Share your ICND2 Experience

Just scored an 804 on the ICND2 and I needed an 825. My question is how many questions you think I missed the 825 by. I know the sims and drag/drop weigh more, but as far as multiple choice.

One other point I may add to test takers is I had a mouse in the testing center that had a scrolling wheel that I instinctively would use to scroll the page down, and half way through the test I realized that at times it was scrolling my multiple choice answers to different answer. So, I am not sure how many previously answered questions that may have affected.

@Xallax, Please I need the password to open the exemple

@Xallax, Please I need the password to open the vce pratice question you sent

do not spam this page please, thank you
you do not require the password to use the VCE, simply open it with Visual CertExam Manager

Hi Guys,

Just passed my ICND2 with 902/1000. A big thanks to xallax for the vce’s. A lot better than some of the other ones I have seen. Thanks also 9tut! Great materials

Some tips:
1) This exam is quite intense. I finished with 13 minutes to spare but could see if you spent to long on a question you would be in trouble

2) Most of the stuff here on 9tut is either nearly direclty on the exam – or very close too. AFAIR almost all sims were the same.

3) There are some questions that I have not seen ANYWHERE in my preps (practice exams, videos, etc)…be prepared to know some topics (I think mainly routing) in very thorough detail.

4) Write out a subnet plan at the start. List CIDR’s and corresponding decimals, wildcards, etc

Good luck all.

CCNP Switch time now

Passed today, exam is tough, and you will encounter questions you haven’t seen anywhere before. This site is a great tool towards learning the topics covered, but memorizing answers will not be enough to pass. Understan the concepts behind the questions and you shouldn’t have any problems. Good luck all, and thanks 9tut! Was definitely my best/most accurate study resource…

Hi Folks!

I stumbled across this site about two weeks ago (I wish I had seen it earlier)!!!

I just wanted to share my experience with you all – hoping that someone is going to benefit. I’ve just re-certified my CCNA today (passed the ICND2). I’ve tried to remember as many questions as I can, i’ll post them at the end of this post.

IMO the CCNA is one of the hardest Cisco exams you will sit (obviously excluding the CCIE work) due to the sheer breadth of topics that you cover. Every other level (R&S, Security or VoIP) is very specific and focused when it comes to testing.

My last rant is concerning the way Cisco seem to mess around with their certification paths, they seem to have given them some stability now, with the CCNP being split across VoIP and security. Replacing the CCVP and CCSP. I started to do my CCVP after I passed the CCNA back in 08, however the sheer number of exams (including an additional CCNA Voice) put me off. However i’m going to pick it up again now.

Anyways enough of my rant, here are the questions I can remember from today:

Port Security Q1
https://www.9tut.net/icnd2/icnd2-operations

Subnetting Q1
http://www.9tut.com/ccna-drag-and-drop-questions

Ipv6 Q4 + Q5
http://www.9tut.com/ccna-ipv6

Drag and Drop Q1

http://www.9tut.com/ccna-drag-and-drop-3

Drag and Drop Q4

http://www.9tut.com/ccna-drag-and-drop-4

Frame-Relay Q4

http://www.9tut.com/ccna-hotspot-questions

VTP

https://www.9tut.net/icnd2/icnd2-labsim/vtp-configuration-sim

OSPF Q1 + Q2

https://www.9tut.net/icnd2/ospf-questions

Good luck everyone!!

Just open it with Visual CertExam Manager. no password requiered

Hi xallax,

Thanks for your set of VCE questions, very helpful and lots of useful explanations. I have my exam booked for next week. One thing I would request you to change is the drag and drop question answers, the correct answers are just shown, but there is no way to see which was the answer corresponds to what, all you really see are the answers.

Also is it ok guys if I post any questions I would like answers to here? There are some I came across that don’t have an explanation and I can’t figure out why I have the wrong answer.

Thanks….

Ok then, first question… Q F30… can someone explain the answers for the Frame relay question… It mentions DLCI 10, but where on the show command output does it display DLCI of 10? And the other answer is talking about Frame relay “switch”, isn’t frame relay a routing protocol, where does switch come from?

