Share your ICND2 Experience

PEACE and i’m not mtgman000. sorry

How many hours a day on average did you spend studying ?

Oh and for how many months ?

~ 2.5 – 3 months/2hrs

Kids, this not a place to a argument on yr personal thing, just place informational information regarding question over here.

1-Hot Spot frame relay sim was in my test yesterday. Someone has this sim ?
2-Subnetting (drag and drop ) with “no ip subnet-zero” . Very dificult.
3-One router conected to SwitchA and SwitchA conected to switchB . Configure in this scenario VTP .Only access to the switches .No way to know the default gateway of Switch A, as show run did not work. Someone told me to use show startup config , or show ip default gateway ?? .

Time is the most importnat factor as well as be able to answer the Sim quickly.

@ McCormack the fighter

show running-config worked for me.. but you could see the IP easily just type : show cdp neighbors detail.. on the connected switch.. I have checked.. just for fun 😉

@TJ

Informational Information 😀 .. that’s a good one LoL

@ McCormack, for 1. all you need is simple ‘show commands’ show fram-relay map’ and you could figure out the answers.

2. Subnetting is the most basic, if you know it, you could answer question in any format.

3. ‘show cdp neighbors details’

I passed icnd2 last week with 955/1000 and I had about 10 minutes left to finish. I had VTP,Frame-relay & OSPF sims/simlets few drag and drops, acl,subnetting,vtp,vlans,stp and other basic questions. I studied wendell odom’s book, practiced on real hardware (Packet tracer is also enough) and I spent about 3-4 days going through 9 TUT. easy exam if you learn. It will take you less time to learn than to attempt memorizing thousands of dumps.

if you or anyone need any help my e-mail is gc_enquiry@yahoo.com

thank you

Has anyone sat the exam in the past few days can anyone tell me how accurate the dumps are a lot of people on exam collection are saying Cisco have just changed there question pool. I have been revising for quite a while not just from dumps but I have to admit I am not the best exam taker in the world and do to an extent rely on the dumps (I know its cheating by the way)

Any chance I can get the latest Dump for the ICND2 exam? tia

practice questions on
http://www.ciscovce.com

@ McCormack, if you are looking for the Frame Relay Sim, go to the 9tut 802 web site. Click on the Hot Spot tab, it is the second one down. This one is exactly like the one on the test I took, except it used a different DLCI number on question one and it had a typo on question 2 on the ip address. The question ask you about ip address 172.30.4.4 and the show frame-relay map command you see the ip address is 172.30.0.4.

please share the latest dump for ICND2. ccnawannabe@yahoo.com thanks in advance.

Hi ALL,

Had an icnd2 exam today. Thanks a lot to 9tut and 486 VCE. SIMS are VTP, Frame relay and OSPF. All questions are from 486 VCE.

Thanks again to 9tut.

Price changed…for me after couple hours of payment :(( omg I am so “lucky” now 180 $ ICND2

Hi scorpion congrats! what is the 486 vce? Thanks!!!!

So I passed the exam yesterday I found it easy after reading 9tut and doing xallax vce the vce is still valid I had been reading on exam collection that Cisco had changed there question pool I will say that there was questions on VPNs which you can see if you download a up to date vce from the CCNA section of exam collection. The CCNA Vces seem to be updated more often granted you have to go though more questions but that way you will probably see 95% of these questions on your exam.

I thought I would give you my opinion on using dumps I guess most of you if not all of you are if you are using this site then you are ok with using dumps . I have used dumps for both of my exams and would say that I recognised about 95 % of the questions on each exam. Its weird because when I came out of doing my second exam and become a CCNA it did feel a bit hollow as doing dumps is cheating obviously I have no problems with using dumps and others using dumps and I often see people writing on here that you must know the concepts to pass the exam honestly I think you could probably pass by just using dumps however this would be bad practice for the real world and if you get a job using your Cisco certification you will likely not be able to do the job properly and will be found out quite quickly you should still take the time to learn the material.

Special thanks to 9tut and xallax not just for the Vce but the time they take to contribute to this section of the web site

Ha ha just reading over my above post cant believe I used the line doing dumps lol

Hello Snooy…tell in detail about questions!!what kind of questions ,sims etc you have had on you exam

@IV

I had the VTP,Frame-relay & OSPF as for the indavidual questions http://www.Examcollection.com is your best bet

Took the test today and got 910. There was a lot of questions on IPv6. Had VTP Sim, Frame Relay and OSPF Simlets.You Need to try and understand the concepts in that case no matter how the questions are twisted you will be fine.I used CBT nuggets and CCNA Fast Pass by Todd Lammle. With dumps I used actual test.

