Share your ICND2 Experience

Recently Passed ICND2 with 97x/1000. Thanks to 9tut, Heavymod, CBT nuggets, thepiratebay.se. Braindumps here 99% accurate but you should know the fundamentals!

Please someone help me with free packet tracer?

Thank you

@TrickedbyCisco

That’s what happens when you study only dumps and example test material, and don’t really try to understand the Internetworking concepts that are behind the dumps and examples. If you somehow pass the CCNA exams without understanding Internetworking and data communications concepts, you will FAIL in the workplace and marketplace.

You should have titled your post,
“TrickedByMyselfThatICouldBecomeaCCNAWithoutLearningInternetworking”!

Hi.

Have ICND2 next week any have any new dumps on Extended ACLs

Thank you

Just passed 604-816 today. Had the questions shown on this site, not 200-102. PASSED 920/1000. I am renewed CCNA yay. I passed back in 2008, but it expires in 3 years ya know. On to CCNP! I had VTP sim and the Frame Relay hotspot sim. OSPF 4-questions simlet, IPv6, the Heavydump mentioned here earlier helped tremendously!! I paid $15 for the Mac version of VCE player, totally worth it. Also used IT University Groupon package for $99 for one year. It was sorta helpful in learning concepts. And 9tut of course! Also brain dumps. I’m in shock now worked so hard so long what do I do now? The BAD part is this CCNA cost me about $900 with exam fees, it u lessons, hotel room, bleah!!!

Passed ICND 2 640-816. The exam was rather… easy. If you just go over all the questions on 9tut and the heavymod dump, the actual exam is like deja vu. You’ve seen it, and already know the answer even before reading the question… yawn. I wasn’t even excited after finishing the exam, because I already knew that I would easily pass before taking it. A few new questions that were already mentioned by others but if you get all the other questions correct, you will EASILY pass this exam with 900+. Just go over all questions and make sure that you understand the answers. For the sims, if you can imagine the whole sim in your head, the actual sim is a walk in the park. I studied about 1-2 weeks, and got 97x today. CCNA is a lot to study, but none of the material is actually hard. I was hoping for more sims in the exam, but I got the same as everyone… yawn. If you’re struggling with CCNA material, how are you going to become a CCIE? So don’t panic, relax, and just go pass the exam with great ease.

@Badman UK: thanks! I was freaked about the “Frame-relay SIM.” It’s really just a hotspot that you have to run two diagnostic commands for. The Heavymod dump covers it.

Wait…. So if I understand correctly, for the 640-816 ICND2 exam, as far as Sims go, everyone is getting the VTP, Frame Relay (more of a hotspot turned Sim), and maybe for a select few the OSPF sim.

Is that correct? So while in the latest dump there are other labs for EIGRP, Show, NAT, ACL, and CLI labs in truth NO ONE is getting those labs?

Sounds like an easy test if that’s the case…

Passed icnd2 on 20.09.13. Had VTP sim and Frame Relay simlet. Thanks to 9tut.net and examcollection

Passed today.Had VTP sim and Frame Relay simlet. Thanks to 9tut.net, examcollection and CBT nugguts

Passed today 640-816 with 846/1000. Frame Relay, VTP config using the last available host. Had OSPF SIM very easy with 4 questions. Understand the concepts. IPV6 caught me off guard a little bit. Study this complete site, subnet quick to complete VTP SIM and relax if you understand the concepts. 4 Drag and drops, Split Horizon, Access-list, VLSM and NAT. Thanks 9tut!!!! CCNP Where we come….

Jeremy Cioara
Wendell Odom (OSPF and EIGRP only)
Packet Tracer
9tut
pass4sure

Passed INCD2 with a perfect score. I got the same Sims as Cisco_rookie. One of the frame relay SIM questions almost got me when it asked for a route. Just remember to run a show ip route to get the route and then identify the dlci from the show frame relay map command. This site is very valuable to fill in the gaps. Thanks 9tut for helping me understand some of the concepts.

passed ICND2 today 846/1000 studied for 3 months using Wendell Odom ICND2 book, CBT nuggets and 9tut and how2pass. Had VTP sim and Frame Relay sim. Good number of IPv6 questions. Know the concepts and you will do fine.