Ok will ask other questions as I see them again.. Thanks

came upon this:
“As we can see, the router has sent 61 messages, but received back none.
We also know that DLCI 0 is used as this is the LMI DLCI used in ANSI. If the LMI type had been Cisco, the DLCI used is 1023.”
got this from and ActualTest pdf uploaded on scribd.
link: http://www.scribd.com/doc/51797738/448/QUESTION-NO-448

frame relay switches…
“Frame Relay switches create virtual circuits to connect remote LANs to a WAN.”
got this from http://en.wikipedia.org/wiki/Frame_Relay

thank you for asking

********

as for the drag and drops… one solution would be to have the definition on top of an empty box where you could drag the answer. yes, it would look better, but that is not what you get on the exam. i hope i understood your question correctly on this.

Just pass ICND2 today(2nd attempt) – 874.I have use xallax and hmaisetr dumps = valid 90%.Always getting about 5-8 completely new questions.Dont remember exactly any of them , to stressed.(NAT,drag and drop) Generally please don’t memorize questions , learn the concept.9tut = VTP sim and Sim with frame relay questions.(is in the dumps)Good look for everyone!

Just passed my icnd2 ,had 930. Sim were vtp, ospf and frame relay. But de dlci and ip add.s were deff.+ some new ipV6 questions not on dis site. Thanks to God, 9tut and xaLlax. The only advice I have is don’t master the dumps, master de concept and use de

Just passed ICND2 today.

Needed 825 and managed 837 (phew)

On the sick for the last 3 days so was debating if I should or shouldn’t put the exam back.
Decided to give it a go anyway.

Did the official Cisco course (crap) , CBT Nuggets (good), and Xallax (Thank you).

Had the VTP / OSPF Sim. A few questions that caught me out . Not that they are hard but during the training the answers (I don’t think) have been covered.

i.e

Host A Router 1 Router 2 Router 3 Host B

Q1) What is the TTL for a ping from Host A to Host B

Thinking about going through the ICND1 and ICND2 study material again, without any pressure of exams to make sure I totally understand it before the next one.

Looking to skill-up on the ASA’s for the next exam (whats the best exam to take) ?

ICND2 practice questions 1.0943
http://www.mediafire.com/?rcaxhv3bxxp2ivh

ICND2 practice questions (Wendell Odom’s book) v1.03
http://www.mediafire.com/?v85i9yaiqa5i2we

Het xallax are the best exams A and D?

i’d suggest you go through all of them

xallax,

Thanks for your effort appreciated..!! am writing my ICND2 in next 2 weeks, and am sure this will help me a lot!! thanks again

After struggling with the ICND2 in the past, I would like to thank everyone here for the wealth of information this site provides. I passed with an 849. This is my second time as a CCNA, since I let my initial certification expire. Im not good at recalling questions, but here is what I can tell you:

VTP Sim, same as on this site.
OSPF simlet where you had to answer several questions about the topology
Frame Relay Simlet, same as on this site

IPV6 addressing questions and what types of Tunnels are there for IPV6

LOTS of VLSM and Summarization

I used CCNA Study Guide by Odom CBT Nuggets, and TrainSignal. I had P4S and several VCE’s from this site, but did not rely on them.

On to CCNP . . . . .

As far as I know, there’s only 3 sims for 640-816..which are vtp, ospf and nat right ?

Eigrp is only in 640-802 composite exam, is it ?

pls advice!

and what is kind of questions is “simlet” ? i dont understand…
is it a kind of which u find the answers for the questions in simulation ?

i mean like go to CLI and find the answers for the questions..

@finally

farme relay simlet means.. the Dubai, and all those router one ?

hav to access to cli to find out the answers ?

Finally…
Kudos!
Jonas… So let = Sim Question – which may include CLI and/or drag& drop…

Jonas – sorry -spell check got me
Simlet = Sim Question

Hey guys, is ICND2 practice questions 1.0943 the best dump for study right now? or is there better ones on EC? I have study the wendell odom book and have my exam in 5 days and stressing!