Also try and readd the test books.

my congratulations JSimm!! can you send me actual test coz i am about to take a test very soon

Passed my ICND 2 today, on the 3rd try. Had the VTP sim, the frame relay sim from the CCNA section. I went through both ICND2 and CCNA questions but quiet a few new questions came out that are not on this site about 40%.

Passed my ICND2 today, on the first try, VTP sim, frame relay sim, ospf sim went thru 9tut and vce. Thanks to this site, I was sooooo nervous, theory is key. I will post questions as I remember them.
Thanks again to 9tut, and everyone who participates.

i can’t found any frame relay sim. some one help me. where i can find it on this site

Hi any one have latest dumps or test information share me if possible ,thanks in advance , i am going to give it on 24 jan . maji905@aol.com

did anyone have Sim about NAT , EIGRP, ACL?????????? coz as far as i got Frame Relay, VTP ,OSPF it was as Sims on ICND2 exam!!

Passed ICND2, mostly same question as in VCE, some new (modification), some IPv6, how to enable logging to remote location. Some IOS command. SIM: VTP (vlan1 down/down-no way how to bring it up), frame relay, ospf, some ACL. GL

can any tell about acl question in exam

ACL: nothing hard, no configuration, you have to know order of proccessing ACL and rules for ACL (many times its tricky q)-eg: 1st rule:permit any any and then deny x eq 23=allowing all…

you had ACL as a SIm or you meant about just question

where do we get this 486 vce?

@ hun
http://www.examcollection.com

anyone has the latest dumps? please share with me. thanks. ccnawannabe@yahoo.com

Took exam yesterday… I had Frame Relay Sim, and VTP Sim. IPv6 questions such as which is link local address: FF80, and which is one-to-closest: anycast. OSPF questions were from this site . Telnet question such as what will no login command do: deny telnet access. I had question number 1 in Operations from this site. I had a question were we had to choose the addresses that can use /24 with no subnet zero. about 3 drag and drops all were from this site. Thats all i can think of for now, hope this helps.

i can’t found any frame relay sim. some one help me. where i can find it on this site

@Iv: just questions

Hey….i am about to give ICND1 in coming week..

can somebody confirm me that whether cisco exam engine allows to skip question at a moment and return back later to it to answer it or not???

@Saurabh: once you skip a question you cannot return to it.

i believe it is time for FREE CERTIFICATION FOUNDATION. free software foundation was created long time ago.

hey guys hows everyone doing. I just attained the icnd1 cert 2wks ago. I’m new to this site. I’m going to be taking im the icnd2 next week and i was wondering if someone could hook me up with the latest dumps. I went through all the question on this site and boson exam environment. My email is rizo477@yahoo.com. Please help.

I was also wanting to know for the guys that have recently attained icnd2 if they noticed any similarities in the questions on this site.

@BigJohn go to the 9tut 802 site, click on the Hotspot tab. The Frame relay is the second one down.

thanks harold are there any other labs or questions that you can think of that i should look out for. Please e-mail it to me i really appreciate it.

Passed ICND2 today, VTP sim, frame-relay simlet which one question needed the show ip route then deduce which dlci’s needed. subnetting drag & drop which is easy if you know.

@harold Thanks alot.

VTP sim, Frame-Relay sim, ACL/NAT sim and all drag & down Q’s from 9tut.net and 9tut.com

i don’t remember the exact questions but DSLAM, IPv6 anycast, OSPF link state show command related questions were there.

will post questions as soon as i clear my brain. it’s all messed. lol

you just can’t go wrong with 9tut.

Just a quick question to the people who have sat ICND2 recently. In the Frame Relay SIM were you aloud to use the show running-config command as a few people have said it was disabled

yes. show run was available. there were 3-4 Q’s regarding frame-relay show command.

#show frame-relay pvc
#show frame-relay map to find out dlci

point-to-point frame-relay Q was there too..

#frame-relay interface-dlci 120 (can’t think of exact phasing of it but study those output and commands)

define “service password-encryption”… (choices were pretty tricky)

cheers bud thanks for the reply how many IPV6 were there

Passed ICND2 Exam today. Alhamthulillah….
Thanks for 9tut, CBT Nuggets, Xallax, Masthi and Collisio VCE. Lot of new question, VTP Simulation, different types of Drag&Drop, Subnetting(Drag&Drop) to find the IP addresses for all interfaces, IPv6 question, etc…. Thanks to All……

How many questions did you get and how much time did they give you? I think I can pass this exam, but the time factor concerns me the most.