scored 972 today. With that I made both CCNA and CCNP. I took the CCNP exams end of last year. Took ICND1 a few months ago and realized last week that the 640 series retires next week so I spent the weekend with a premium 9tut account and the HeavyMod file. For guys who’ve been doing this for more than a decade, start with the HeavyMod and sit the first 4 exams as if you’re taking the exam. Don’t check your answers, lock the kids out of the house, etc. If you’ve been doing any real routing, switch, etc. for any length of time, you’ll score in the high 700s or low 800s without any studying. If so, review the failed answers on your tests, study the sims, simlets, and drag and drops, and you’re good for ICND2 in a couple days.

Thanks for the tut folks for maintaining this website, I hope half these comment authors have the guts to skip a starbucks or two and throw some dough your way. If you’re working and don’t contribute, I encourage you to do so. These guys helped me get my CCNA and CCNP studying just a few days for each test… hell that’s got to be worth something.

If you’re slugging out these exams in the hopes of a better job/life I wish you all the encouragement in the world. Remember, no amount of remembering test scores is going to get you the job. I got my first job years ago because I went into the interview and talked about all the cool stuff I was doing with VPN, Firewalling, etc. If you want a job, get a ton or RAM in your computer and then run GNS3 and VMWare with some stripped down open bsd install (no GUI). In 6 months you’ll have more useable knowledge than most guys after a few years on the job.

Good luck!

For the rest of you, I had the same old stuff everybody else is talking about. VTP and Frame-relay (simlet?). Some drag and drops: ACL, OSPF vs. EIGRP, Hotspot, etc.). 80% of my questions were in the first 4 HeavyMod exams. (a,b,c,and d).

If you don’t learn anything else, learn how to quickly calculate network and broadcast from any IP/mask. Then learn how to quickly increment/decrement up through the networks. I bet you save 15 minutes and score an extra 100 points just by doing that one step.

Not just for the test, but this will make you’re life a million times easier when you’re doing the job and give you a tangible skill that 95% of your coworkers won’t have. Good luck!!!

I have a questions: An organization is concerned that too many employees are wasting company time accessing the Internet. Which access list statement would stop World Wide Web access for employees on the range of subnets from 172.16.8.0/24 to 172.16.11.0/24?

A. access-list 103 deny http 172.16.8.0 0.0.7.255 any

B. access-list 103 deny tcp 172.16.8.0 0.0.11.255 any eq 80

C. access-list 103 deny tcp 172.16.8.0 0.0.0.3 any eq 80

D. access-list 103 deny tcp 172.16.8.0 0.0.3.255 any eq 80

E. access-list 103 deny tcp any 172.16.8.0 0.0.3.255 eq 80

the answer is C, but i don’t know how they got that. Please help.

I passed !!! today I had both ICND1 & ICND2, didn’t get very high scores but A Pass is a Pass v(^_^)v

ICND1 had many questions from here as well from the VCE’s , although some of them had different wording in order to get a different answer so READ the questions twice!

ICND2 was a little harder, less time compared to ICND1 and the simlets I had were the VTP and the Frame Relay , couple of the questions were different in them as compared to the simlets in here so make sure you practice and practice.

Good luck to everyone !!!

@Gmose – the answer is D – as you need to limit only 4 subnets/networks – which that becomes a 255.255.252.0 subnet mask – 0.0.3.255 wc.

@Gmose – remember, sometimes not all the answers on the dumps are correct.. that answer C is obviously wrong because, we know from the original networks is a 172.16.8 – 11.0 /24 so automatically, you know that theres a 255 in the WC on the last octet – because we’re only “caring” about 172.16.8 – 11 and don’t care for the last octet (the hosts)

I need help. I have tried 3 times without passing the 640-816. My first attempt I got 762, second I scored 790 and third 762.

I really wish to pass with this older version, so I need help. One area I am having difficulty with is the five multiple-choice questions with scenario and topology type. Is there anywhere I can practice before I take it again by this week Friday, September 27, 2013?

Many thanks.