Hamster
1.0943 is a hybrid of sorts and was morphed from 2 of the best VCE’s from about 6 months ago. It was broke out into separate sections inside the VCE and cleaned up about 3 months ago and has been refined again by members studying like you. I would not depend upon this to pass 100% but would use this as a help to identify your weak areas. Wendell’s book is always the source but the VCE will prep you for the exam experience. Also go over the 9tut sims and read through the last 3 pages of comments here to understand what you will be expected to know.

any1 who recently took the exam can tell me..what kind of ipv6 questions r there ? i mean the address part.. just like choose the which ones r correct ipv6 add and which one are unicast, multicast or anycast.. ?

i’m taking exam on 22th..still having problem wif ipv6 🙁

Am writing on 1st of August, please advice thanks…!

@Jonas

Simlets are where you log into a router/switch and run commands to answer several questions. Frame Relay was one and I believe it was 7 questions total. OSPF was the other and I believe there were 4 in it. So as you can see, 43 questions is not exactly 43 🙂

@Jonas

Also, the IPv6 questions I got were the 3 tunneling types (6to4, ISATAP, Torredo), and which addresses from a list were valid IPv6 Addresses.

@ finally, thx for the info

taking the exam 2mrw… so far…ipv6 is my weak area..need to polish up

Just passed with a 902, before 9tut I scored a 620. The tunneling question. a lot of nat questions. I got icnd2 vtp sim and the frame relay sim which is on the ccna hot spot on 9tut. Know the concepts cause many questions were tweak slightly.

Just hit icnd2 n pass with 920, got vtp sim, frame relay hotspot the dubai one,
also got similar vtp hotspot from ccna…but easier than that…
most of the new questions are wan n lan one… verry basic question… have to answer the ques based on interface status…also got one acl ques mixed with route summerization, given three acl like
Deny tcp 192.168.14.0 0.0.0.255 any eq 8p
……………192.168.15.0……
…………………………16.0

Have to choose single acl statement that accommplished the goal of above statement…

Jonas,
Congratulation & Celebration

Which VTP sim did you had for Exam ?? Thanks

@ As6ar this vtp sim https://www.9tut.net/category/icnd2/icnd2-labsim

https://www.9tut.net/icnd2/stp-questions Q2, Q3, Q5

https://www.9tut.net/icnd2/eigrp-questions Q1

https://www.9tut.net/icnd2/eigrp-questions-2 Q8

https://www.9tut.net/icnd2/ospf-questions Q1, Q2

http://www.9tut.com/category/ccna-lab-sim CCNA VTP SIM Question (similar to that but easier, just refer to the exhibit..no need to access cli

http://www.9tut.com/ccna-access-list Q4\

http://www.9tut.com/ccna-ospf-questions Q6

http://www.9tut.com/ccna-hotspot-questions Q5 (totally the same, in exam Q1 is with 172.30.4.4, actually its 172.30.0.4, dont get nervous by that)

http://www.9tut.com/ccna-ipv6 Q5, Q6

http://www.9tut.com/ccna-ipv6 Q3

above r all i could remembered… materials i used to study are wendell book, cbt nuggets and xallax vce and off cause THIS WEBSITE!!!

Wish u all for best!! off to CCNP now 🙂

@As6ar https://www.9tut.net/category/icnd2/icnd2-labsim
http://www.9tut.com/ CCNA VTP SIM Question.. similar to that but alot easier.. juist need to see the exhibit and answer the ques..no need to access cli

FR dubai one is totally the same!

O.O i tot my previous long post wasnt posted!! :S

Jonas,

Was Posted, but i was like looking for more information .. anyways thanks 🙂

Arigato gozaimasu Sir Xallax and 9tut for the info regarding CCNP. Maybe you could provide some links where I can get those materials for free? ^_^
Is CBT Nuggets good enough as a reference material for studying CCNP Route?

there souldnt be any links to illegal material posted here. the site would get closed otherwise.
still… try adding “torrent” as a key word when searching for those books via a search engine

@Rogue Scout: For CCNP ROUTE please visit http://www.digitaltut.com you will find all the information you need there, including recommended books & video trainings.

Jonas,

Thanks for all your information, Appreciated and good Luck for your CCNP Track.. see you soon ther as well 🙂

Going to take the exam tomorrow morning…. been preparing from 9tut and Xallax VCE… stressing like crazy but I feel though I should pass… hopefully :S ill keep posted

Good luck JA! I take mine next week so sure I will feel like you closer to test date. Let us know how you do.