@CCNA2012, I sat this exam yesterday and failed by about 2 or 3 questions (really annoying!)
It was 43 questions and you get 75 mins only.
You really need to keep an eye on the clock (always visible in top right corner)
Make sure you spend no more that about 10 mins on any simulations…

47 questions in 75 mins. 3 d&d’s, 3 sims. each sims come with timer. you got to study IPv6 in detail. i had like 3 general IPv6 Q’s and 3 IPv6 configuration Q’s.

glad i finally passed after failed three times since Nov. i got 912.

what kind of New questions u had on your exams, guys ….???

Congrats Neil!
To Annonymous… I understand My Friend! I failed the previous version of the CCNA ICND2 exam in 2005 by 5 points! I was very upset about failing by a measly 5 freeking points! I would rather fail by 250 and know that I got my ass kicked than to be so close and miss by 5 points! lol! I ran out of time at the end of the exam and had to speed thru the last 4-5 questions. Thanks for your input Annonymous and Neil.

It looks they are putting more IPv6 stuff on the ICND2 test. I wondered whether Cisco would start doing that more and more with the proliferation of IPv6 becoming more and more prevalent. I haven’t paid a lot of attention to IPv6 except the very basics, will have to do some practice labs on IPv6 and get comfortable with it before I sit the ICND2 exam in a week or so.

To all those who Endeavor, best of luck My Friends!

Hello everyone, Passed my ICND 1 last month and have been studying very hard for ICND2, I have a lot riding on me passing this test. I have gone through the questions on this site but I heard that Cisco recently updated their question pool for this test. I would be very thankful if anyone could send me any of the latest dumps, info , tips advice etc to Pete_Shaw@live.com..

Thank you very much in advance

@JD the show running-config command did not work on my Frame-relay question. I used the show ip interface s/0, s/1, etc. The second question had a typo in it. The question ask about ip address 172.30.4.4 and the show frame- relay command show the ip address as 172.30.0.4.

Passed ICND2 today with score of 888. I had VTP sim and Frame Relay sim. I feel I lucked out because I didn’t have any complicated drag and drops or tough, ccnp level EIGRP questions. I would suggest studying the CCNA site (9tut.com) as well as the questions here, even though they mostly overlap. I suggest this because the lack of information on 9tut.net and the fact that the ICND2 is basically the CCNA.

I also spent a lot of my time studying the 486 CCNA and xallax 816 vce’s, all of the CBTNuggets CCNA package and referred to the CCNP Route and Switch packages for some of the high level questions Cisco slips in (determining feasible successor from EIGRP topology table, router DR/BDR election and other loose ends). PacketTracer was used mostly for the hands on stuff. Good luck!

Passed exam today 872. 4

frame relay and VTP. Alot of 1PV6 questions. Alot of NAT and ACL. 80% New questions

@Harold: Its NOT about typo, its correct, beleive me. Trick is in routing, if you will check sh ip route then 172.30.4.4 points to 172.30.0.4 ;)..had twice this q 😉

Please can someone send me the Frame relay sim for the ICND2 at jlouissaint@haitipaesj.org
thank you in advance ….

@Harold: Its NOT about typo, its correct, beleive me. Trick is in routing, if you will check sh ip route then 172.30.4.4 points to 172.30.0.4 ..had twice this q
Cisco – where is this going with this question? – is there something here on 9tut that is close to this question?

Xallax good evening. I received the link to your website that you gave me for the icnd2 dumps and purchased the practice exams. I was just wondering if those exams are up-to-date. And is the wendell odom test that comes with the package from the book or is it from the boson site. Thanks man.

@devildog
i update the questions as soon as something changes on 9tut.net/9tut.com
the wendell odom questions are from the book

thanks for asking, have a nice sunday

thanks xallax for your immediate response. Have you received any good feedback this month on your icnd2 test prep material. and if you don’t mind can i email you if i have any question on how to use the packet tracer labs from your study material. I have been using routersim.

