…

I know cisco changed their CCNA Wireless exams as of this past Monday. They may have changed the ICND2 as well. I took the CCNA Voice exam this past Monday and did not see new questions there. It could simply be a roll out of a new exam….. If it is I’m sure new dumps will hit the street quickly. Keep your eyes peeled for P4S… When I was doing ICND1 cisco changed the exam and p4s updated the same week.

Good luck guys.

heh, yeah, I had the same bad timing with p4s and ICND1 a few weeks ago…didn’t recognize but 10 questions or so…. it would be nice to expect the same questions we’re paying money to see and study… lol… braindumps for MCSE back in 2000…the good ole days.

@CW yeah, maybe nerves during the test…. as soon as I realized I wasn’t going to pass FOR SURE I may have been stricken with clicky finger…the answer is mostly add a gateway, dual stacking, and the interfaces are on different subnets, if I saw that answer I chose it…otherwise it was A, C and D… never none of the above except for none of the devices.

Ramius always turns to port in the bottom half of the hour.

darn …Just when I thought we have it nailed…lets check what the other test takers
have to say

https://www.9tut.net/icnd2/icnd2-labsim/vtp-configuration-sim
https://www.9tut.net/icnd2/icnd2-drag-and-drop-questions-2 ( q3)
https://www.9tut.net/icnd2/icnd2-operations (q1)
http://www.9tut.com/ccna-hotspot-questions ( frame relay )
http://www.9tut.com/ccna-ipv6 (q4) and also (q2)
http://www.9tut.com/ccna-troubleshooting-2 (q3) and (q4)
http://www.9tut.com/ccna-access-list (q2)
http://www.9tut.com/ccna-eigrp-questions (q1)

i got this questions in exam

Just comeback from exam
And yes cisco changed test dump is invalid(20% valid)
I passed with 920 although I’m CCNP certified I tell you the truth I passed cause I know cisco well.
I needed higher score for CCSI instructor I am planning to be so I am good now.
So guys understand the concepts and you’ll pass.
I had VTP sim with switch management ip 192.168.199.194 255.255.255.224 and default gateway 192.168.199.193 and assign the first AVAILABLE address in the management subnet, Cisco is trying to trick you here because its belongs to 192.168.199.192 subnet
so first address is 192.168.199.193 which is default gateway, so you need to assign 192.168.199.195.
Also there were those 3 questions that CW posted.

Oh yeah I lost bunch of points on frame relay q’s cause I don’t deal with it in real life

Took it on friday, was scoring 90% on my p4s, did not pass. I pnly saw 7 or 8 questions out of 40 from the p4s.

my VTP sim asked me for the last available IP address of the management subnet.

i have scheduled my exam for 1/31 to give me a few extra days to study the material more. It seems as if Cisco has changed the exams and i dont feel so strongly about chancing failure. So guys tell us of any changes or any points of interest because I would really appreciate any guidance.

Thanks to all who provide feedback and comments. This site is awesome.

p4s email:

Yes, we are expecting a big change tomorrow. Please keep look our website for this change

email from me to p4s:

On 9tut.net / com a few more people are claiming large changes with only a few of this versions questions on the 640-816. I found the questions I did not have in exam notes for 640-802 CCNA test…..

Is there an estimated time of update? Less than 7 days?

.

@TestICND2…. well it sucks they changed right when you guys was testing… but at least P4S is updating! After the update, get it down quickly and get to the test center before it changes again!

Good Luck!