Xallax and 9tut thanks a lot for the assistance. I passed my ICND2 yesterday, just barely got a 832, passing mark 825. phew!

I got both the CCNA VTP Sim and Frame Relay Sims both, exactly the same, and the same x.x.4.4 and x.x.0.4 network add typo.

Got a lot of new ACL questions, unfortunately I can’t remember then. But like people here stress, know the concepts, and you should be able to answer them easily. I also some drag and drops, exactly the same as the ones in xallax’s VCE.

Thanks.
Moe

Hello Mojo,
Thanks for the info, just one question,
which one is the Frame Relay Sim?I can see the vtp but not frame-relay.
do you have the link? I cannot find that sim here?
Does anyone else know?
Thanks

been using pass4sure but tut9 has explanations which is key to understanding the ?. I failed the first time with a 734, but more confident now using tut. Packet tracer is also helpful simulating the actual commands. I’ll be ready on Monday!! I got 3-4 ipv6 questions on last test. One was one i never saw on pass4sure or tut. I saw vtp sim lab and sh-frame relay. Hopefully i’ll get those again. thanks tut

@cabbage patch kid

what was the ipv6 question that you had not seen before.

i vagely remember but its (What type of device transmits IPV6 signals across a network?)

The other IPV6 questions on tut match the ones i saw on the test. Although i heard the IPV6 is removed. Whats up. Do they make different versions of this test. To all the folks who failed the first time. Did you get the same questions the second time around? HELP!!

I know 100% for sure each test is different there may be some questions that are the same but the overall exam is always different.

Failed the test with a 742!!!
Most of the question are here an there on 9tut.com
The VTP Sim question got me…
sw1sw0
Sw1
Vtp status …domain name: center.
IP GW. 192.168.166.129
255.255.255.224
Use last usable IP addresses.

Hi guys,

Good news passed with a 930/1000 score, I must admit the test was extremly hard.. and when I finished and had not seen my results I was about 90% sure that I had failed. I am still in shock to see I got a 930 score…. I aced the VTP and Frame-relay sim though thanks to 9tut. There was about 2-3 times in the test where I just blanked out felt like walking out because I wasnt going to finish on time.. but I ended up finishing with 15 minutes to spare.
(Stay calm people but keep in mind you need to think logically and not rush)
I used 9tut and Xallax for preperation, and I remember seeing about 40%-50% of the questions on the exam but modified slightly, so basically if you do not study and just cram dumps you will fail (not to scare people going for the test but its very true).

Now its time for celebration… and a big thanks to all who contributed to creating the latest dumps and also the king “9tut”, your helping alot of people out there and I have lots of respect my friend.

JA,

Congrats,

Can you remember which VTP and Frame Relay sim you had, as compare to 9tut site sim. your input is appreciated.

I missed the cut by the skin of my teeth, so to speak … got only 805 🙁

Encountered a lot of questions on ACLs .. especially about Reflexive ACL. dynamic ACL and Time-based ACL … I was caught off-guard on those questions … those Qs ate my time

I had VTP, Frame-relay and OSPF sim which was the same approach as in 9tut, though different given values … got 5 WAN questions (about authentication and encapsulation – another overlooked topics), IPv6, EIGRP, OSPF and RIP questions… and subnetting of course …

back to the books …

and wait any sale voucher in getcertify4less site .. 🙂

hi guys… i did my icnd1 in within a month but..icnd2 took me like 3 months+ to get fully understand…
I have read the book(only wendell book) for 3 times… 1st time i just read…second time take notes..3rd time was like revision.. and off coz i had to refer to the books many time when i did the vce..
and be sure to do all the practical stuffs every time u read the book.
for videos..i watched cbt for unlimited time..lol

my point is..CCNA is not hard seriously!..it just has alot of stuffs to get into ur brain and settle down lol…

and btw..i NVR SEE ANY VPN questions in exam before nor had nvr heard any1 talk about that…

good luck everyone!

972 CCNA score today! Love this site! Study materials:
CBTNuggets = concepts tracks ICND 1\2 Watched them all twice!
9tut = SIMS
Cisco practice exams\questions

I am so relieved! ACL, Frame Relay, Sim, WAN, NAT, route paths is what I can share per my experience! Only a few IPv6 questions….
Good luck to all! Hope this site stay online forever!