Took ICND2 today and passed with 944! Every single question I had came from either 9tuts CCNA pool of questions or their ICND2 pool of questions on their site, although the majority of my questions came from the CCNA portion so make sure you study both sites. Also, know your theory because if you just memorize dumps and can’t apply it on the job then you won’t keep a job very long. I only had one SIM to do which was the VTP sim. I had the Frame Relay Simlet and a couple of Drag and Drops. The rest were just questions from these sites. It was not near as hard as I was expecting after studying for the last 6 months. I think I over prepared but it paid off for me. I finished the test and still had about 25 minutes to spare. These are the questions I had and what sections they came from on 9tut.

CCNA-Cisco IOS Questions #1 #3 #5 — CCNA-Cisco IOS Questions 2 #2 #10
CCNA- Show Command Questions #7 –CCNA- WAN #1 –CCNA-IP Routing Questions 2 #10
CCNA-RIP Questions #13 –CCNA-OSPF Questions #4 #6 –CCNA-OSPF Questions 2 #2 #6
CCNA-EIGRP Questions #1 #2 –CCNA-Security Questions #2 #5 #10
CCNA-NAT and PAT Questions #4 –CCNA-Drag and Drop 1 #1 #4
CCNA-Drag and Drop 4 #2 –CCNA-Switch Questions #10 #12 #13
CCNA-Hotspot Frame Relay Simlet –CCNA-STP Questions #1 –CCNA-STP Questions 2 #5
CCNA-IPV6 Questions #7 –CCNA-Subnetting #3 –CCNA-Subnetting Questions 4 #1
CCNA-Operations 1 #5 #12 –CCNA-Troubleshooting 1 #6
ICND2 Labsim VTP Configuration –ICND2-VTP&VLAN Questions #5
ICND2-EIGRP Questions #6 –ICND2-EIGRP 2 #6 #7 –ICND2-OSPF #1 #2
INCD2-OSPF Questions 2 #2 #3 #5 #9 #12

Study Material:
8 Years of on the job experience
5 Week CCNA course at local Vocational School
Wendell Odem Books
Chris Bryant http://www.thebryantadvantage.com/ and also his Youtube channel
VCE’s
9tut

thanks for your contribution WKC. congrats on passing the test. What’s next? ccnp?

Either CCNP or CCNA Voice or Wireless, definitely going to take a break for a few weeks. I’m tired of studying!

I Passed on Friday with a 902 and 4 minutes left. This was my second attempt (ref. Dec 20th post 760). The VTP and Frame Relay were on there as expected. I cannot add more detail than WKC, his questions were spread out over categories about the same as mine. But I had more IPv6 questions, to many damn IPv6 questions. plus i had four acl.

For IPv6 you have to go to the main CCNA (not ICND) page and look up IPv6
IPv6, know multicast, global, local
Know IPv6 tunneling
examples of valid address (funny enough it had the “2003:dead:beef:4dad:23:46:bb:101”, exactly
-You need to know at least every question on that page, or at least I did–

Two acls were about stopping access to http.
One acl was about preventing vty aka, access-class
One acl was about the order, four statements and they had to be in the correct permit deny permit permit

Both test I took had the VTP and Frame Relay (had a network address typo, don’t let it slow you down)
the “make best use of subnetting” question -its in .vce take one subnet for x#host, x#hosts, etc. there will be —-two /30, one is the network address.
OSPF digram Question One and Two – different answer.
VLAN question one under hotspot

from advice perspective, WGC is right on. 9tut (especially the sims), the book and VCE are critical. You will find a form of the questions from the vce on 80-90% of the questions. but the answers will be twisted slightly and you must know the theory (in my opinion). I think thats why some people come back with the statement “a lot of” new questions.

Also, you need to take your time on the sims. I think they are worth about a 100 pts each (xallax ??). I think a bumbling mistake on a sim may have cost me a pass on the first exam.

Good Luck all

another thought on taking you time- I believe these sadistic bastards due this trick on purpose. In two questions the answer was “three” for example switch three. and the multiple choice was

switch one
switch two
switch four
switch three

I hit four, knowing it was three and almost went to the next question, it was like that twice on the test

define “service password-encryption”… (choices were pretty tricky)

this was on the test also, it encrypts plain text passwords.

Hag. My test had 10 IPV6 questions that weren’t on this site so there were “alot of new questions”

@devildog
contact me at contact@ciscovce.com
i will happily answer your questions

@hag
nobody knows how the questions/sims are scored. that’s one of cisco’s secrets 🙂

JD Can you share with us any exact questions from your exam??