@TC – omg i feel your pain. took me 3 shots too – but should’ve passed on the 2nd – was only off by a question. when you say scenario/topology type – are you referring to the simulations? and yes if you’ll study the questions on this site and practice on heavymod dumps you’ll be fine. but what you want is to get familiar with the sims/commands – and the most popular sim that tends to come up for the 816 is the frame-relay and VTP sim. the VTP sim is availiable here to dl and practice on packetracer so that you can get used to the commands..good luck to you this friday.

I passed the today with 860 !!!! I didnt get the score I was aimming for but, who cares..! Thx to 9tut, cbt nuggets… The had the VTP sim, frame-relay simlet, ospf simlet, **** study drag n drops…. hope this helps somebody before the test runs out.!

hello everybody, i recently passed ICND1 & ICND2 exams. My question is, i don’t have any real
IT experience but what kind of job can i get with these certifications? I’ve been told a help desk or call center job is what’s more likely, but if any of you have had jobs in this field please let me know.

Thanks

where is Frame-Relay Sim in this website? for ICND2. please please please give me some direction. I want to prepare myself for Frame-Relay Sim, but i have not found. Pleeeeeeease guide me.

I really wanna thank 9tut and all commenters on this great site. Just passed icnd2 with 986/100, right b4 the deadline of 30 sept. , had vtp sim, FR sim, ospf simlet and many q’s from here and heavymod dump vce file. Keep up the good work!

I’m requesting again that please tell that where is Frame-Relay Sim in this website? for ICND2. please please please give me some direction. I want to prepare myself for Frame-Relay Sim, but i have not found it. Pleeeeeeease guide me.

@Imran

http://www.9tut.com/ccna-hotspot-questions Hotspot Frame-relay Question

Any one knows how long it takes for after passing the tests, for the certifications to show up on the Certification Tracking System ? ? ?

where can i get the heavymod dumps?

Imran

Don’t panic. You need to understand the concepts of Frame Relay and how is implemented first and forget about memorizing Sims. Be sure to be familiar with PPP, packet switching, circuit switching, Split Horizon, Poison Reverse etc. Here is the SIM.

http://www.9tut.com/ccna-hotspot-questions

Good Luck

Alhamdulillah !
I passed the today with 888 !!!! I didnt get the score I was aimming for bcz at 45th question i clicked next, hour glass appeared for a while and the exam ended, though it showed “Question 45 of 50”. Anyways… Thx to 9tut.
The had the VTP sim, frame-relay simlet, ospf simlet, All OSPF Questions (not OSPF Questions 2), Drag and drop 2 question 3 and Hotspot. hope this helps somebody before the test runs out.!

@Gmose

http://www.examcollection.com/640-816.html

Certs show up in tracking system usually couple of days after the exam, from my little experience

where can i fine ospf sim taking the exam on fri. need some help

failed on 3rd attempt, on this SIM (VTP) i got a weird error, something about the “default-gateway command not being avilable at this time”, it took me a while to get it to accept, it asked for the first aval ip, the default gateway was 192.168.111.1 the first switch was .2 so i used .3, not sure how i failed studied for months, pass Heaveymod everytime, studied 9tut, scored %67 on the “Config and verify vlans”. 100% on implemnt IP, 33% on ACL which i new was my weakness.. I guess i have to take the new icnd2

That’s unfortunate optimistic-tester1. All the questions I got in my exam can be found in heavymod’s set and 9tut. You should be getting 100% on all 271 questions on heavymod and on this site. If you can’t get 100% (or close enough) after covering all the questions twice, then you don’t know the material well enough. Catch up on your ACL info and NAT if you need to, as you will need those skills on the job and there’s no point getting your certification if you can’t do what’s covered in the curriculum.

That “command not available” notification pops up in the simulations if you haven’t done the command properly. Perhaps it was an error like you said, but the best thing to do if you get that notification on a command that you know you need to use is to take a step back and check that you are inputting it correctly. When I first stared my sim I got it because I got over excited and used ip default-gateway from enable mode rather than config mode. Be sure that you are in the right mode and have the correct spelling and any dashes that are needed. Also be sure you have “ip” in front of that specific command. For sims in general it is good idea to write a quick checklist on your erasable board as soon as you start to remind you to do things such as “no shutdown” and “copy run start” in all your sims.