Getting ready to take this exam next week. Does anyone know the what the most current valid Xallax vce is? Much thanks!

write down sunnet values from /17 to /30 with corresponding binary chart…then you can just reference; also write down sim steps per 9tut…save config and ping afta!!! worth points for sure! could be diff from pass\fail if your score is close!

This Place so Quite..!! Seems like everyone has Passed CCNA….! Not true am not yet Done, Writing after a week,

Xallax
Please any thing after1.0943 latest and gratest, Thanks

What do most of you write down on the dry erase board as soon as you walk into the exam aside from subnetting tables

@CCNASoon, for me…

i write down

128 64 32 16 8 4 2 1
128 192 224 240 248 252 254 255

happy certifying!

I guess
128 64 32 16 8 4 2 1
128 192 224 240 248 252 254 255

is better than
4, 8, 15, 16, 23, 42

Hi As6ar!
I have not done CCNA yet either, so we are the same boat 🙂
I passed ICND1 back in April thanks to 9tut and now I am studying for ICND2.
As study materials I am using CBT Nuggets, Bosom Netsim for labs, Cisco Packet Tracert, and this forum.
I find there is much more material on icnd2 than icnd1! At the moment I am strugling with EIGRP and OSPF, aslo Frame Relay.
I am planning to Sit for early november.
How are you doing with your studies?
Another question is many people talk about a frame relay simulation that I cannot seem to find here, does you or anyone else know which one it is?
Greetings.

Spainvasion,

True..!!
Writing ICND2 on 1Aug 2011
Well Appreantly am doing Pratice Question from 9tut, which has been doing a great work for us and plus Xallax 1.0943 OwO Awesome,
My Study Materials CBT Nuggets, Cisco Packet Tracert ,GNS3 best to Pratice Routing esply for EIGRP,OSPF,Frame Realy etc and Books from CISCO.

About Frame Relay Simulaton as i understand we need to look for information in exhibit. using basic Commands

If your struggling with anything we can discuss, with problem will make a Soultion..!! Cheers

Hi Hi As6ar,
it is nice talking to you, wow 1st of August is one week away only!
Good luck, I wish you the best in the exam.
I will check out Xallax 1.0943 as I have not done it yet.
I have read the tutorials in the ccna site about ospf and eigrp and now I understand it better.
I also need to review nat and access lists.
Do you have work experience with cisco?
I have been a sys admin for a year, I have not work with cisco equipment much but decided to get ccnna certified becacuse I would like to get more involved in network side, since I started studying for ccna I am loving it.
Greetings.

Spainvasion,

********JUST FALL IN LOVE TO ACHIEVE ANYTHING***********

Thanks you very much..!! AM BIT STRESS

yes i do have some experience with real equipment, rest all in PT and GNS3, PT is good for switching and for rest GNS3 BEST this is what i can suggest to feel more real world..!! at this level

Before Cisco’s Exam where all about reading reading.. but now the have changed completely, you please understand the concepts on VTP EIGRP,OSPF NAT ACL Frame Relay basic (How and Why)

Im being in the this field for +- 8 years, companies wont let you do any thing on Cisco equipment once its is operational, so like i said you should work on PT and GNS3.

Xallax vce is last when you understand the concept, please please don’t be rush as you have more time to write your exam, If you find any difficult send me a query, i will help you “AS BEST OF MY KNOWLEDGE” more or less this site is simply Great..!! Cheers

@CCNA Soon,

Yes..its better than wirting down the wildcard bits..as u can easily calculate wildcard bits by 255 – subnet mask

I take this exam tomorrow. Please share any last minute suggestions/tips that you have before I attempt to take the exam. Pass or Fail I will post results and insight. Thanks!!!

What is the OSPF default frequency,in seconds at which cisco router sends hello packet on a Multiaccess network?

A: 10
B: 40
C: 30
D: 20

@ As6ar, answer A: 10 sec

CiscoTroll

Thanks!!

anyone know the latest xallax vce revision number?