Took the ICDN2 yesterday and passed.My advice is : study hard and try to know all the concepts very well . I used Cisco ICDN2 book from W.O. and also W.O simulation package that I bought for a price under $100. Almost everything was here but is not enought to study using this site .You have to use books and simulations tools .Also I bought Boson, and 9tut. Studid for 6 months and got my CCNA finally !!!

What kind of IPv6 questions are they asking? Do they go in depth on the IPv6 questions? Config IPv6 on an interface? RIPng config? Stateful vs Stateless host config? etc

Thanks in advance

I sat for the ICND2 exam for the second time on 1/28 and I passed it. The first time the computer froze and I got 776 this time I got 876!!! I had a couple ipv6 basic questions, acl questions, 3 drag and drops, frame relay sim on here, nat sim on here. I can’t recall them all right now but I will let you know when I do. You should definitely know the materials and practice with the simulators repeatedly. I had 4 minutes left when I was done. Good luck everyone and thanks to 9tut!!

took and passed the ICND2 this morining. I noticed alot of questions on this site and the ccna site were similiar to the ones on the exam. It was tough. There were a lot of new questions. I only had 3 ipv6 questions. I can say that if you study todd lammies book and use xallax vces its enough to pass. xallax I just want to say that I appreciate it buddy. When I think of any questions that i saw on the test I will post them.

Hi all,
if some1 has the ICND2 exam dump please email it to me at spirit.986@live.com, I am planning to take the exam next week
Thanks

i’m planning to take exam Thursday can someone send me new question about ICND2 please email me at jlouissaint@haitipaesj.org…..

Can you guys, please, send me the latest dumps for ICND2
have an exam on Feb 13rd. my email is ahmenter@yahoo.co.uk

Thnx

Just failed an abosultuley horendous exam. i had VTP lab and another lab but i got so confused with it i cant even describe it. i’ve seen part of it on this website somwhere and when i get my head together i will have a look. Using this site, cisco and Exam cram i didnt feel ready but when do you ever. Walking in i expected to at least squeak through but getting 720 was somthing i wasnt expecting and put it down to this one simlet. I couldnt answere any of the questions. a few questions from this site helped me save time. Another questions i do recall. went somthing like this. Which two of the following can be changed in order to change the ospf priority. Bandwidth, cost, router id, Clock speed. This questions really through me.

I pass today 846/1000 new question on IPV6, frame relay sim, acl sim, vtp sim ….

thank you Xallax for your support ….thank you guys on the 9tut….

Hey all, great site – really helpful advice and discussion. Can’t seem to find the latest .vce though for ICND2! can anyone help me out please? Took exam last week and failed, but had most of what is described on this site. Doing again next week! Cheers all

simonmills2000@btinternet.com

Ah man, this exam sounds tough! I passed ICND1 first time in August last year and i’ve been studying for this ICND2 since but only half heartedly. Just finished watching the last CBTbnugget vid on IPV6 and it made little sense. Going to watch them again from the start and read the Wendell Odom book at the same time… can see this taking a lot longer to complete as i’m working full time also.

Passed 930/1000 this morning. 43 questions and 75 min. Had a vtp config sim, frame-relay sim, several acl, and about 4-5 ipv6 questions, mostly asking for valid ipv6 addresses and Ripng. Exam was hard but fair. I think some questions may not have been graded? Cisco does say they might have those on the exam. Scored higher on the ICND2 than did on ICND1. Thank goodness its over.

I did see quite a few questions from 9tut, but had different ip’s and such. It was hard to tell how I was fairing on the exam. I really had no idea how I was doing until the exam was over and I received my score. I had about 5 min left when I finished the exam. I think practicing on live equipment made the difference for me. I used ICND1 & ICND2 by Wendell Odom almost exclusively. I took a look at Todd Lammele Fast Pass, but I needed more explanations than were provided in the Fast Pass book. I also used the Portable Commands Guide for CCNA to drill down on commands. Going on to CCNP.

Hi all.
just want to know about vtp sim.. is that from this site or CCNA site.

i didn’t find the acl sim on this site. will you please let me know where i can find that.

@big john
hey, try on 9tut.com 🙂

http://www.9tut.com/78-ccna-access-list-sim-2
http://www.9tut.com/70-ccna-access-list-sim

I took the ICND2 today, Cisco just changed their pool of questions… but I passed with my own knowledge

I’m taking it tomorrow, any tips?? were the questions similar, just different info?

@Lowel
What about the sims? Where they the same or were different?

@ibbus
did you pass the exam???
share you views