Good luck on the new exam. Just make sure you know the material, use the dumps to check that you know it – be sure that you understand why the answers are what they are and that you could answer a similar question of the same style – and get some practice on real equipment or GNS3. If you can do that and you can score perfectly on the dumps then you should be able to get 90%+ on the exam fairly easily.

I completely SPANKED the exam 640-816 ICND Part 2!!!! 916/1000!!! 09/26/2013 CCNA achieved!! I had frame relay lab, VTP lab, OSPF questions not the lab sim, ACL questions, 1 Nat question!! Thank you sooooo much to 9tut! Heavymod and EC! CBT nuggets!!! And mostly God!!!!

Are there really some icnd1 questions on the (old) icnd2 exam ? Port-security and crossed-straight wires questions etc ? The 200-201 exam_file has none of them !

CCNA Achieved! Frame Relay Sim, VTP Sim, lots of OSPF questions. Hopefully everyone passes before sept 30th! Good luck!

WM

Frame Relay SIM

Know the concepts behind Frame Relay, PPP, Split Horizon, Hold down Timers, etc.

http://www.9tut.com/ccna-hotspot-questions

Does anyone know what the passing score for the new 200-101 exam is?

Thanks

Yes, BCham88, there are. There are several port security questions, mainly revolving around sticky mac addresses and maximum mac addresses.

The first question I got was the one that says there is a conference room and with 3 switchports but sometimes people attach hubs to them to connect more devices. How would you prevent the use of hubs? The answer is to use the port-security maximum 1 command so that only 1 mac can be associated with a port at a time.

There are 1 or 2 other port security type questions, a few cable related ones, and a few layer questions such as what layer does PPP operate at, and which layer are these problems associated with. They’re all in heavymod’s dump.

i got passed ICND2 with 916 marks, alhamdulilah, I studied only from 9tut, CBT Nuggets, youtube, google and HeavyMod. I remember only Frame-Relay sim.

Anyone , on the HEAVY MOD paper for Q 45 in section A , why is the answer 4 and not 3 . This is a NAT question , how many interfaces should be configured as IP NAT inside , how can it be 4 ???

Ouch…got a 748 this morning with 6 questions left. Vtp and frame relay sims, split horizon drop down boxes. Frame-relay sim stumped me and i shouldve just moved on so i can finish test. I used packet tracer, Llamle book, half of Odom book and 9tut….didn’t do Heavymod n I shouldve! Oh well, gotta keep trying.
Good luck to everyone else.

Just passed ICND2 this morning with a 944, Heavymod dumps, 80% of my questions were from the dumps. VTP sim was pretty easy, no frame sims i did have about 3 drag and drops, alot of OSPF questions. CCNA club…it feels great to be a part of it!!!!

So , GMose , now you are CCNA , well done !! can you explain to me ,why, on the HEAVY MOD paper for Q 45 in section A , why the is answer 4 and not 3 . This is a NAT question , how many interfaces should be configured as IP NAT inside , how can it be 4 ???

Thanks

Hello, Passed my ICND2 today score 916, thanks to pass4sure and 9tut.

Passed the CCNA today. All the questions are identical to Havymod dumps and 9tut. thanks.

Passed my ICND2 today after my second try. I knew that i was weaker on NAT, ACL, and IPV6 the first time i took it last week so i made that my main focus every day for the past week. Feels good to finally have this achievement! pass4sure, heavymod, 9tut, packet tracer, cisco learning network, and hours and hours of study time. for some reason i had a lot of ipv6 on both exams, nat, acl, vtp sim, frame-relay, ospf, eigrp, and a few drag and drops. Good luck to everyone taking it before the 30th!

All you brain dumped CCNAs ha, ha ,ha , lets see how you do when faced with a company’s aptitude test , I hope you can all brag about passing it too ,lol

passed with 832 of 825. yikes. had the VTP sim where you set the ip, default-gateway, domain and mode. OSPF simlet where you answer 5 questions about OSPF. That one showed a topology and asked several questions that are in the OSPF section of this site. Got the frame-relay sim where you have to do a show frame-relay map and show ip route to answer the questions. there were about 5 questions on Nat so make sure to review the multiple choice questions here and on heavmod. My recommendation would be to know everything on this site and be confident with the heavmod dump. Also, the choices are in a different order than on the dumps so that can throw you a bit. Good luck everyone.