Hey As6ar,

can you tell me where you got the GNS3 from

thanks

AKA,

here you go… http://sourceforge.net/projects/gns-3/files/GNS3/0.7.4/GNS3-0.7.4-win32-all-in-one.exe/download

you need to setup GNS3 properly, watch videos on youtube “how to GNS3” cOOL

Hi Guys,

Did somebody ever had a NAT-Sim like this:

https://www.9tut.net/icnd2/icnd2-labsim/nat-sim-question

in the exam?? I´ve only read about VTP & Frame Relay Sims??

At last, barely passed the exam with 832
Learned the vce from xallax the best vce I ever learned, 60% came at the exam but tweaked.
@xallax, thank man

Other ip and asking the last the last available ip. So its important to know subnetting.

Got the Frame-Relay Dubai, VTP ( building) sim, OSPF lab, no need to access the cli
Just refer to the links that Jonas has posted at July 19th, 2011

@ Jonas that was a great help, thanks man.

Got one summarized Q , no VLSM.
Think about 10 -15 new questions.

Learned with CBT Nuggets watch 3 times, Packet Tracer and practise VCE from Xallax.
When I done with the exam I had only 5 minutes left…Pfff

To CCNP !

A lot of questions about ACL and succesors and FD, SPT DESG, FW, LISTINIG, BLOCKING.
4 drag and drop, about security , about the concept of split horizon, poising etc..
Witch Patch a frame wil take , know the AD succesor en FD. The cost of EIGRP, OSPF , C and S

Sorry for the poor English is not my native lang.
I meant “The cost of EIGRP, OSPF , C and S” that you should know when the best the router will take to the destination adres. 🙂

@Ronny did not get any NAT SIM

For the exam takers, learn everything from 9 tut ex. the sims. It wil help you and try to learn the cli in packet tracers, know the concept because the will change WC or SB.

If anybody whants to know something about the exam you can postit today, i will answer your Q

Does anybody know if there is a 9tut for CCNP ?

Passed today with a 948 – vtp + frame relay sim + a lot of frame relay wan questions.

Is it just me, or does the xallax VCE (my revision number 1.094) contain quite a lot of ICND1 questions?!

@Tess – You’ll be suprised what comes up in the ICND2 exam

@ Kells – uh oh, that’s not what I wanted to hear!! Can anyone confirm latest xallax VCE revision number? Thanks

@DBC
Sir could you tell me about drag&drop about security ! and another two, Please.

Pass exam today I’m so, so happy I can breath a little, still need that job!!!!! The exam was very hard, I did not pass ICND2 the first time about a month ago. The second time around was much harder than the first ICND2 exam. I had about 10 questions that I have seen in 9tut LabSim 1 question, 3 drop down and 6 multiple choice in the entire exam. All of the other question I have NOT” seen on any of the dumps, 9tut or Exam Collection. You must understand concept because Cisco does not play that memorization game they want you know how to implement and reason. Thanks 9tut and all who post their experiences, it helped me to study in the right direction.

Pass exam yesterday.
43 questions including 2 sim, 2 drag & drop. lot of questions about EIGRP and sim from 9tut

https://www.9tut.net/icnd2/icnd2-labsim/vtp-configuration-sim#more-129

@DBC: Please have a look at the right-side menu bar (on the top) you will see 9tut pages for CCNP there.

Hello All,
well just to let you know I am watching cbt nuggets for the second time now.
At the moment I am also doing the net boson sim lags for ccna, not bad at all.
I am also doing practice tests.
As6ar!! your exam is next monday, how are you doing with this?
Do you or someone here know the explanation for the answer to this question?
http://www.ccna.examstock.com/?p=757
Thanks in advance

Hello All!!
wow I am shocked, I got this question wrong….
I am starting to think that I am still far from ready to go for the tests even though I am planning to do it in october or november.
I thoguth the right answer for this would be C. Devices will be able to use telnet but not ssh.
Can someone check and explain?
I have reviewed ACLs and still not sure why I got it wrong.
http://www.certprepare.com/forum/lofiversion/index.php?t1182.html

@Spainvasion
question 1:
eigrp has auto-summary on by default. if you take a look at the *show ip protocols* you can see that eigrp is routing for 2 networks on each router: the classful network of 172.16.0.0 and the WAN network (also classful but we don’t care about that, do we?)