I thank God i passed with 958(640-816). 9tut is very relevant… I had the vtp and frame relay sims. In the vtp sim the show running-config in the existing switch showed that the switch had not been configured with any ip address. Therefore i used the show interface vlan1 which showed only the ip address and not the default gateway.
For the ip address the first available ip address was to be used, but the default gateway was not specified and had not beeen configured on the existing switch so i used the last available ip address in the subnet.
For the frame relay sim only the show frame-relay map command gave what is needed to answer the asked 4 qsns.
The other qsns were basically fom heavymod dumps. My advice is to go through those qsns repeatedly and understand the concepts.
All the best for those preparing for these exams…

@Racko says the guy asking about heavymod dump questions…..

@Evans : u cud have used the “show startup config ” which might have showed you the default gateway….

@Racko
Yes the answer is 4 …because router1 int f0/1.1 and f0/1.2 are subinterfaces with there own ip addresses ..therefore ip nat inside will need to be configure on each subinterface. Be careful with this question which can be easily marked wrong ,if you fly through the exhibit and just notice the physical connections which idealy looks like the answer would be 3

Thanks SS , yes I get it . Yes are correct , employers are wary of dumpers . I heard my manager came back from an interview laughing , saying the candidate was a paper CCNA . I have come across CCNA holders , you give them a brand new switch and ask them to put a hostname and IP address on the switch , and they havent got a clue what to do .

I took the test today and failed cause I ran out of time, but I am going to contest it as I was only given 70 minutes which I thought that was wrong but then again I felt maybe I was wrong. After the exam I found that it should have been 95 minutes and I made sure I was taking the right exam. In fact I got everything what WLD mentioned.

WLD
September 14th, 2013

Just thought I would say that I passed ICND2 yesterday with a 972. I studied from 9tut, CBT Nuggets, Cisco press book and HeavyMod.

On the exam I had the VTP Labsim and also the Frame-Relay Sim. I had seen all questions from this site and HeavyMod except for one where it was an OSPF testlet where you have to answer how many routes R1 would learn.

Had questions on VLAN, IPV6, EIGRP, had the drag n drop with poison reverse, split horizon, holddown timers and LSA. There was also questions where you had to work out that links on the end of serial interface where not in the same network.

Good luck to all who are trying to pass before the end of the month!

Weird thing is Cisco’s website states 75 mintues for ICND2, so I am not sure why when I scheduled for the exam it said I would be given 95 minutes. The person that set me up for the exam said also stated the same. So it is 75 or 95 minutes?

@Outcast The schedule says 95 minutes, but that means the entire appointment, including signing in with the proctor and the bit of time you have before the exam starts.

Yeah I figured it out after readying the small print by Pearson Vue. Appreciate you for let me know Anonymous. Well an expensive lesson learned. Not only I need to understand the material but be able to do them fairly quick (less thinking and more instinct).

Hi could someone please provide the link forthe Frame Relay SIM.

GoodLuck to those having a final go at the exam tomorrow !

All, passed today, was a good day, hardcore revision and 9tut, heavymod all relevant…

VTP, Frame-relay, OSPF, EGIRP, ACL’s a few random questions, but UNDERSTAND THE CONCEPT and you will do fine 🙂

Good Luck to all

Passed today…Thanks 9tut.. VTP sim with different ip and other heavymod questions….

Passed yesterday – scored 1000. Thanks to 9tut + Heavymod dump

Passed yesterday..Got OSPF,VTP & Framerelay questions.- Thnks a lot 9tut,heavy mod dump….

Just passed with a 958 and off to the pub. Sims off 9tut, heavy mod over and over again and testout, along with cat vids. VTP, frame relay and vlsm drag and drop. Good luck

Just passed ICND 2 with a 9xx! VTP sim, frame relay simlet, ospf simlet and 98% of the questions were from 9tut and heavymod. Know the concepts. the answers are not in the same order of the practice questions on this site and the heavymod exams. Best of luck to everyone taking the test today as well as to those taking the new exam! Lookout CCNP, here I come!!!

passed today with perfect score 1000 (vtp and frame relay sim)

I have used cisco press ,cbt nugget, Heavymod and of course this web site.

thanks to all

Cassy

Cassy

I passed today! I saw a lot of ipv6, flow control, acls, configuring multi point and sub interfaces. I had an Show config style eigrp lab that i didn’t see on here. It was similar to the CCNA EIGRP LAB but it had another router and asked questions about routing and which networks each was advertising. Good luck everyone!

Had my ICND 2 today, cleared.., there was one set of q’s i hadn’t seen in 9tut, regarding OSPF where they talk about hello packets being xchngd b/n R3-R4 router, they also asked, how many networks would you see in the routing table (which was not part of 9tut), so make sure you understand concepts well.. Good luck!

Passed the final 640-816 today with 900+ What a relief to have got it, as I didn’t fancy studying for the new exam. Anyhow thanks 9tut, for all the info & to all those that put up posts of what they came across in their exam. Now…time for a whiskey! Cheers

I Passed ICND2 Yesterday at the 11th hour rest in peace ccna v1.0

I Passed ICND2 Yesterday at the 11th hour rest in peace ccna v1.0
9tut was the best help ever for becoming CCNA certified thank you guys God bless you for setting up this incredible source.

Have one query !!! I have ICND 1 640-822 passed n still have to get the ICND2 640-816…can i register to the new icnd 2 and get CCNA certified Or do i have to take the new icnd1 again..

@sjtt

you can take the new ICND2 and receive your CCNA once passed. Someone has already confirm this with CISCO already

Passed 0n 9/30/2013–933/1000, thanks to 9tut for such a great site and to all the posters to help me prepare–Time to move on to ccnp…….see you there.

Passed ICND2 last weekend, enjoying my week off before i start down the CCNA Voice/CCNP Voice path.

My tip to anyone going on to do the new ICND2 exam, look at teh exam questions on the website, understand them and read up on ones you dont. do as many vce dumps as possible as you will eventually see the same type of questions, again practice and read up on areas you struggle on.

You need to practice the labs, packet tracer is your friend so use it if you dont have the equipment. practice and practice. spend 2 – 4 weeks doing this every night and you will nail it. good luck.

practice questions on
http://www.ciscovce.com

Passed today. 20% of the test was Netflow, SNMP, HSRP, etc. You should have a good basic understanding off what these do for you as well as how to configure them. There were no config questions, however if you understand how to configure, the questions will be no problem.
Had a 5 router EIGRP sim. No configuration, just show run and show up route to answer the questions. There was one question that had two answers, but it didn’t say select two.
I had several drag and drop, the frame relay sim (they changed DLCIs and router names) and I think that was it.

Hi Guys
Do they combine icdn1 and icdn2 marks to get the total score of ccna?

To connect and to integrate your GNS3 with VMware Workstation/Virtual Box
for any network lab setup visit:
Connecting GNS3 with VMware Workstation
http://youtu[.]be/gT2fYDLAlhw
For more interesting tutorial on your networking career subscribe by clicking this link:
http://www[.]youtube[.]com/user/rctvids
For more to come…

Thanks for all of your help on the ICND 1 and 2. I passed the INCD2 200-101 with a score of 975/1000 on 1/16/2014. I will defently donate to this website. It is a great resourse and i hope you can keep this site up. A lot of the exam questions come from this site. My best advice is to memorize all of the info here. The new exam is 53 question in 70-75 mintues. You need to move quickly through the multiple choice questions. Do not spend more than 3-5 seconds on each of them. Spend the time on the drag & drop and the simluator questions if you want to get throught the exam in the a loted time.

thanks for all your help on ICND1 and ICND2. passed ICND2 today, was a relief.
A lot of the questions on this site was present, as well as the FHRPs.
Good Luck!

practice questions on
http://www.ciscovce.com

Have questions changed much for ICND2 exam in 2015?

Have the ICND2 question changed in Feb 2015 ? Thanks in advance

ICND2*

flooding (broadcast) and ‘Flood and Learn bahovier.’ I cover some of this bahovier here () but the summary is that when a switch receives a frame for an unknown destination (MAC not

What is cheap mlb jersey? Maybe you can ask for more here.
vic beasley jr

Has anyone taken this exam this month or last month?

Here we offer 200-105 Braindumps in PDFs and exam test engine software formats.