now… here’s something from the cbtnuggets videos:
look at *172.16.0.0/16 is a summary, 00:00:03, Null0*
the router will try to send the packets to the most specific destination (the bigger the mask, the better). why? because it can tell that 172.16.0.0/16 doesnt reflect the real connected subnets and it will send all packets that dont match a more specific destination within that address space (172.16.0.0 – 172.16.255.255) to that Null0 interface. Null0 = discard.

questions 2:
as i can see it…
comes from LAN (any port) goes to server (SSH)
comes from server (SSH) goes to LAN (any port)

comes from LAN (telnet) goes to server (any port)
comes from server (any port) goes to LAN (telnet)

there’s a lot of talk there, some guy pointed out that the wildcard was wrong, he was right.
i’d say both telnet and ssh should work. D.

I passed this exam a couple of days ago. The theme is the same as has been posted here previously. 9tut.com labs are awesome and Xallax vce was great. I didn’t feel confident after the test but I managed to passed with a 926. Still the same as stated earlier in that you will not pass if you only memorize. This test is winable. Just stay calm and think everything through. I saw ospf sim, vtp sim, acl drag and drop, routing prot drag and drop, 3 questions on ipv6 And Frame-Relay sim. That’s all I remember. Good luck and thanks for this website!

@Spainvision
more on question 2 here:
https://learningnetwork.cisco.com/message/90373#90373

i’m sticking to D.

@HELP
I got a couple of drag and drops I never saw on 9tut or in the VCE it was something like this:
on the left side: dte, dct, pvc, DHLCI, LMI etc..
on the right side: i am a router, i m a point to point link etc… and you had to drag from left to right.
So for example , you have to drag dte to i m a router , sorry can’t remember a lot any more…party to much afther passing !!
You will have for sure the drag and drop in a topology and dragging the right subnet in to the topology. In the topology there LAN with hostnummers, just calculate out the cidr notation and drag it to the right side.
An other drag and drop was something like this:
on the left side ssh , vty, banner , service password, enable etc..
right side , secure login, privelage mode , remote login etc… forgot the rest. !! sorry

Ipv6 Q see 9tut section about this

@DBC
Thank you so much really this is helpful for me .

Spainvasion,

My preparation going on still 3 days to go Crossed fingers..!! thanks for that 🙂

TIP:-

To better understand protocols like EIGRP OSPF Summary route, Frame Relay etc..
CBT nuggets for CCNA or ICND2 is not enough, since basic concepts are not in depth, what i would like to suggest you…. is you move little bit UP look in CBTnuggets CCNP Track “Route” there are some videos for basic concept like EIGRP, OSPF … etc hope this will help to clear your question just go through and then you tell me 🙂

lastly you have asked a question, our 9tut expert Xallax shown you very very simple way to understand easy..!!

Good Luck for your studies, let doubt coming inn .. experts are Here..!
Cheers..!!

Finally i became a CCNA Yesterday..

Its been a long Journey…

I took CCNA first .. Failed with 81% about a year ago..
I decided to take one at a time and took ICND 1 Passed with 84%
Took ICND2 after 3months Failed Again with 73%
Took the exam yesterday Passed with 88 %

Reason for CCNA Failure: i never knew the existance of 9tut
Reason for ICND2 Failure: i never understood or cared about EIGRP,IPv6,FrameRelay and was not having gud enough speed

I passed ICND2 with 88% with 10mins remaining..
I practiced and practiced with Xallax’s dumps by setting the timer as 60mins.. 😛
Went through the EIGRP,IPv6,FrameRelay CBT again…
The ones that do not have any explanation for Xallax was reffered to Bootcamp

Questions: that i remember
IPv6 around 3 to 5:
which are the ones that are valid ip with 3 off them starting like 2000,2001,2003..etc
which cmd on IPv6 will forward? I HAD NO IDEA.. I DONT THING THATS ON CISCO PRESS EITHER..

Framerelay around 3 to 5 questions all from 9tut or Xallas

RIP:I did not know how to decode debug ip rip command question

ALL THE QUESTIONS ARE REALLY HUGE.. ALL WITH PICTURES AND stuffs..
VALUES ARE CHANGING..

Writing down the values of binary code before the exam on the sheet did help a lot to save time…

All the Best Guys..

Once again 9tut has saved the day.. 🙂